Read the statement by Michael Teeuw here.
How to start
-
@lavolp3 Thank You!
-
There is a really nice installation guide from @KirAsh4 that will tell you every thing you need to know!
-
@ganget
Very good guidance! -
Hey together :)
I’m new and could install the software, but i can’t connect to the mirror per localhost for the admin tool.
Should i install apache2 and put the software to /var/www/html? Or can i run it without @ http://magicmirror?Greets :)
Dodo -
@Dodo88 No, you usually don’t need to do those things, the mirror should run by itself, but you need to use port 8080.
Take care of the following:
- Go into your config.js and look for the “address” parameter. It needs to be
address: "0.0.0.0",
- visit your mirror from your browser via:
http://localhost:8080
If it doesn’t work, try visiting your mirror from another computer using:http://magicmirror:8080
-Report if it works :-)
- Go into your config.js and look for the “address” parameter. It needs to be
-
Hey :)
No it doesn’t work :(
I get this error by trying “http://192.168.178.33:8080”
"Die Website ist nicht erreichbar192.168.178.33 hat die Verbindung abgelehnt.
Versuchen Sie Folgendes:Verbindung prüfen
ERR_CONNECTION_REFUSED"Should i post my config.js?
-
@Dodo88 said in How to start:
I’m new and could install the software, but i can’t connect to the mirror per localhost for the admin tool.
there is no ‘admin’ tool on MagicMirror
also, localhost mean the machine I’m on. so if you are using a windows machine to connect to the mirror, and use localhost, that mean on the windows machine…
in addition to what @lavolp3 said, you also need to clear out the ipWhitelist to look like this
ipWhitelist: []
which means ‘allow anyone to connect’
-
-
@lavolp3 said in How to start:
what is that? none of my machines know where ‘magicmirror’ is located… (I have 6 different instances running, all installed from the same script)
-
@sdetweil Guess you’re right. Thanks for highlighting. I may have changed the hostname manually at my main mirror