MagicMirror Forum
    • Recent
    • Tags
    • Unsolved
    • Solved
    • MagicMirror² Repository
    • Documentation
    • 3rd-Party-Modules
    • Donate
    • Discord
    • Register
    • Login
    A New Chapter for MagicMirror: The Community Takes the Lead
    Read the statement by Michael Teeuw here.

    Failed at the magicmirror@2.2.2 start script 'sh-run-start.sh'

    Scheduled Pinned Locked Moved Solved Troubleshooting
    41 Posts 9 Posters 33.0k Views 8 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • L Offline
      L_i_v_e
      last edited by

      Please let me know. If you make It work could you share It as an ISO ti flash? Would be so good

      1 Reply Last reply Reply Quote 0
      • C Offline
        carltonb
        last edited by

        I too am keeping abreast of this. I have had 5 installs that went so well that after the update, I can not get it installed.
        Are we the only ones having problems.
        Do the install directions need to be changed. Luckily I have backed up every sd card so I am safe, but need to figure out if I do anything to them now (besides the MM upgrade) will they crash.

        1 Reply Last reply Reply Quote 0
        • cruunnerrC Offline
          cruunnerr
          last edited by cruunnerr

          I think i figured out what went wrong ;)

          i set up a new raspbian (Desktop Version) and could install the MagicMirro without any issues.

          IMPORTANT:

          while the installation of MagicMirror (automatic installer) u will see this:

          Cloning MagicMirror Done!
          Installing dependencies ...
          npm WARN deprecated coffee-script@1.10.0: CoffeeScript on NPM has moved to "coffeescript" (no hyphen)
          npm WARN prefer global coffee-script@1.10.0 should be installed with -g
          npm WARN prefer global jsonlint@1.6.2 should be installed with -g
          
          > uws@0.14.5 install /home/pi/MagicMirror/node_modules/uws
          > node-gyp rebuild > build_log.txt 2>&1 || exit 0
          

          When u arrived this, it seems the installation is done. But wrong! just wait. it will take some time even if there is no cursor blinking.

          Just wait and you will see some more installation steps:

          0_1515181533671_Bildschirmfoto 2018-01-05 um 20.44.31.png

          Wait again:

          0_1515181564303_Bildschirmfoto 2018-01-05 um 20.44.47.png

          wait again ^^ and u will be asked if u want to use pm2. say YES! :

          0_1515181586411_Bildschirmfoto 2018-01-05 um 20.44.58.png

          Finally u will see this:

          0_1515181641602_Bildschirmfoto 2018-01-05 um 20.45.04.png

          And after a few seconds the magic mirror will start automatically and u can enjoy :D

          Edit:
          so just to get sure, here are the quick steps i did:

          1. loaded the newest raspbian stretch with desktop from here

          2. copy to SD card with ApplePi-Baker

          3. put an empty file named “ssh” on the boot directory to enable ssh

          4. start the pi

          5. via ssh sudo raspi-config
            set up some configurations like Network-Name, Screen resolution, enabled VNC, expand filesystem etc.

          6. reboot

          7. sudo apt-get update ; sudo apt-get upgrade
            this will take a while

          8. sudo rpi-update
            this will take a while, too

          9. reboot

          10. bash -c "$(curl -sL https://raw.githubusercontent.com/MichMich/MagicMirror/master/installers/raspberry.sh)"

          Then just wait! ;)

          C 1 Reply Last reply Reply Quote 0
          • C Offline
            carltonb @cruunnerr
            last edited by

            @cruunnerr said in Failed at the magicmirror@2.2.2 start script ‘sh-run-start.sh’:

            VNC

            No NPM install or other necessary pi setup as listed on the site at Configuring the Raspberry Pi?

            1 Reply Last reply Reply Quote 0
            • cruunnerrC Offline
              cruunnerr
              last edited by cruunnerr

              @carltonb said in Failed at the magicmirror@2.2.2 start script ‘sh-run-start.sh’:

              Configuring the Raspberry Pi

              Oh sorry, i enabled display rotate in the config. And to disable the screensaver i used sudo apt get install xscreensaver, then via VNC on the Desktop move to the upper left corner (the raspberry button) and go to Preference -> Screensaver and disable it.
              Maybe use sudo apt-get install unclutter to hide mouse.

