MMM-AssistantMk2 (v3)

A Former User

@electros said in MMM-AssistantMk2 (v3):

it hides the modules on the screen apart of calendarext

it’s a know bug of calendarext

I tried to use that file “with-radio_fr.js” but when I say “cheriefm”

ah … “cheriefm” is the name of the block (like a landmark)
the think to say is “mets chérie fm” in the sample.
you can try to change it for your language with pattern value

exemple: if you change pattern value to radio test
if you say : radio test it will reconize the cheriefm command and execute it (send to A2D mp3 link of the radio and img)

electros

@Bugsounet said in MMM-AssistantMk2 (v3):

it’s a know bug of calendarext

okay but couldn’t remain all the modules on the screen behind the assistant window?

ah … “cheriefm” is the name of the block (like a landmark)

the think to say is “mets chérie fm” in the sample.

you can try to change it for your language with pattern value

exemple: if you change pattern value to radio test

if you say : radio test it will reconize the cheriefm command and execute it (send to A2D mp3 link of the radio and img)

Well I need to practice more with this. for a start I think I should look for another microphone, the assistant doesn’t really understand what I’m saying.
Do you think a respeaker board with 2 microphones would be better than a USB microphone?

Serge

@electros said in MMM-AssistantMk2 (v3):

I think I should look for another microphone, the assistant doesn’t really understand what I’m saying

One possible solution for mic

Working on getting a good hardware solution for MMM-AssistantMK2

electros

@Serge Thank you for the link i was looking for a solution like that.

jimmydew

Hey everyone, I have a problem with the MMM-assistantMk2:
The Icon is showing on the mirror, when i click on it in VNC it activates,and works. but it doesnt activate by my voice on the mirror.
any ideas? these are my configs:

var config = {
	address: "localhost", // Address to listen on, can be:
	                      // - "localhost", "127.0.0.1", "::1" to listen on loopback interface
	                      // - another specific IPv4/6 to listen on a specific interface
	                      // - "0.0.0.0", "::" to listen on any interface
	                      // Default, when address config is left out or empty, is "localhost"
	port: 8080,
	ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], // Set [] to allow all IP addresses
	                                                       // or add a specific IPv4 of 192.168.1.5 :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
	                                                       // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	useHttps: false, 		// Support HTTPS or not, default "false" will use HTTP
	httpsPrivateKey: "", 	// HTTPS private key path, only require when useHttps is true
	httpsCertificate: "", 	// HTTPS Certificate path, only require when useHttps is true

	language: "en",
	timeFormat: 24,
	units: "metric",
	// serverOnly:  true/false/"local" ,
			     // local for armv6l processors, default
			     //   starts serveronly and then starts chrome browser
			     // false, default for all  NON-armv6l devices
			     // true, force serveronly mode, because you want to.. no UI on this device

