Problem with the Module "email"

sdetweil

i don’t see that on my console… I see

password
use your phone
2-step verification

mumblebaj

@sdetweil Strange. I had to generate a key to get email to work. Not sure why you guys don’t see the option.

Edit:
Maybe because your 2FA is turned off.

sdetweil

@mumblebaj yes, had to turn on 2fa… hate that

CyruS1337

I do not see it either. I see the same as sdetweil. I’ve also approved third-party apps with account access on this page below.

Can I do something that would help you? Post a log or something. You just have to tell me the command;)

sdetweil

@CyruS1337 you have to turn on 2 step verification (2 factor authentication aka 2fa)

mumblebaj

@CyruS1337 I just setup the module and created my app key and email is working for me.
0_1567699562380_1486bf00-438f-4fa7-8443-bbc25b2cf9ca-image.png

And my config: I also had to change fade to false in order for email to display properly

                module: 'email',
                position: 'top_right',
                header: 'Email',
                config: {
                         accounts: [
                                {
                                        user: 'xxxxxxxxxxxxx@gmail.com',
                                        password: 'xxxxxxxxxxxxxxxx',
                                        host:'imap.gmail.com',
                                        port: 993,
                                        tls: true,
                                        authTimeout: 10000,
                                        numberOfEmails: 5,
                                }
                        ],
                        fade: false,
                        maxCharacters: 30
                }
        },

CyruS1337

Good Morning

So I activated the 2FA and replaced the generated key with my password. I also took your config and added my username and password from 2FA. Unfortunately, as before, there is still “load” and it does not show any emails.

CyruS1337

If i enter npm start dev he following will come out:

npm ERR! path /home/pi/package.json
npm ERR! code ENOENT
npm ERR! errno -2
npm ERR! syscall open
npm ERR! enoent ENOENT: no such file or directory, open '/home/pi/package.json'
npm ERR! enoent This is related to npm not being able to find a file.
npm ERR! enoent

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/pi/.npm/_logs/2019-09-06T07_07_27_973Z-debug.log

sdetweil

@CyruS1337 u need to be in the MagicMirror folder before npm start

mumblebaj

@CyruS1337 I assume that you meant that you replace your password with the generated key? When you run pm2 logs what do you get? Does it show anything for email? Have you in the /modules/email folder run npm install?

CyruS1337

@sdetweil

That’s right, sorry

> magicmirror@2.8.0 start /home/pi/MagicMirror
> sh run-start.sh "dev"

Starting MagicMirror: v2.8.0
Loading config ...
Loading module helpers ...
No helper found for module: alert.
Initializing new module helper ...
Module helper loaded: updatenotification
No helper found for module: clock.
Initializing new module helper ...
Module helper loaded: MMM-SystemStats
Initializing new module helper ...
Module helper loaded: MMM-Remote-Control
Initializing new module helper ...
Module helper loaded: MMM-MyCommute
Initializing new module helper ...
Module helper loaded: MMM-AVStock
Initializing new module helper ...
Module helper loaded: MMM-GoogleMapsTraffic
Initializing new module helper ...
Module helper loaded: MMM-SoccerLiveScore
Initializing new module helper ...
Module helper loaded: email
Initializing new module helper ...
Module helper loaded: MMM-MyCalendar
All module helpers loaded.
Starting server on port 8080 ...
Server started ...
Connecting socket for: updatenotification
Connecting socket for: MMM-SystemStats
Connecting socket for: MMM-Remote-Control
Starting node helper for: MMM-Remote-Control
Connecting socket for: MMM-MyCommute
====================== Starting node_helper for module [MMM-MyCommute]
Connecting socket for: MMM-AVStock
Connecting socket for: MMM-GoogleMapsTraffic
Starting node_helper for module: MMM-GoogleMapsTraffic
Connecting socket for: MMM-SoccerLiveScore
MMM-SoccerLiveScore helper started...
Connecting socket for: email
email helper started ...
Connecting socket for: MMM-MyCalendar
Starting node helper for: MMM-MyCalendar
Sockets connected & modules started ...
Whoops! There was an uncaught exception...
{ Error: listen EADDRINUSE 0.0.0.0:8080
    at Server.setupListenHandle [as _listen2] (net.js:1330:14)
    at listenInCluster (net.js:1378:12)
    at doListen (net.js:1492:7)
    at process._tickCallback (internal/process/next_tick.js:63:19)
    at Function.Module.runMain (internal/modules/cjs/loader.js:755:11)
    at startup (internal/bootstrap/node.js:241:19)
    at bootstrapNodeJSCore (internal/bootstrap/node.js:579:3)
  errno: 'EADDRINUSE',
  code: 'EADDRINUSE',
  syscall: 'listen',
  address: '0.0.0.0',
  port: 8080 }
MagicMirror will not quit, but it might be a good idea to check why this happened. Maybe no internet connection?
If you think this really is an issue, please open an issue on GitHub: https://github.com/MichMich/MagicMirror/issues
Launching application.

