YAPi0 Installer Stretch Lite

bdream · Sep 20, 2019, 10:29 AM

@ stuartiannaylor

That sounds like exacly what I’m looking for :thumbs_up:

I finished my first MagicMirror and looking for tuning options.
As exp. I would like to small the case a bit and would be happy to use Rpi0 instead of Rpi3.

I followed your instruction “MagicMirror-Install-Guide-Raspberry-0-to-3”

I installed a new raspbian “Raspbian Buster with desktop”
may this cause my issues not using “Raspbian Buster Lite”?

I run in problem with command

cd ~/MagicMirror/ && npm install

as I got many WARN and ERR messages. I’m not alowed to attach because the file type is .log so I will paste only the WARN and ERR instead of the whole log-file.

11359 timing action:extract Completed in 111604ms
11360 silly extract lodash@^4.17.13 extracted to /home/pi/MagicMirror/node_modules/.staging/lodash-dee8f977 (111572ms)
11361 warn tar ENOENT: no such file or directory, open '/home/pi/MagicMirror/node_modules/.staging/moment-fbf25dd9/min/moment-with-locales.js'
11362 warn tar ENOENT: no such file or directory, open '/home/pi/MagicMirror/node_modules/.staging/lodash-20df1054/core.min.js'
11363 warn tar ENOENT: no such file or directory, open '/home/pi/MagicMirror/node_modules/.staging/lodash-24d00653/core.min.js'
.
.
.
// many similar WARN messages
.
.
.
12301 warn tar ENOENT: no such file or directory, open '/home/pi/MagicMirror/node_modules/.staging/rrule-21671673/dist/es5/rrule-tz.js.map'
12302 timing stage:rollbackFailedOptional Completed in 170ms
12303 timing stage:runTopLevelLifecycles Completed in 545603ms
12304 silly saveTree magicmirror@2.8.0
12304 silly saveTree ├─┬ chai-as-promised@7.1.1
12304 silly saveTree │ └── check-error@1.0.2
12304 silly saveTree ├─┬ chai@4.2.0
12304 silly saveTree │ ├── assertion-error@1.1.0
.
.
12304 silly saveTree │   ├── parse-ms@1.0.1
12304 silly saveTree │   └── plur@1.0.0
12304 silly saveTree └── valid-url@1.0.9
12305 warn grunt-stylelint@0.11.1 requires a peer of stylelint@^10.0.0 but none is installed. You must install peer dependencies yourself.
12306 verbose type system
12307 verbose stack FetchError: request to https://registry.npmjs.org/valid-url/-/valid-url-1.0.9.tgz failed, reason: getaddrinfo EAI_AGAIN registry.npmjs.org registry.npmjs.org:443
12307 verbose stack     at ClientRequest.req.on.err (/home/pi/.config/versions/node/v10.16.3/lib/node_modules/npm/node_modules/node-fetch-npm/src/index.js:68:14)
12307 verbose stack     at ClientRequest.emit (events.js:198:13)
12307 verbose stack     at TLSSocket.socketErrorListener (_http_client.js:392:9)
12307 verbose stack     at TLSSocket.emit (events.js:198:13)
12307 verbose stack     at emitErrorNT (internal/streams/destroy.js:91:8)
12307 verbose stack     at emitErrorAndCloseNT (internal/streams/destroy.js:59:3)
12307 verbose stack     at process._tickCallback (internal/process/next_tick.js:63:19)
12308 verbose cwd /home/pi/MagicMirror
12309 verbose Linux 4.19.66+
12310 verbose argv "/home/pi/.config/versions/node/v10.16.3/bin/node" "/home/pi/.config/versions/node/v10.16.3/bin/npm" "install"
12311 verbose node v10.16.3
12312 verbose npm  v6.9.0
12313 error code EAI_AGAIN
12314 error errno EAI_AGAIN
12315 error request to https://registry.npmjs.org/valid-url/-/valid-url-1.0.9.tgz failed, reason: getaddrinfo EAI_AGAIN registry.npmjs.org registry.npmjs.org:443
12316 verbose exit [ 1, true ]

Any idea :nerd_face: what to do getting the RasPi0 run?
Hold in mind what happen in case of newer MagicMirror software or other updates need to run automaticly.

Many thanks, bdream

sdetweil · Sep 20, 2019, 12:13 PM

@bdream try my updated installer, I am working to get this to replace the current version…

see https://forum.magicmirror.builders/topic/10171/anyone-want-to-try-updated-installer
others have reported it works ok on Pi zero

rename the MagicMirror folder or remove it before running the installer

bdream · Sep 20, 2019, 2:33 PM

ok, many thanks! :grinning_face: I will try it now.
Just deleted the MagicMirror folder…

If I understand you correctly the new script will replace the old one as:

~~curl -o- https://raw.githubusercontent.com/creationix/nvm/v0.34.0/install.sh | bash~~

bash -c "$(curl -sL https://www.dropbox.com/s/rlh710ng0zwv3vp/raspberry.sh?dl=0)"

but all other in your manual will stay. Right?