	modules: [

		{
			module: "clock",
			position: "top_left"
		},
		{
			module: "calendar",
			header: "US Holidays",
			position: "top_left",
			config: {
				calendars: [
					{
						symbol: "calendar-check",
						url: "webcal://www.calendarlabs.com/ical-calendar/ics/76/US_Holidays.ics"					}
				]
			}
		},
		{
			module: "compliments",
			position: "lower_third"
		},
		{
			module: "currentweather",
			position: "top_right",
			config: {
				location: "New York",
				locationID: "", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
				appid: "YOUR_OPENWEATHER_API_KEY"
			}
		},
		{
			module: "weatherforecast",
			position: "top_right",
			header: "Weather Forecast",
			config: {
				location: "New York",
				locationID: "5128581", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
				appid: "YOUR_OPENWEATHER_API_KEY"
			}
		},
		{
			module: "newsfeed",
			position: "bottom_bar",
			config: {
				feeds: [
					{
						title: "New York Times",
						url: "http://www.nytimes.com/services/xml/rss/nyt/HomePage.xml"
					}
				],
				showSourceTitle: true,
				showPublishDate: true,
				broadcastNewsFeeds: true,
				broadcastNewsUpdates: true
			}
		},{
  module: "MMM-AssistantMk2",
  position: "top_left",
  config: {
    debug: false,
    ui: "Classic", // Classic2, Classic or Simple
    // if you want Google Nest ui style
    // set Fullscreen ui AND fullscreen_above position
    assistantConfig: {
      projectId: "", // Required to use gaction.
      modelId: "", // (OPTIONAL for gaction)
      instanceId: "", // (OPTIONAL for gaction)
      latitude: 52.0955919,
      longitude: 4.4711253,
    },
    responseConfig: {
      useHTML5: true, // sound render by HTML5
      useScreenOutput: true,
      useAudioOutput: true,
      useChime: true,
      timer: 5000,
      myMagicWord: true,
      //Your prefer sound play program.
      //By example, if you are running this on OSX, `afplay` could be available.
      //by default mpg321 play program is enabled
      //if audio output cutting try with mpg123 or cvlc program
      playProgram: "mpg321",
      chime: {
        beep: "beep.mp3",
        error: "error.mp3",
        continue: "continue.mp3",
        open: "Google_beep_open.mp3",
        close: "Google_beep_close.mp3",
      },
      // false - animated icons, 'standby' - static icons only for standby state, true - all static icons
      useStaticIcons: false
    },
    micConfig: { // put there configuration generated by auto-installer
      recorder: "arecord",
      device: "plughw:1",
    },
    customActionConfig: {
      autoMakeAction: false,
      autoUpdateAction: false, // in RPI, gaction CLI might have some trouble.(current version should be 2.2.4, but for linux-arm, Google haven't updated) so leave this as false in RPI. I don't know it is solved or not.
      actionLocale: "en-US", // At this moment, multi-languages are not supported, sorry. Someday I'll work.
    },
    recipes: [ "with-MMM-TelegramBot.js" ],
    profiles: {
      "default": {
        profileFile: "default.json",
        lang: "en-US"
      }
    },
    useA2D: false,
    A2DStopCommand: "stop",
    useSnowboy: true,
    snowboy: {
      audioGain: 2.0,
      Frontend: true,
      Model: "jarvis",
      Sensitivity: null
    },
  },
},

	]

};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}

(it’s running on raspberry pi 4b)

A Former User

useSnowboy: true,

if you use this feature, you need to update AMk2

npm run update

try this in AMk2 directory
and enable snowboy library (and electron rebuild for snowboy)

sdetweil

@jimmydew in the future please use the markdown for code

select the text and hit the </> icon above the editor

jimmydew

@Bugsounet
i got quite a few errors on the rebuild:

