Failed at the magicmirror@2.2.2 start script 'sh-run-start.sh'

carltonb

@cruunnerr said in Failed at the magicmirror@2.2.2 start script ‘sh-run-start.sh’:

VNC

No NPM install or other necessary pi setup as listed on the site at Configuring the Raspberry Pi?

cruunnerr

@carltonb said in Failed at the magicmirror@2.2.2 start script ‘sh-run-start.sh’:

Configuring the Raspberry Pi

Oh sorry, i enabled display rotate in the config. And to disable the screensaver i used sudo apt get install xscreensaver, then via VNC on the Desktop move to the upper left corner (the raspberry button) and go to Preference -> Screensaver and disable it.
Maybe use sudo apt-get install unclutter to hide mouse.

I just set it up to proof, if there are any issues ^^ So this was a quick install “guide”

But yes, there is no extra npm install or something like that necessary.
VNC can be enabled with raspi-config

edit:
oh, and keep in mind that u have to set pm2 to automatically start at reboot.

maybe after the first restart after installation finished there is no automatically startet MagicMirror.

https://github.com/MichMich/MagicMirror/wiki/Auto-Starting-MagicMirror

L_i_v_e

@cruunnerr lucky you… this is what i got

pi@raspberrypi:~ $ bash -c "$(curl -sL https://raw.githubusercontent.com/MichMich/MagicMirror/master/installers/raspberry.sh)"

$$\      $$\                     $$\           $$\      $$\ $$\                                          $$$$$$\
$$$\    $$$ |                    \__|          $$$\    $$$ |\__|                                        $$  __$$\
$$$$\  $$$$ | $$$$$$\   $$$$$$\  $$\  $$$$$$$\ $$$$\  $$$$ |$$\  $$$$$$\   $$$$$$\   $$$$$$\   $$$$$$\  \__/  $$ |
$$\$$\$$ $$ | \____$$\ $$  __$$\ $$ |$$  _____|$$\$$\$$ $$ |$$ |$$  __$$\ $$  __$$\ $$  __$$\ $$  __$$\  $$$$$$  |
$$ \$$$  $$ | $$$$$$$ |$$ /  $$ |$$ |$$ /      $$ \$$$  $$ |$$ |$$ |  \__|$$ |  \__|$$ /  $$ |$$ |  \__|$$  ____/
$$ |\$  /$$ |$$  __$$ |$$ |  $$ |$$ |$$ |      $$ |\$  /$$ |$$ |$$ |      $$ |      $$ |  $$ |$$ |      $$ |
$$ | \_/ $$ |\$$$$$$$ |\$$$$$$$ |$$ |\$$$$$$$\ $$ | \_/ $$ |$$ |$$ |      $$ |      \$$$$$$  |$$ |      $$$$$$$$\
\__|     \__| \_______| \____$$ |\__| \_______|\__|     \__|\__|\__|      \__|       \______/ \__|      \________|
                       $$\   $$ |
                       \$$$$$$  |
                        \______/

Updating packages ...
Trovato:1 https://deb.nodesource.com/node_9.x stretch InRelease
Scaricamento di:2 http://archive.raspberrypi.org/debian stretch InRelease [25,3 kB]
Trovato:3 http://mirrordirector.raspbian.org/raspbian stretch InRelease
Recuperati 25,3 kB in 11s (2.260 B/s)
Lettura elenco dei pacchetti... Fatto
Installing helper tools ...
Lettura elenco dei pacchetti... Fatto
Generazione albero delle dipendenze
Lettura informazioni sullo stato... Fatto
build-essential is already the newest version (12.3).
curl is already the newest version (7.52.1-5+deb9u3).
git is already the newest version (1:2.11.0-3+deb9u2).
unzip is already the newest version (6.0-21).
wget is already the newest version (1.18-5+deb9u1).
0 aggiornati, 0 installati, 0 da rimuovere e 0 non aggiornati.
Check current Node installation ...
Node currently installed. Checking version number.
Minimum Node version: v5.1.0
Installed Node version: v9.3.0
No Node.js upgrade necessary.
Cloning MagicMirror ...
Cloning into 'MagicMirror'...
remote: Counting objects: 9010, done.
remote: Total 9010 (delta 0), reused 0 (delta 0), pack-reused 9010
Ricezione degli oggetti: 100% (9010/9010), 11.45 MiB | 19.00 KiB/s, done.
Risoluzione dei delta: 100% (5098/5098), done.
Cloning MagicMirror Done!
Installing dependencies ...