              I just set it up to proof, if there are any issues ^^ So this was a quick install “guide”

              But yes, there is no extra npm install or something like that necessary.
              VNC can be enabled with raspi-config

              edit:
              oh, and keep in mind that u have to set pm2 to automatically start at reboot.

              maybe after the first restart after installation finished there is no automatically startet MagicMirror.

              https://github.com/MichMich/MagicMirror/wiki/Auto-Starting-MagicMirror

              L C 2 Replies Last reply Reply Quote 0
              • L Offline
                L_i_v_e @cruunnerr
                last edited by

                @cruunnerr lucky you… this is what i got

                pi@raspberrypi:~ $ bash -c "$(curl -sL https://raw.githubusercontent.com/MichMich/MagicMirror/master/installers/raspberry.sh)"
                
                $$\      $$\                     $$\           $$\      $$\ $$\                                          $$$$$$\
                $$$\    $$$ |                    \__|          $$$\    $$$ |\__|                                        $$  __$$\
                $$$$\  $$$$ | $$$$$$\   $$$$$$\  $$\  $$$$$$$\ $$$$\  $$$$ |$$\  $$$$$$\   $$$$$$\   $$$$$$\   $$$$$$\  \__/  $$ |
                $$\$$\$$ $$ | \____$$\ $$  __$$\ $$ |$$  _____|$$\$$\$$ $$ |$$ |$$  __$$\ $$  __$$\ $$  __$$\ $$  __$$\  $$$$$$  |
                $$ \$$$  $$ | $$$$$$$ |$$ /  $$ |$$ |$$ /      $$ \$$$  $$ |$$ |$$ |  \__|$$ |  \__|$$ /  $$ |$$ |  \__|$$  ____/
                $$ |\$  /$$ |$$  __$$ |$$ |  $$ |$$ |$$ |      $$ |\$  /$$ |$$ |$$ |      $$ |      $$ |  $$ |$$ |      $$ |
                $$ | \_/ $$ |\$$$$$$$ |\$$$$$$$ |$$ |\$$$$$$$\ $$ | \_/ $$ |$$ |$$ |      $$ |      \$$$$$$  |$$ |      $$$$$$$$\
                \__|     \__| \_______| \____$$ |\__| \_______|\__|     \__|\__|\__|      \__|       \______/ \__|      \________|
                                       $$\   $$ |
                                       \$$$$$$  |
                                        \______/
                
                Updating packages ...
                Trovato:1 https://deb.nodesource.com/node_9.x stretch InRelease
                Scaricamento di:2 http://archive.raspberrypi.org/debian stretch InRelease [25,3 kB]
                Trovato:3 http://mirrordirector.raspbian.org/raspbian stretch InRelease
                Recuperati 25,3 kB in 11s (2.260 B/s)
                Lettura elenco dei pacchetti... Fatto
                Installing helper tools ...
                Lettura elenco dei pacchetti... Fatto
                Generazione albero delle dipendenze
                Lettura informazioni sullo stato... Fatto
                build-essential is already the newest version (12.3).
                curl is already the newest version (7.52.1-5+deb9u3).
                git is already the newest version (1:2.11.0-3+deb9u2).
                unzip is already the newest version (6.0-21).
                wget is already the newest version (1.18-5+deb9u1).
                0 aggiornati, 0 installati, 0 da rimuovere e 0 non aggiornati.
                Check current Node installation ...
                Node currently installed. Checking version number.
                Minimum Node version: v5.1.0
                Installed Node version: v9.3.0
                No Node.js upgrade necessary.
                Cloning MagicMirror ...
                Cloning into 'MagicMirror'...
                remote: Counting objects: 9010, done.
                remote: Total 9010 (delta 0), reused 0 (delta 0), pack-reused 9010
                Ricezione degli oggetti: 100% (9010/9010), 11.45 MiB | 19.00 KiB/s, done.
                Risoluzione dei delta: 100% (5098/5098), done.
                Cloning MagicMirror Done!
                Installing dependencies ...
                