✖ Rebuild Failed

An unhandled error occurred inside electron-rebuild
make: Entering directory '/home/pi/MagicMirror/modules/MMM-AssistantMk2/node_modules/@bugsounet/snowboy/build'
  CXX(target) Release/obj.target/snowboy/lib/snowboy.o
In file included from /home/pi/.electron-gyp/6.1.7/include/node/v8-internal.h:14,
                 from /home/pi/.electron-gyp/6.1.7/include/node/v8.h:25,
                 from /home/pi/.electron-gyp/6.1.7/include/node/node.h:63,
                 from ../../../nan/nan.h:56,
                 from ../lib/snowboy.cc:1:
/home/pi/.electron-gyp/6.1.7/include/node/v8config.h:326:49: warning: ‘MicrotasksCompletedCallback’ is deprecated [-Wdeprecated-declarations]
   declarator __attribute__((deprecated(message)))
                                                 ^
/home/pi/.electron-gyp/6.1.7/include/node/v8.h:8205:3: note: in expansion of macro ‘V8_DEPRECATE_SOON’
   V8_DEPRECATE_SOON("Use *WithData version.",
   ^~~~~~~~~~~~~~~~~
/home/pi/.electron-gyp/6.1.7/include/node/v8config.h:326:49: warning: ‘MicrotasksCompletedCallback’ is deprecated [-Wdeprecated-declarations]
   declarator __attribute__((deprecated(message)))
                                                 ^
/home/pi/.electron-gyp/6.1.7/include/node/v8.h:8214:3: note: in expansion of macro ‘V8_DEPRECATE_SOON’
   V8_DEPRECATE_SOON("Use *WithData version.",
   ^~~~~~~~~~~~~~~~~
In file included from ../lib/snowboy.cc:1:
../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’:
../../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
     , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete)
                                                              ^
../lib/snowboy.cc: In constructor ‘SnowboyDetect::SnowboyDetect(const string&, const string&)’:
../lib/snowboy.cc:38:31: warning: catching polymorphic type ‘class std::runtime_error’ by value [-Wcatch-value=]
   } catch (std::runtime_error e) {
                               ^
In file included from ../../../nan/nan.h:56,
                 from ../lib/snowboy.cc:1:
../lib/snowboy.cc: At global scope:
/home/pi/.electron-gyp/6.1.7/include/node/node.h:572:43: warning: cast between incompatible function types from ‘void (*)(Nan::ADDON_REGISTER_FUNCTION_ARGS_TYPE)’ {aka ‘void (*)(v8::Local<v8::Object>)’} to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type]
       (node::addon_register_func) (regfunc),                          \
                                           ^
/home/pi/.electron-gyp/6.1.7/include/node/node.h:606:3: note: in expansion of macro ‘NODE_MODULE_X’
   NODE_MODULE_X(modname, regfunc, NULL, 0)  // NOLINT (readability/null_usage)
   ^~~~~~~~~~~~~
../lib/snowboy.cc:183:1: note: in expansion of macro ‘NODE_MODULE’
 NODE_MODULE(SnowboyDetect, SnowboyDetect::Init)
 ^~~~~~~~~~~
In file included from /home/pi/.electron-gyp/6.1.7/include/node/node.h:63,
                 from ../../../nan/nan.h:56,
                 from ../lib/snowboy.cc:1:
/home/pi/.electron-gyp/6.1.7/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = node::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)]’:
/home/pi/.electron-gyp/6.1.7/include/node/node_object_wrap.h:84:78:   required from here
/home/pi/.electron-gyp/6.1.7/include/node/v8.h:9810:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<node::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type]
                reinterpret_cast<Callback>(callback), type);
                ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/pi/.electron-gyp/6.1.7/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = Nan::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)]’:
../../../nan/nan_object_wrap.h:65:61:   required from here
/home/pi/.electron-gyp/6.1.7/include/node/v8.h:9810:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<Nan::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type]
  SOLINK_MODULE(target) Release/obj.target/snowboy.node
/usr/bin/ld: cannot find -lcblas
collect2: error: ld returned 1 exit status
make: *** [snowboy.target.mk:143: Release/obj.target/snowboy.node] Error 1
make: Leaving directory '/home/pi/MagicMirror/modules/MMM-AssistantMk2/node_modules/@bugsounet/snowboy/build'
gyp ERR! build error 
gyp ERR! stack Error: `make` failed with exit code: 2
gyp ERR! stack     at ChildProcess.onExit (/home/pi/MagicMirror/modules/MMM-AssistantMk2/node_modules/node-gyp/lib/build.js:194:23)
gyp ERR! stack     at ChildProcess.emit (events.js:198:13)
gyp ERR! stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:248:12)
gyp ERR! System Linux 5.4.35-v7l+
gyp ERR! command "/usr/bin/node" "/home/pi/MagicMirror/modules/MMM-AssistantMk2/node_modules/.bin/node-gyp" "rebuild" "--target=6.1.7" "--arch=arm" "--dist-url=https://www.electronjs.org/headers" "--build-from-source" "--module_name=snowboy" "--module_path=/home/pi/MagicMirror/modules/MMM-AssistantMk2/node_modules/@bugsounet/snowboy/lib/node/binding/Release/electron-v6.1-linux-arm" "--remote_path=./snowboy/v1.4.7/Release/" "--package_name=snowboy-v1.4.7-electron-v6.1-linux-arm.tar.gz" "--host=https://github.com/bugsounet/snowboy"
gyp ERR! cwd /home/pi/MagicMirror/modules/MMM-AssistantMk2/node_modules/@bugsounet/snowboy
gyp ERR! node -v v10.20.1
gyp ERR! node-gyp -v v6.1.0
gyp ERR! not ok 