> uws@0.14.5 install /home/pi/MagicMirror/node_modules/uws
> node-gyp rebuild > build_log.txt 2>&1 || exit 0


> electron-chromedriver@1.7.1 install /home/pi/MagicMirror/node_modules/spectron/node_modules/electron-chromedriver
> node ./download-chromedriver.js


> electron@1.4.15 postinstall /home/pi/MagicMirror/node_modules/electron
> node install.js

/home/pi/MagicMirror/node_modules/electron/install.js:46
  throw err
  ^

Error: read ECONNRESET
    at _errnoException (util.js:999:13)
    at TLSWrap.onread (net.js:629:25)
npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! electron@1.4.15 postinstall: `node install.js`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the electron@1.4.15 postinstall script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/pi/.npm/_logs/2018-01-05T20_56_42_584Z-debug.log
Unable to install dependencies!

cruunnerr

did you set it up freshly?
i can’t imagine that you haven’t crashed something before. Please try a new installation of raspbian

carltonb

@cruunnerr Tried your method on step 10 it took almost 90 minutes to finish!!!
I then went to the page on Auto Starting. Followed the directions. Rebooted.
MagicMirror screen flashed for about 3 seconds, then it went to the desktop for another 3 to 4 seconds then it stopped at the command line.
If I run the logs it tells me

[TAILING] Tailing last 15 lines for [mm] process (change the value with --lines option)
/home/carltonb/.pm2/logs/mm-out-1.log last 15 lines:
1|mm       | > magicmirror@2.2.2 start /home/carltonb/MagicMirror
1|mm       | > sh run-start.sh
1|mm       | 
1|mm       | 
1|mm       | > magicmirror@2.2.2 start /home/carltonb/MagicMirror
1|mm       | > sh run-start.sh
1|mm       | 
1|mm       | 
1|mm       | > magicmirror@2.2.2 start /home/carltonb/MagicMirror
1|mm       | > sh run-start.sh
1|mm       | 
1|mm       | 
1|mm       | > magicmirror@2.2.2 start /home/carltonb/MagicMirror
1|mm       | > sh run-start.sh
1|mm       | 

/home/carltonb/.pm2/logs/mm-out-0.log last 15 lines:
0|mm       | > magicmirror@2.2.2 start /home/carltonb/MagicMirror
0|mm       | > sh run-start.sh
0|mm       | 
0|mm       | 
0|mm       | > magicmirror@2.2.2 start /home/carltonb/MagicMirror
0|mm       | > sh run-start.sh
0|mm       | 
0|mm       | 
0|mm       | > magicmirror@2.2.2 start /home/carltonb/MagicMirror
0|mm       | > sh run-start.sh
0|mm       | 
0|mm       | 
0|mm       | > magicmirror@2.2.2 start /home/carltonb/MagicMirror
0|mm       | > sh run-start.sh
0|mm       | 

/home/carltonb/.pm2/logs/mm-error-0.log last 15 lines:
0|mm       | npm ERR! npm  v3.10.10
0|mm       | npm ERR! path /home/carltonb/package.json
0|mm       | npm ERR! code ENOENT
0|mm       | npm ERR! errno -2
0|mm       | npm ERR! syscall open
0|mm       | 
0|mm       | npm ERR! enoent ENOENT: no such file or directory, open '/home/carltonb/package.json'
0|mm       | npm ERR! enoent ENOENT: no such file or directory, open '/home/carltonb/package.json'
0|mm       | npm ERR! enoent This is most likely not a problem with npm itself
0|mm       | npm ERR! enoent and is related to npm not being able to find a file.
0|mm       | npm ERR! enoent 
0|mm       | 
0|mm       | npm ERR! Please include the following file with any support request:
0|mm       | npm ERR!     /home/carltonb/npm-debug.log
0|mm       | /home/carltonb/mm.sh: line 1: cd: home/carltonb/MagicMirror: No such file or directory

/home/carltonb/.pm2/logs/mm-error-1.log last 15 lines:
1|mm       | npm ERR! npm  v3.10.10
1|mm       | npm ERR! path /home/carltonb/package.json
1|mm       | npm ERR! code ENOENT
1|mm       | npm ERR! errno -2
1|mm       | npm ERR! syscall open
1|mm       | 
1|mm       | npm ERR! enoent ENOENT: no such file or directory, open '/home/carltonb/package.json'
1|mm       | npm ERR! enoent ENOENT: no such file or directory, open '/home/carltonb/package.json'
1|mm       | npm ERR! enoent This is most likely not a problem with npm itself
1|mm       | npm ERR! enoent and is related to npm not being able to find a file.
1|mm       | npm ERR! enoent 
1|mm       | 
1|mm       | npm ERR! Please include the following file with any support request:
1|mm       | npm ERR!     /home/carltonb/npm-debug.log
1|mm       | /home/carltonb/mm.sh: line 1: cd: home/carltonb/MagicMirror: No such file or directory

