Read the statement by Michael Teeuw here.
[MMM-Dreambox] to connect a Dreambox or a Enigma2 Receiver (like VU or VU+) to MagicMirror and stream stations via omxplayer
-
I did some furter bugfixing:
- bugfixing the “http:8001” problem
Please check the dev branch of my module:
Rename your MMM-Dreambox folder to _MMM-Dreambox (for example)
do agit clone --branch dev https://github.com/Ax-LED/MMM-Dreambox.git
in your modules folderNow the module should work with dreambox, no matter if the dreambox uses a separat port or not.
Regards
AxLED
-
I found 1 ‘issue’ in the /web/about on my 1 tuner VU+zero:
(had to put spaces after and before < and > ; forum issue)< e2servicename >< /e2servicename >
On the OpenWebif is shows “Nothing running …”.
As if it is on standby.This is what I get on my 2 tuner VU+ solo2, when on:
< e2servicename >Das Erste HD< /e2servicename >< e2servicename >
And when it is in standby:
< e2servicename >< /e2servicename >
Did not look at the other xml output in detail yet.
So, when /web/about does not find a service, hence null, it should be replaced by “Nothing running …”.
-
@evroom
I never tried my module in dreambox standby, as i dont use it. My dreambox is on or in deep standby.
Can you please try with your receivers (Dreambox or VU)on
?AxLED
-
@axled said in [MMM-Dreambox] to connect a Dreambox or a Enigma2 Receiver (like VU or VU+) to MagicMirror and stream stations via omxplayer:
Now the module should work with dreambox, no matter if the dreambox uses a separat port or not.
I can confirm that with or without port, streaming works.
-
@evroom said in [MMM-Dreambox] to connect a Dreambox or a Enigma2 Receiver (like VU or VU+) to MagicMirror and stream stations via omxplayer:
Error: null in http://192.168.178.47/web/about
I checked with some of the files you send me (all different 3 VU+ about xmls), the work in my environment. Is your VU+ maybe also in standby mode?
AxLED
-
@axled said in [MMM-Dreambox] to connect a Dreambox or a Enigma2 Receiver (like VU or VU+) to MagicMirror and stream stations via omxplayer:
Can you please try with your receivers (Dreambox or VU) on?
VU+ Solo2:
When on /web/about shows the service name.
When in standby it shows no service name.Dreambox dm7020hd:
When on /web/about shows the service name.
When in standby it shows no service name.So, the same.
When I use the Dreambox for the module, there are NO errors.
The service list is shown.When I use the VU+ for the module, there are errors.
The service list is NOT shown.
The errors are different when in standby (/web/about) and when on (/web/epgnow).Could you please also print the errors in the pm2 log ?
Now on the Mirror I see Error for 30 seconds and then Error: for 2 seconds. -
Btw,
VU+ Solo2:
Works. Both when on or in soft-standby.
-
@axled said in [MMM-Dreambox] to connect a Dreambox or a Enigma2 Receiver (like VU or VU+) to MagicMirror and stream stations via omxplayer:
I never tried my module in dreambox standby, as i dont use it. My dreambox is on or in deep standby.
When in deep standby I would expect that you will see
< e2servicename >< /e2servicename >
for /web/about.
And as you do not see an error, I fail to see the difference with the VU+ in soft-standby.But in deep standby, you cannot stream, can you ?
Will the playable services then be none ?Cannot test this now without being killed by the family :-)
-
@evroom said in [MMM-Dreambox]:
Cannot test this now without being killed by the family
@evroom
Welcome to my world :-)I have another idea:
Did you check/compare the settings on your tuners (dreambox vs. VU+).
I case of my dreambox (DM800SE) they are under:- Erweiterungen -> Webinterface
- Extensions -> Webinterface (maybe the spelling is different, as i translated them into english)
This is a screenshot of my actual setting (i only played around with the HTTP Port to fix some earlier bugs):
AxLED
-
For VU+ Solo2:
Port is 80 and HTTP authentication on yes.
Will set HTTP authentication to no and try again.
I see now, there is also a separate OpenWebif config:
This uses port 81 and indeed works.
Looks totally different from the Webif.
Interesting.For the Dreambox I cannot find a menu item like this.
I still use the original Dreambox OE2.0 image.