Failed with exit code: 1

Error: make: Entering directory '/home/pi/MagicMirror/modules/MMM-AssistantMk2/node_modules/@bugsounet/snowboy/build'
  CXX(target) Release/obj.target/snowboy/lib/snowboy.o
In file included from /home/pi/.electron-gyp/6.1.7/include/node/v8-internal.h:14,
                 from /home/pi/.electron-gyp/6.1.7/include/node/v8.h:25,
                 from /home/pi/.electron-gyp/6.1.7/include/node/node.h:63,
                 from ../../../nan/nan.h:56,
                 from ../lib/snowboy.cc:1:
/home/pi/.electron-gyp/6.1.7/include/node/v8config.h:326:49: warning: ‘MicrotasksCompletedCallback’ is deprecated [-Wdeprecated-declarations]
   declarator __attribute__((deprecated(message)))
                                                 ^
/home/pi/.electron-gyp/6.1.7/include/node/v8.h:8205:3: note: in expansion of macro ‘V8_DEPRECATE_SOON’
   V8_DEPRECATE_SOON("Use *WithData version.",
   ^~~~~~~~~~~~~~~~~
/home/pi/.electron-gyp/6.1.7/include/node/v8config.h:326:49: warning: ‘MicrotasksCompletedCallback’ is deprecated [-Wdeprecated-declarations]
   declarator __attribute__((deprecated(message)))
                                                 ^
/home/pi/.electron-gyp/6.1.7/include/node/v8.h:8214:3: note: in expansion of macro ‘V8_DEPRECATE_SOON’
   V8_DEPRECATE_SOON("Use *WithData version.",
   ^~~~~~~~~~~~~~~~~
In file included from ../lib/snowboy.cc:1:
../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’:
../../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
     , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete)
                                                              ^
../lib/snowboy.cc: In constructor ‘SnowboyDetect::SnowboyDetect(const string&, const string&)’:
../lib/snowboy.cc:38:31: warning: catching polymorphic type ‘class std::runtime_error’ by value [-Wcatch-value=]
   } catch (std::runtime_error e) {
                               ^
In file included from ../../../nan/nan.h:56,
                 from ../lib/snowboy.cc:1:
../lib/snowboy.cc: At global scope:
/home/pi/.electron-gyp/6.1.7/include/node/node.h:572:43: warning: cast between incompatible function types from ‘void (*)(Nan::ADDON_REGISTER_FUNCTION_ARGS_TYPE)’ {aka ‘void (*)(v8::Local<v8::Object>)’} to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type]
       (node::addon_register_func) (regfunc),                          \
                                           ^
/home/pi/.electron-gyp/6.1.7/include/node/node.h:606:3: note: in expansion of macro ‘NODE_MODULE_X’
   NODE_MODULE_X(modname, regfunc, NULL, 0)  // NOLINT (readability/null_usage)
   ^~~~~~~~~~~~~
../lib/snowboy.cc:183:1: note: in expansion of macro ‘NODE_MODULE’
 NODE_MODULE(SnowboyDetect, SnowboyDetect::Init)
 ^~~~~~~~~~~
In file included from /home/pi/.electron-gyp/6.1.7/include/node/node.h:63,
                 from ../../../nan/nan.h:56,
                 from ../lib/snowboy.cc:1:
/home/pi/.electron-gyp/6.1.7/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = node::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)]’:
/home/pi/.electron-gyp/6.1.7/include/node/node_object_wrap.h:84:78:   required from here
/home/pi/.electron-gyp/6.1.7/include/node/v8.h:9810:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<node::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type]
                reinterpret_cast<Callback>(callback), type);
                ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/pi/.electron-gyp/6.1.7/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = Nan::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)]’:
../../../nan/nan_object_wrap.h:65:61:   required from here
/home/pi/.electron-gyp/6.1.7/include/node/v8.h:9810:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<Nan::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type]
  SOLINK_MODULE(target) Release/obj.target/snowboy.node
/usr/bin/ld: cannot find -lcblas
collect2: error: ld returned 1 exit status
make: *** [snowboy.target.mk:143: Release/obj.target/snowboy.node] Error 1
make: Leaving directory '/home/pi/MagicMirror/modules/MMM-AssistantMk2/node_modules/@bugsounet/snowboy/build'
gyp ERR! build error 
gyp ERR! stack Error: `make` failed with exit code: 2
gyp ERR! stack     at ChildProcess.onExit (/home/pi/MagicMirror/modules/MMM-AssistantMk2/node_modules/node-gyp/lib/build.js:194:23)
gyp ERR! stack     at ChildProcess.emit (events.js:198:13)
gyp ERR! stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:248:12)
gyp ERR! System Linux 5.4.35-v7l+
gyp ERR! command "/usr/bin/node" "/home/pi/MagicMirror/modules/MMM-AssistantMk2/node_modules/.bin/node-gyp" "rebuild" "--target=6.1.7" "--arch=arm" "--dist-url=https://www.electronjs.org/headers" "--build-from-source" "--module_name=snowboy" "--module_path=/home/pi/MagicMirror/modules/MMM-AssistantMk2/node_modules/@bugsounet/snowboy/lib/node/binding/Release/electron-v6.1-linux-arm" "--remote_path=./snowboy/v1.4.7/Release/" "--package_name=snowboy-v1.4.7-electron-v6.1-linux-arm.tar.gz" "--host=https://github.com/bugsounet/snowboy"
gyp ERR! cwd /home/pi/MagicMirror/modules/MMM-AssistantMk2/node_modules/@bugsounet/snowboy
gyp ERR! node -v v10.20.1
gyp ERR! node-gyp -v v6.1.0
gyp ERR! not ok 

