Read the statement by Michael Teeuw here.
My First Mirror... until now ^^
-
@cruunnerr ok I think this is the right way and I understand it with the led pin on Pin16
… Just the flickering looks not good… I try a other power consumption……can I only fade the LEDs or can I make a light like a animation around my mirror?
Thanks for your help … And so fast.
This is a good forum for me…
Thx to all guys
-
Well, if i had to do that project gain, i would not choose the RGB-5050 stripes again…
I would directly get WS2812, because u just need one PWM Pin and with that you were able to do things like animations…
In another project (infinity table) i choosed this one and was pretty amused :)
-
Yes. But what is the difference between WS2812, WS2812, neopixel…
What is the best stripe with a good price…
I think a meter for 60 euro is to much…Greetings from Saxony, Germany
-
I have got this one. 5m with 60 LEDs per meter for about 17€
-
@cruunnerr very good deal.
But what is the difference in the product options… blue or black pcm … -
Mensch… du sprichst bestimmt deutsch…
Wie hast du die Temperatur Module angebunden?Etwa mit wlan esp’s ?
-
Blau und schwarz beschreibt nur die Farbe des Streifens selber (nicht der LED). Also für die Funktion egal.
Naja, also die Temperaturen kommen von meinem IoBroker Server. Um ehrlich zu sein habe ich schon länger nicht mehr an meinem Spiegel gearbeitet, sondern andere Projekte gestartet und vollendet.
Mein ganzes Haus ist mittlerweile steuerbar (Licht, Thermostate, Lautsprecher etc…). Unter anderem habe ich eben auch Temperatursensoren von Xiaomi im Einsatz, die ihre Werte an meinen Server schicken.
Auf dem Spiegel zeige ich die Werte dann mit dem MMM-iobroker Modul an.Aber ich habe auch viel mit ESP’s gemacht. Habe derzeit ca. 8 Stück im Einsatz. Einer steuert meine komplette Heizung. Einer steuert meine Klingel. Einer wertet meine Alarmanlage aus. Zwei sind für meinen Infinity Tisch… etc. pp… ^^
Macht ziemlich viel Spaß
Blue and black only describes the color of the strip itself (not the LED). So no matter for the function.
Well, so the temperatures come from my IoBroker server. To be honest, I have not worked on my mirror for some time, but started and completed other projects.
My whole house is now controllable (lights, thermostats, speakers etc …). Among other things, I have also used temperature sensors from Xiaomi, which send their values to my server.
On the mirror I then display the values with the [MMM-iobroker] (https://github.com/ioBroker/MMM-ioBroker) module.But I also did a lot of ESP’s. Currently have about 8 pieces in use. One controls my entire heater. One controls my bell. One evaluates my alarm system. Two are for my infinity table … etc. pp … ^^
It’s a lot of fun -
Ja mach schon Spass…
Wollte auch einen openhub installieren … auf einem raspi Zero… Mal schauen ob das was wird… Meine ESP usb serial programmer hardware kommt erst noch.
Wollte die Temperaturwerte mit mmm-rest auslesen… Mal schauen… Ich danke dir jedenfalls für die tips -
@cruunnerr hello sir,
I have pir sensor & relay. I followed exactly step 5.2 in your tutorial (https://forum.magicmirror.builders/topic/6291/howto-turn-on-off-your-monitor-time-based-pir-button-app/2?page=1). but it doesn’t work for me.
The relay is off but when there is movement through the sensor, the relay does not turn back on. please help me.
I’m sorry my English is not very good -
The mirror looks amazing and I’ve been able to glean some inspiration. Thanks for posting!
