MMM-AlarmClock

axellejamous

Thank you so much for this module, it’s amazing and really easy to use!

I was wondering however, if I would want to let’s say set the alarm through some buttons attached to my pi, would it be best to try and inject lines into the config file (which seems sloppy to me) or can I set it through the js file directly? Or do I just make a second setnextalarm function?

strawberry 3.141

@axellejamous you cannot do that via the config. I suggest you to create a module which is handling your buttons and sending a SET_ALARM notification. Then you need to enhance the alarm module by listening to that notification and set the alarm accordingly.

axellejamous

@strawberry-3.141 I understand, that’s actually really useful thank you! Can I pass parameters with a socketnotification?

strawberry 3.141

@axellejamous yes additional data gets passed in the payload, see documentation https://github.com/MichMich/MagicMirror/blob/master/modules/README.md#thissendnotificationnotification-payload

strawberry 3.141

I refactored the module and switched to nunjuck templates.

I’m looking for people who are willing to test it:

combinations of config options
new config option popup

how to test:

if not already done, clone the repository to your modules cd ~/MagicMirror/modules/ && git clone https://github.com/fewieden/MMM-AlarmClock.git
go to the module cd ~/MagicMirror/modules/MMM-AlarmClock
run git checkout develop
test various config options

[card:fewieden/MMM-AlarmClock]

nobita

@fewieden

If I would like to add repeat time again like as
1st alarm alert at 8:00 am
2nd alarm alert at 12:00 pm
3rd alarm alart at 5:00 pm

How can i config
Thanks

yawns

{
    module: 'MMM-AlarmClock',
    position: 'top_right',
    config: {
        alarms: [
            {time: "08:30", days: [0,1,2,3,4,5,6], title: "1st Alarm", message: "This is your first alarm", sound: "alarm.mp3"},
            {time: "00:00", days: [0,1,2,3,4,5,6], title: "2nd Alarm", message: "This is your second alarm", sound: "alarm.mp3"},
            {time: "17:00", days: [0,1,2,3,4,5,6], title: "3rd Alarm", message: "This is your third alarm", sound: "alarm.mp3"}
        ]
    }
}

Currently these 3 alarms are active for all seven days of the week, where Sunday is 0 !

nobita

to anyone

how to develop Alarmclock can adjust time and message in MMM-Remote-Control like as

replace set in config.js
Thanks

strawberry 3.141

Just released version 2.0.1

Fixed sound fading for alerts
Added Korean translations

https://github.com/fewieden/MMM-AlarmClock

[card:fewieden/MMM-AlarmClock]

gaudouy

Hello strawberry 3.141,
Thanks for the update 🙂
Do you think you will add a functionality for add/delete/update alarm from the Magic Mirror(with touch screen) ?
Thanks for advance
Gaudouy

strawberry 3.141

@gaudouy this would be a huge change. It would be easier to have a module like remote control sending a notification with an alert, as there the whole UI component exists already. then in this module, you would merge the alert with the config alerts. See comments above.

innovation

Hello! I have configured the module and it is working very well. However the alarm doesn’t stop. I want it to ring and display for only 5 seconds. How do I do that?

And is there a way to hide the “Work: Wed, 12:41pm” on the left top?
Would really appreciate the help.

strawberry 3.141

@innovation with the following config it stops after 5 seconds.

{
  module: "MMM-AlarmClock",
  position: "top_left",
  config: {
    alarms: [
      {
        time: "16:15",
        days: [0,1,2,3,4,5,6],
        title: "Test",
        message: "some alarm message"
      }
    ],
    timer: 5000
  }
},

If you add the following to the custom.css file it will hide the module from the screen, but still, show the alert:

.MMM-AlarmClock {
  display: none;
}

innovation

@strawberry-3-141 Thank you! Works perfectly

strawberry 3.141

2.0.2

Fixed

Timing of alert click handler registration

Link to module https://github.com/fewieden/MMM-AlarmClock