                > uws@0.14.5 install /home/pi/MagicMirror/node_modules/uws
                > node-gyp rebuild > build_log.txt 2>&1 || exit 0
                
                
                > electron-chromedriver@1.7.1 install /home/pi/MagicMirror/node_modules/spectron/node_modules/electron-chromedriver
                > node ./download-chromedriver.js
                
                
                > electron@1.4.15 postinstall /home/pi/MagicMirror/node_modules/electron
                > node install.js
                
                /home/pi/MagicMirror/node_modules/electron/install.js:46
                  throw err
                  ^
                
                Error: read ECONNRESET
                    at _errnoException (util.js:999:13)
                    at TLSWrap.onread (net.js:629:25)
                npm ERR! code ELIFECYCLE
                npm ERR! errno 1
                npm ERR! electron@1.4.15 postinstall: `node install.js`
                npm ERR! Exit status 1
                npm ERR!
                npm ERR! Failed at the electron@1.4.15 postinstall script.
                npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
                
                npm ERR! A complete log of this run can be found in:
                npm ERR!     /home/pi/.npm/_logs/2018-01-05T20_56_42_584Z-debug.log
                Unable to install dependencies!
                
                
                1 Reply Last reply Reply Quote 0
                • cruunnerrC Offline
                  cruunnerr
                  last edited by

                  did you set it up freshly?
                  i can’t imagine that you haven’t crashed something before. Please try a new installation of raspbian

                  1 Reply Last reply Reply Quote 0
                  • C Offline
                    carltonb @cruunnerr
                    last edited by

                    @cruunnerr Tried your method on step 10 it took almost 90 minutes to finish!!!
                    I then went to the page on Auto Starting. Followed the directions. Rebooted.
                    MagicMirror screen flashed for about 3 seconds, then it went to the desktop for another 3 to 4 seconds then it stopped at the command line.
                    If I run the logs it tells me

                    [TAILING] Tailing last 15 lines for [mm] process (change the value with --lines option)
                    /home/carltonb/.pm2/logs/mm-out-1.log last 15 lines:
                    1|mm       | > magicmirror@2.2.2 start /home/carltonb/MagicMirror
                    1|mm       | > sh run-start.sh
                    1|mm       | 
                    1|mm       | 
                    1|mm       | > magicmirror@2.2.2 start /home/carltonb/MagicMirror
                    1|mm       | > sh run-start.sh
                    1|mm       | 
                    1|mm       | 
                    1|mm       | > magicmirror@2.2.2 start /home/carltonb/MagicMirror
                    1|mm       | > sh run-start.sh
                    1|mm       | 
                    1|mm       | 
                    1|mm       | > magicmirror@2.2.2 start /home/carltonb/MagicMirror
                    1|mm       | > sh run-start.sh
                    1|mm       | 
                    
                    /home/carltonb/.pm2/logs/mm-out-0.log last 15 lines:
                    0|mm       | > magicmirror@2.2.2 start /home/carltonb/MagicMirror
                    0|mm       | > sh run-start.sh
                    0|mm       | 
                    0|mm       | 
                    0|mm       | > magicmirror@2.2.2 start /home/carltonb/MagicMirror
                    0|mm       | > sh run-start.sh
                    0|mm       | 
                    0|mm       | 
                    0|mm       | > magicmirror@2.2.2 start /home/carltonb/MagicMirror
                    0|mm       | > sh run-start.sh
                    0|mm       | 
                    0|mm       | 
                    0|mm       | > magicmirror@2.2.2 start /home/carltonb/MagicMirror
                    0|mm       | > sh run-start.sh
                    0|mm       | 
                    
                    /home/carltonb/.pm2/logs/mm-error-0.log last 15 lines:
                    0|mm       | npm ERR! npm  v3.10.10
                    0|mm       | npm ERR! path /home/carltonb/package.json
                    0|mm       | npm ERR! code ENOENT
                    0|mm       | npm ERR! errno -2
                    0|mm       | npm ERR! syscall open
                    0|mm       | 
                    0|mm       | npm ERR! enoent ENOENT: no such file or directory, open '/home/carltonb/package.json'
                    0|mm       | npm ERR! enoent ENOENT: no such file or directory, open '/home/carltonb/package.json'
                    0|mm       | npm ERR! enoent This is most likely not a problem with npm itself
                    0|mm       | npm ERR! enoent and is related to npm not being able to find a file.
                    0|mm       | npm ERR! enoent 
                    0|mm       | 
                    0|mm       | npm ERR! Please include the following file with any support request:
                    0|mm       | npm ERR!     /home/carltonb/npm-debug.log
                    0|mm       | /home/carltonb/mm.sh: line 1: cd: home/carltonb/MagicMirror: No such file or directory
                    
