Read the statement by Michael Teeuw here.
Raspberry Pi 4 Released !
-
@dazza120 Pi 4 has been running for 10 hours now and no issues. Had never been able to run the Pi 3 overnight so I think we have a winner!
-
@SH20192 are you using any cooling system and if yes what? :)
-
@Cr4z33 said in Raspberry Pi 4 Released !:
@SH20192 are you using any cooling system and if yes what? :)
Yes, a small fan on an open plexiglass case. No heatsink. Without the fan it would complain about overheating.
Should mention it’s running 4 RTSP streams.
-
@SH20192 MM system works without changes on Raspbian Buster with the new kernel?
I’m positively surprised…
Gotta order a second one. Lol! -
@lavolp3 said in Raspberry Pi 4 Released !:
@SH20192 MM system works without changes on Raspbian Buster with the new kernel?
I’m positively surprised…
Gotta order a second one. Lol!Can I just upgrade the Pi 3 to the Buster OS so i can just swap the ssd over. Can someone confirm if it’s a plug and play boot from OS on an SSD? Rather than through the bios bit to enable it. Really looking forward to this PI I might get a heat sink but I want a big one not the little ones, need to see if I still have the one from the sky box, got a fan already for it but only activates when the TV is on
-
@lavolp3 said in Raspberry Pi 4 Released !:
@SH20192 MM system works without changes on Raspbian Buster with the new kernel?
I’m positively surprised…
Gotta order a second one. Lol!Except for the one module mentioned above everything working for me on Buster. Haven’t looked at logs or anything to see if there are errors being thrown that I don’t notice but so far so good.
-
@SH20192 I see.
I will start with an old Intel heatsink.
I got very good cooling results with a Rock Pi 4 B so I don’t think it will be any worse hehe.
-
@Cr4z33 said in Raspberry Pi 4 Released !:
@SH20192 I see.
I will start with an old Intel heatsink.
I got very good cooling results with a Rock Pi 4 B so I don’t think it will be any worse hehe.
Would that even fit on the Pi?
-
Unfortunately didn’t make it 24 hours of being up. :(
-
@SH20192 said in Raspberry Pi 4 Released !:
Unfortunately didn’t make it 24 hours of being up. :(
Nooooooooooo with that spec I wouldn’t have thought there would be any problems 🤦🏾♂️😢
-
@dazza120 ouch correct. :smiling_face_with_open_mouth_cold_sweat:
On the other board I could place it on the bottom side while on the Rpi you can’t.
-
@dazza120 said in Raspberry Pi 4 Released !:
@SH20192 said in Raspberry Pi 4 Released !:
Unfortunately didn’t make it 24 hours of being up. :(
Nooooooooooo with that spec I wouldn’t have thought there would be any problems 🤦🏾♂️😢
Me too. The first test I just lost the HDMI signal but it seemed to be up. Second test it all locked up around 4 hours in.
-
@SH20192 just out of curiosity were you running MagicMirror?
And if so were you running MMM-Spotify?
I ask because last update of this module is giving me a black screen.My Rpi 4 arrived a couple of hours ago, but I still have to take it out of the box.
-
@Cr4z33 black screen means error in the UI code… so, open the developers window, ctrl-shift-i, select the console tab, and scroll up to find the error…
-
@Cr4z33 said in Raspberry Pi 4 Released !:
@SH20192 just out of curiosity were you running MagicMirror?
And if so were you running MMM-Spotify?
I ask because last update of this module is giving me a black screen.My Rpi 4 arrived a couple of hours ago, but I still have to take it out of the box.
Yes to MagicMirror. Only thing running on it. I was not running Spotify.
-
@SH20192 said in Raspberry Pi 4 Released !:
@Cr4z33 said in Raspberry Pi 4 Released !:
@SH20192 just out of curiosity were you running MagicMirror?
And if so were you running MMM-Spotify?
I ask because last update of this module is giving me a black screen.My Rpi 4 arrived a couple of hours ago, but I still have to take it out of the box.
Yes to MagicMirror. Only thing running on it. I was not running Spotify.
is it over heating? ETA prime has his overclocked to 1.7Ghz CPU and 600Mhz on the GPU 😳 it must be on fire 🔥 😂
-
@dazza120 said in Raspberry Pi 4 Released !:
@SH20192 said in Raspberry Pi 4 Released !:
@Cr4z33 said in Raspberry Pi 4 Released !:
@SH20192 just out of curiosity were you running MagicMirror?
And if so were you running MMM-Spotify?
I ask because last update of this module is giving me a black screen.My Rpi 4 arrived a couple of hours ago, but I still have to take it out of the box.
Yes to MagicMirror. Only thing running on it. I was not running Spotify.
is it over heating? ETA prime has his overclocked to 1.7Ghz CPU and 600Mhz on the GPU 😳 it must be on fire 🔥 😂
Probably not. There was a fan on it.
-
My issue with the Pi and MM is different.
After installing MM, configuring autostart I rebooted, but now the max resolution is 1024x768… 😣
-
@Cr4z33 said in Raspberry Pi 4 Released !:
My issue with the Pi and MM is different.
After installing MM, configuring autostart I rebooted, but now the max resolution is 1024x768… 😣
OK problem sorted and… one suggestion for every body going to buy a Rpi 4:
DO NOT USE MICRO HDMI TO HDMI ADAPTER! IT’S CRAP AND CAUSES ISSUES WITH HDMI RESOLUTION!
-
@Cr4z33 crap that’s all I have PS there is a new update of buster out now see if that is any better, I’m just upgrading my pi 3B+ From stretch to buster does any one know if it boots from SSD as standard? Oh well guess I’ll find out soon😬
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login