CyruS1337

@mumblebaj

Exactly, I replaced the password with the key. I have also installed npm.

cd MagicMirror/modules
cd email
npm install

npm WARN email@0.0.1 No repository field.
npm WARN email@0.0.1 No license field.

audited 24 packages in 2.521s
found 0 vulnerabilities

pm2 logs

pi@raspberrypi_LOL:~/MagicMirror/modules/email $ pm2 logs
[TAILING] Tailing last 15 lines for [all] processes (change the value with --lines option)
/home/pi/.pm2/pm2.log last 15 lines:
PM2        | 2019-09-07T04:30:05: PM2 log: App [mm:0] online
PM2        | 2019-09-07T07:40:45: PM2 log: Process 0 in a stopped status, starting it
PM2        | 2019-09-07T07:40:45: PM2 log: Stopping app:mm id:0
PM2        | 2019-09-07T07:40:46: PM2 log: pid=20666 msg=failed to kill - retrying in 100ms
PM2        | 2019-09-07T07:40:46: PM2 log: App [mm:0] exited with code [0] via signal [SIGINT]
PM2        | 2019-09-07T07:40:46: PM2 log: pid=20666 msg=process killed
PM2        | 2019-09-07T07:40:46: PM2 log: App [mm:0] starting in -fork mode-
PM2        | 2019-09-07T07:40:46: PM2 log: App [mm:0] online
PM2        | 2019-09-07T07:55:09: PM2 log: Process 0 in a stopped status, starting it
PM2        | 2019-09-07T07:55:09: PM2 log: Stopping app:mm id:0
PM2        | 2019-09-07T07:55:10: PM2 log: pid=5504 msg=failed to kill - retrying in 100ms
PM2        | 2019-09-07T07:55:10: PM2 log: App [mm:0] exited with code [0] via signal [SIGINT]
PM2        | 2019-09-07T07:55:10: PM2 log: pid=5504 msg=process killed
PM2        | 2019-09-07T07:55:10: PM2 log: App [mm:0] starting in -fork mode-
PM2        | 2019-09-07T07:55:10: PM2 log: App [mm:0] online

/home/pi/.pm2/logs/mm-error.log last 15 lines:
0|mm       | SyntaxError: Unexpected token u in JSON at position 0
0|mm       |     at JSON.parse (<anonymous>)
0|mm       |     at Request._callback (/home/pi/MagicMirror/modules/MMM-SoccerLiveScore/node_helper.js:146:29)
0|mm       |     at self.callback (/home/pi/MagicMirror/node_modules/request/request.js:185:22)
0|mm       |     at Request.emit (events.js:182:13)
0|mm       |     at Request.onRequestError (/home/pi/MagicMirror/node_modules/request/request.js:881:8)
0|mm       |     at ClientRequest.emit (events.js:182:13)
0|mm       |     at TLSSocket.socketErrorListener (_http_client.js:382:9)
0|mm       |     at TLSSocket.emit (events.js:182:13)
0|mm       |     at emitErrorNT (internal/streams/destroy.js:82:8)
0|mm       |     at emitErrorAndCloseNT (internal/streams/destroy.js:50:3)
0|mm       | ATTENTION: default value of option force_s3tc_enable overridden by environment.
0|mm       | (node:5525) [DEP0005] DeprecationWarning: Buffer() is deprecated due to security and usability issues. Please use the Buffer.alloc(), Buffer.allocUnsafe(), or Buffer.from() methods instead.
0|mm       | ATTENTION: default value of option force_s3tc_enable overridden by environment.
0|mm       | (node:7860) [DEP0005] DeprecationWarning: Buffer() is deprecated due to security and usability issues. Please use the Buffer.alloc(), Buffer.allocUnsafe(), or Buffer.from() methods instead.

/home/pi/.pm2/logs/mm-out.log last 15 lines:
0|mm       | Connecting socket for: email
0|mm       | email helper started ...
0|mm       | Connecting socket for: MMM-MyCalendar
0|mm       | Starting node helper for: MMM-MyCalendar
0|mm       | Sockets connected & modules started ...
0|mm       | Launching application.
0|mm       | [AVSTOCK] Initialized.
0|mm       | Working notification system. Notification: MMM-GOOGLE_MAPS_TRAFFIC-GET payload:  { style: 'standard' }
0|mm       | listening for emails...
0|mm       | Create new calendar fetcher for url: https://calendar.google.com/calendar/ical/zeptrion%40gmail.com/private-75149d8982f910a209e0fe7d0363d75f/basic.ics - Interval: 300000
0|mm       | NEW MAIL
0|mm       | NEW MAIL
0|mm       | NEW MAIL
0|mm       | NEW MAIL
0|mm       | NEW MAIL

sdetweil

@CyruS1337 MMM-SoccerLiveScore/ is the one throwing the error… not email

CyruS1337

I have disabled the module, but the mails are still not displayed :(

/*{
	module: 'MMM-SoccerLiveScore',
	position: 'top_right',
	header: 'Fussball Rangliste',
	config: {
		leagues: [215,399,1],
        showNames: true,
        showLogos: true,
        displayTime: 60 * 1000,
        showTables: true
	}
},*/

sdetweil

@CyruS1337 i don’t know anything about email module, i remember it was hard to get working, i didn;t like the results…

anyhow… for the commenting out module,
you can also just add

disabled: true,

to the module info, before/after the module name

disabled: false,
is the default

CyruS1337

@sdetweil I do not really like the module any more. I’m trying to get it up and running for a year :)

Thank you very much for your great support

mumblebaj

@CyruS1337 Please remember, for the emails to display you need to set fade: false.