                    /home/carltonb/.pm2/logs/mm-error-1.log last 15 lines:
                    1|mm       | npm ERR! npm  v3.10.10
                    1|mm       | npm ERR! path /home/carltonb/package.json
                    1|mm       | npm ERR! code ENOENT
                    1|mm       | npm ERR! errno -2
                    1|mm       | npm ERR! syscall open
                    1|mm       | 
                    1|mm       | npm ERR! enoent ENOENT: no such file or directory, open '/home/carltonb/package.json'
                    1|mm       | npm ERR! enoent ENOENT: no such file or directory, open '/home/carltonb/package.json'
                    1|mm       | npm ERR! enoent This is most likely not a problem with npm itself
                    1|mm       | npm ERR! enoent and is related to npm not being able to find a file.
                    1|mm       | npm ERR! enoent 
                    1|mm       | 
                    1|mm       | npm ERR! Please include the following file with any support request:
                    1|mm       | npm ERR!     /home/carltonb/npm-debug.log
                    1|mm       | /home/carltonb/mm.sh: line 1: cd: home/carltonb/MagicMirror: No such file or directory
                    
                    0|mm       | npm
                    0|mm       |  
                    0|mm       | ERR! Linux 4.9.59-v7+
                    0|mm       | npm
                    0|mm       |  ERR! argv "/usr/bin/node" "/usr/bin/npm" "start"
                    0|mm       | npm ERR! node v6.12.3
                    0|mm       | npm ERR!
                    0|mm       |  npm  v3.10.10
                    0|mm       | npm ERR! path /home/carltonb/package.json
                    0|mm       | npm ERR! code ENOENT
                    0|mm       | npm ERR! errno -2
                    0|mm       | npm ERR! syscall open
                    0|mm       | npm
                    0|mm       |  ERR! enoent ENOENT: no such file or directory, open '/home/carltonb/package.json'
                    0|mm       | npm ERR! 
                    0|mm       | enoent ENOENT: no such file or directory, open '/home/carltonb/package.json'
                    0|mm       | npm ERR! enoent This is most likely not a problem with npm itself
                    0|mm       | npm ERR! enoent and is related to npm not being able to find a file.
                    0|mm       | npm 
                    0|mm       | ERR! enoent 
                    0|mm       | npm ERR! Please include the following file with any support request:
                    0|mm       | npm ERR!     /home/carltonb/npm-debug.log
                    0|mm       | /home/carltonb/mm.sh: line 1: cd: home/carltonb/MagicMirror: No such file or directory
                    1|mm       | npm
                    

                    What step did I miss. It seems not to find the sh run-start.sh file. I am now so confused.
                    I will see how this sorts out over the weekend and will wait until Monday to try again.

                    Mykle1M 1 Reply Last reply Reply Quote 0
                    • cruunnerrC Offline
                      cruunnerr
                      last edited by cruunnerr

                      When u say yes for using pm2 while installation, it will make a MagicMirror process by itself.

                      type pm2 status

                      If there is a task called “MagicMirror”, then try:

                      cd
                      pm2 stop MagicMirror
                      pm2 start mm.sh
                      pm2 save

                      edit: however i need to say, that 90 minutes is really really much!
                      The whole installation of the raspbian OS including the MagicMirror took me about one hour

                      and your mm.sh should look exactly like this:

                      cd MagicMirror  //here must be a wordwrap. so don't use one line
                      DISPLAY=:0 npm start
                      

                      to create this file type in console:

                      cd
                      nano mm.sh
                      adding the lines above and save with “ctrl+x” and “y”
                      chmod +x mm.sh

                      1 Reply Last reply Reply Quote 0
                      • Mykle1M Offline
                        Mykle1 Project Sponsor Module Developer @carltonb
                        last edited by Mykle1

                        @carltonb said in Failed at the magicmirror@2.2.2 start script ‘sh-run-start.sh’:

                        npm ERR! enoent ENOENT: no such file or directory, open ‘/home/carltonb/package.json’

                        Are you sure you are running npm start in the MagicMirror directory?

                        The error I quoted from your post usually indicates that you are issuing the npm start command from outside the MagicMirror directory. I can reproduce that error when NOT in the MagicMirror directory.

                        0_1515203425403_22.png

                        Create a working config
                        How to add modules

                        1 Reply Last reply Reply Quote 0
                        • 1
                        • 2
                        • 3
                        • 4
                        • 5
                        • 3 / 5
                        • First post
                          Last post
                        Enjoying MagicMirror? Please consider a donation!
                        MagicMirror created by Michael Teeuw.
                        Forum managed by Sam, technical setup by Karsten.
                        This forum is using NodeBB as its core | Contributors
                        Contact | Privacy Policy