CU, bdream

sdetweil · Sep 20, 2019, 2:35 PM

@bdream the installer also fixes pm2 and the screen saver
and creates a log of the install process results

i don’t think u will need the other steps in the pi0 manual anymore

bdream · Sep 22, 2019, 8:26 AM

thanks for this info, so I know what to do if my attempt to fix first installation only by deleting /MagicMirror and start your script fails :frowning_face: :winking_face:. And it failed :frowning_face:

I get a new “Raspbian Buster Lite” now and start again :nerd_face:

Will let you know about the outcome. It will take long time :sleeping_face:

Best gerads, bdream

sdetweil · Sep 22, 2019, 11:51 AM

@bdream said in YAPi0 Installer Stretch Lite:

start your script fails . And it failed

please post the contents of ~/install.log

bdream · Sep 22, 2019, 7:03 PM

Ohh sdetweil, my bad. I overwrote the SD-card already with the new image. I have to learn how to work with forum and being sensitive for upcoming questions/requests.

For now I started your script again an it seems it’s running :sleeping_face:

I wonder as I have on screen a warning

npm WARN npm npm does not support Node.js v10.15.2
npm WARN npm You should probably upgrade to a newer version of node as we
npm WARN npm can't make promises that npm will work with this version.
npm WARN npm Supported releases of Node.js are the latest releases of 4, 6, 7, 8, 9.
npm WARN npm You can find the latest version at https://nodejs.org/
/usr/local/bin/npm -> /usr/local/lib/node_modules/npm/bin/npm-cli.js
/usr/local/bin/npx -> /usr/local/lib/node_modules/npm/bin/npx-cli.js
+ npm@6.11.3
added 430 packages from 833 contributors in 433.321s
npm installation Done!
Cloning MagicMirror ...
Klone nach 'MagicMirror' ...
remote: Enumerating objects: 315, done.
remote: Counting objects: 100% (315/315), done.
remote: Compressing objects: 100% (282/282), done.
remote: Total 315 (delta 39), reused 193 (delta 21), pack-reused 0
Empangene Obekte: 100% (315/315), 655.08 KiB | 867.00 KiB/s, Fertig.
Löse Unterschiede auf: 100% (39/39), Fertig.
Cloning MagicMirror Done!
Installing dependencies ...
npm WARN deprecated time-grunt@2.0.0: Deprecated because Grunt is practically unmaintained. Move on to something better. This package will continue to work with Grunt v1, but it will not receive any updates.

> electron-chromedriver@1.8.0 install /home/pi/MagicMirror/node_modules/electron-chromedriver
> node ./download-chromedriver.js

That is the position cursor is blinking and nothing change since a long time.

Here you are the install.log from actual running? installation.

install starting  - So Sep 22 18:22:15 CEST 2019
installing on armv6l processor system
forcing armv71 architecture for pi 0
[96mUpdating packages ...[90m
[96mInstalling helper tools ...[90m
[96mCheck current Node installation ...[0m
[93mNode.js is not installed.[0m
[96mInstalling Node.js ...[90m
[92mNode.js installation Done! version=v10.15.2[0m
[96mCheck current NPM installation ...[0m
[93mnpm is not installed.[0m
[96mInstalling npm ...[90m
upgrading npm to latest
[92mnpm installation Done![0m
[96mCloning MagicMirror ...[90m
[92mCloning MagicMirror Done![0m
[96mInstalling dependencies ...[90m

Cheers, bdream

bdream · Sep 23, 2019, 2:09 PM

Oh boy, so bad.

Maybe I don’t understand what I’m doing here.

install.log has not changed but MM ist also not running.
After I stopped above stated blinking curser with Ctrl - C

> electron-chromedriver@1.8.0 install /home/pi/MagicMirror/node_modules/electron-chromedriver
> node ./download-chromedriver.js

I did install MM

cd ~/MagicMirror
npm install

after I did

npm install pm@latest -g

what failed.
I’m :pouting_face:
Do I go total wrong way here?
Where is my fault?

Maybe it’s that I’m not clear in what will your script do and what have I to do additional and in which sequence?

Have you any advise to me please?

Many thanks fpor your help! bdream

sdetweil · Sep 23, 2019, 6:45 PM

@bdream my script should do EVERYTHING…

the chromedriver install had a problem…

can u do this

cd /home/pi/MagicMirror/node_modules/electron-chromedriver
node ./download-chromedriver.js

and show me what the results are…

thanks

bdream · Sep 24, 2019, 9:03 AM

Hi Sam,
as I get Error replaying with code inside:
I will attach requested resukt as jpg-file

cheers, bdream