[MMM-Dreambox] to connect a Dreambox or a Enigma2 Receiver (like VU or VU+) to MagicMirror and stream stations via omxplayer

Cr4z33

@evroom said in [MMM-Dreambox] to connect a Dreambox or a Enigma2 Receiver (like VU or VU+) to MagicMirror and stream stations via omxplayer:

Hope that the ‘baby’ will be a real baby and I wish you and your partner all the best.

Lol no it’s actually my first MM mirror. :face_with_stuck-out_tongue_winking_eye:

If there will be any improvement into getting Vu+ devices to work I will be trying it in a Duo² dual DVB-S / DVB-T tuner decoder.

evroom

@cr4z33 said in [MMM-Dreambox] to connect a Dreambox or a Enigma2 Receiver (like VU or VU+) to MagicMirror and stream stations via omxplayer:

Lol no it’s actually my first MM mirror.

Hahahaha :-)
You got me there !!!
I did notice the baby in quotes, but the ‘born’ and ‘if everything goes well’ twisted my mind.
Very funny.

Well, in fact there are simularities:
It takes a while before it can walk.
It crashes sometimes, but always recovers.
It causes problems on daily basis.
It can cause you to sleep bad.
But you still love it.

AxLed

@evroom

I did some furter bugfixing:

bugfixing the “http:8001” problem

Please check the dev branch of my module:
Rename your MMM-Dreambox folder to _MMM-Dreambox (for example)
do a git clone --branch dev https://github.com/Ax-LED/MMM-Dreambox.git in your modules folder

Now the module should work with dreambox, no matter if the dreambox uses a separat port or not.

Regards

AxLED

evroom

I found 1 ‘issue’ in the /web/about on my 1 tuner VU+zero:
(had to put spaces after and before < and > ; forum issue)

< e2servicename >< /e2servicename >

On the OpenWebif is shows “Nothing running …”.
As if it is on standby.

This is what I get on my 2 tuner VU+ solo2, when on:

< e2servicename >Das Erste HD< /e2servicename >< e2servicename >

And when it is in standby:

< e2servicename >< /e2servicename >

Did not look at the other xml output in detail yet.

So, when /web/about does not find a service, hence null, it should be replaced by “Nothing running …”.

AxLed

@evroom
I never tried my module in dreambox standby, as i dont use it. My dreambox is on or in deep standby.
Can you please try with your receivers (Dreambox or VU) on?

AxLED

evroom

@axled said in [MMM-Dreambox] to connect a Dreambox or a Enigma2 Receiver (like VU or VU+) to MagicMirror and stream stations via omxplayer:

Now the module should work with dreambox, no matter if the dreambox uses a separat port or not.

I can confirm that with or without port, streaming works.

AxLed

@evroom said in [MMM-Dreambox] to connect a Dreambox or a Enigma2 Receiver (like VU or VU+) to MagicMirror and stream stations via omxplayer:

Error: null in http://192.168.178.47/web/about

I checked with some of the files you send me (all different 3 VU+ about xmls), the work in my environment. Is your VU+ maybe also in standby mode?

AxLED

evroom

@axled said in [MMM-Dreambox] to connect a Dreambox or a Enigma2 Receiver (like VU or VU+) to MagicMirror and stream stations via omxplayer:

Can you please try with your receivers (Dreambox or VU) on?

VU+ Solo2:

When on /web/about shows the service name.
When in standby it shows no service name.

Dreambox dm7020hd:

When on /web/about shows the service name.
When in standby it shows no service name.

So, the same.

When I use the Dreambox for the module, there are NO errors.
The service list is shown.

When I use the VU+ for the module, there are errors.
The service list is NOT shown.
The errors are different when in standby (/web/about) and when on (/web/epgnow).

Could you please also print the errors in the pm2 log ?
Now on the Mirror I see Error for 30 seconds and then Error: for 2 seconds.

evroom

Btw,

VU+ Solo2:

http://192.168.178.46/web/epgnow?bRef=1%3A7%3A1%3A0%3A0%3A0%3A0%3A0%3A0%3A0%3AFROM BOUQUET "userbouquet.favourites.tv" ORDER BY bouquet

Works. Both when on or in soft-standby.

evroom

@axled said in [MMM-Dreambox] to connect a Dreambox or a Enigma2 Receiver (like VU or VU+) to MagicMirror and stream stations via omxplayer:

I never tried my module in dreambox standby, as i dont use it. My dreambox is on or in deep standby.

When in deep standby I would expect that you will see

< e2servicename >< /e2servicename >

for /web/about.
And as you do not see an error, I fail to see the difference with the VU+ in soft-standby.

But in deep standby, you cannot stream, can you ?
Will the playable services then be none ?

Cannot test this now without being killed by the family :-)