Mirror starts not correct

Mykle1

@thedk said in Mirror starts not correct:

When i reboot or just unplug the Pi

I hope you’re shutting down correctly before pulling the plug on the Pi. Your SD card will likely become corrupted. Just something you should think about.

sdetweil

@Mykle1 one of my sd cards suddenly became read only… no fix…

had to buy new sd card

thedk

@Mykle1
I just unplug the Pi sometimes since he is not starting anymore
I know thats not the best way, it’s my 4th Pi ;)

Mykle1

@thedk said in Mirror starts not correct:

I just unplug the Pi sometimes since he is not starting anymore

You can’t choose “Shut Down” from the desktop? Once the shut down is complete, THEN pull the plug to power down the Pi

Mykle1

@sdetweil said in Mirror starts not correct:

one of my sd cards suddenly became read only… no fix…
had to buy new sd card

Sux! :-(

thedk

@Mykle1
No i cant. I just can reboot or shutdown the Pi by Terminal.
I know i shouldnt unplug the Pi ^^

thedk

Jusat am month ago, it starts again, but with an other fault

0|mm  | > magicmirror@2.8.0 start /home/pi/MagicMirror
0|mm  | > sh run-start.sh
0|mm  | /home/pi/MagicMirror/node_modules/electron/dist/electron: relocation error: /home/pi/MagicMirror/node_modules/electron/dist/libffmpeg.so: symbol cnprantf, version GLIBC_2.4 not defined in file libc.so.6 with link time reference
0|mm  | npm
0|mm  |  ERR! file sh
0|mm  | npm ERR! code ELIFECYCLE
0|mm  | npm ERR! errno ENOENT
0|mm  | npm ERR! syscall spawn
0|mm  | npm
0|mm  |  ERR! magicmirror@2.8.0 start: `sh run-start.sh`
0|mm  | npm ERR! spawn ENOENT
0|mm  | npm
0|mm  |  ERR!
0|mm  | npm ERR! Failed at the magicmirror@2.8.0 start script.
0|mm  | npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
0|mm  | npm ERR! A complete log of this run can be found in:
0|mm  | npm ERR!     /home/pi/.npm/_logs/2019-08-12T05_54_45_996Z-debug.log

I didnt changed anything, the error came from one day to the other an i just see the startscreen and the mirror wont start.

Could somebody help?

mumblebaj

@thedk Have you upgraded your installation of Raspbian before updating the MM? You would also have to check every module folder that has a package.json and run npm install in the module folder. This has generally worked for most of the guys with the same issue as you have.

thedk

I didnt upgrade, i made an complete new installation cause of the issue i had before.

Since two days the mirror has no error and everything goes fine, dont know why. I made no upgrade or similar but will do this now. Maybe the issue is gone with that.

Thanks for your help.

mumblebaj

@thedk Please remember to check every module folder that has a package.json in it and run npm install in those folders as well.