0|mm       | npm
0|mm       |  
0|mm       | ERR! Linux 4.9.59-v7+
0|mm       | npm
0|mm       |  ERR! argv "/usr/bin/node" "/usr/bin/npm" "start"
0|mm       | npm ERR! node v6.12.3
0|mm       | npm ERR!
0|mm       |  npm  v3.10.10
0|mm       | npm ERR! path /home/carltonb/package.json
0|mm       | npm ERR! code ENOENT
0|mm       | npm ERR! errno -2
0|mm       | npm ERR! syscall open
0|mm       | npm
0|mm       |  ERR! enoent ENOENT: no such file or directory, open '/home/carltonb/package.json'
0|mm       | npm ERR! 
0|mm       | enoent ENOENT: no such file or directory, open '/home/carltonb/package.json'
0|mm       | npm ERR! enoent This is most likely not a problem with npm itself
0|mm       | npm ERR! enoent and is related to npm not being able to find a file.
0|mm       | npm 
0|mm       | ERR! enoent 
0|mm       | npm ERR! Please include the following file with any support request:
0|mm       | npm ERR!     /home/carltonb/npm-debug.log
0|mm       | /home/carltonb/mm.sh: line 1: cd: home/carltonb/MagicMirror: No such file or directory
1|mm       | npm

What step did I miss. It seems not to find the sh run-start.sh file. I am now so confused.
I will see how this sorts out over the weekend and will wait until Monday to try again.

cruunnerr

When u say yes for using pm2 while installation, it will make a MagicMirror process by itself.

type pm2 status

If there is a task called “MagicMirror”, then try:

cd
pm2 stop MagicMirror
pm2 start mm.sh
pm2 save

edit: however i need to say, that 90 minutes is really really much!
The whole installation of the raspbian OS including the MagicMirror took me about one hour

and your mm.sh should look exactly like this:

cd MagicMirror  //here must be a wordwrap. so don't use one line
DISPLAY=:0 npm start

to create this file type in console:

cd
nano mm.sh
adding the lines above and save with “ctrl+x” and “y”
chmod +x mm.sh

Mykle1

@carltonb said in Failed at the magicmirror@2.2.2 start script ‘sh-run-start.sh’:

npm ERR! enoent ENOENT: no such file or directory, open ‘/home/carltonb/package.json’

Are you sure you are running npm start in the MagicMirror directory?

The error I quoted from your post usually indicates that you are issuing the npm start command from outside the MagicMirror directory. I can reproduce that error when NOT in the MagicMirror directory.

carltonb

Back home and started again.
Ran npm start in the /home/carltonb/MagicMirror directory here is the result

carltonb@clock:~/MagicMirror $ npm start

> magicmirror@2.2.2 start /home/carltonb/MagicMirror
> sh run-start.sh


npm ERR! Linux 4.9.75-v7+
npm ERR! argv "/usr/bin/node" "/usr/bin/npm" "start"
npm ERR! node v6.12.3
npm ERR! npm  v3.10.10
npm ERR! code ELIFECYCLE
npm ERR! magicmirror@2.2.2 start: `sh run-start.sh`
npm ERR! Exit status 1
npm ERR! 
npm ERR! Failed at the magicmirror@2.2.2 start script 'sh run-start.sh'.
npm ERR! Make sure you have the latest version of node.js and npm installed.
npm ERR! If you do, this is most likely a problem with the magicmirror package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR!     sh run-start.sh
npm ERR! You can get information on how to open an issue for this project with:
npm ERR!     npm bugs magicmirror
npm ERR! Or if that isn't available, you can get their info via:
npm ERR!     npm owner ls magicmirror
npm ERR! There is likely additional logging output above.

npm ERR! Please include the following file with any support request:
npm ERR!     /home/carltonb/MagicMirror/npm-debug.log
carltonb@clock:~/MagicMirror $

Followed cowboydude instructions for installing. This time it took about 10 minutes to install MM.
What is my next step.
Also thank all of you for taking the time to help a poor soul out.
carltonb

carltonb

Just discovered that I have two installs of MM one in /home and one at /home/carltonb. Have to figure out why it is installed twice. When I did the bash for the install command I may not have specified directories. I will try again in a few hours.

cruunnerr

Well, what should i say…

I installed the MMM-Podcast a few days ago and had some trouble with it, since it didn’t download newer videos…
However, i tried a little bit to get it working (don’t know exactly what i did) and since there i thought it is running like it should.
But wrong… it was only working, cause my MMM-watchdog module restarts the mirror automatically 1-3 times a day (Heartbeat timeout).
Why am i telling this?
Cause i got the exactly same message as you … o.0

But different than you, my mirror is working at all except that it restarts some time.

First i did what is showing in the message… i updated node and npm Version.
node from 6.12.2 to 9.2.1
ppm from 3.10.10 to 5.5.1

I flushed pm2 logs and now i am waiting if the problem comes up again.

Sorry that i can’t help you at all, but i am also trying to figure out what that could be.

what OS are you running? Jesse or stretch? lite or desktop version?