Failed with exit code: 1
    at SafeSubscriber._error (/home/pi/MagicMirror/modules/MMM-AssistantMk2/node_modules/spawn-rx/lib/src/index.js:267:84)
    at SafeSubscriber.__tryOrUnsub (/home/pi/MagicMirror/modules/MMM-AssistantMk2/node_modules/rxjs/internal/Subscriber.js:205:16)
    at SafeSubscriber.error (/home/pi/MagicMirror/modules/MMM-AssistantMk2/node_modules/rxjs/internal/Subscriber.js:156:26)
    at Subscriber._error (/home/pi/MagicMirror/modules/MMM-AssistantMk2/node_modules/rxjs/internal/Subscriber.js:92:26)
    at Subscriber.error (/home/pi/MagicMirror/modules/MMM-AssistantMk2/node_modules/rxjs/internal/Subscriber.js:72:18)
    at MapSubscriber.Subscriber._error (/home/pi/MagicMirror/modules/MMM-AssistantMk2/node_modules/rxjs/internal/Subscriber.js:92:26)
    at MapSubscriber.Subscriber.error (/home/pi/MagicMirror/modules/MMM-AssistantMk2/node_modules/rxjs/internal/Subscriber.js:72:18)
    at SafeSubscriber._next (/home/pi/MagicMirror/modules/MMM-AssistantMk2/node_modules/spawn-rx/lib/src/index.js:242:65)
    at SafeSubscriber.__tryOrUnsub (/home/pi/MagicMirror/modules/MMM-AssistantMk2/node_modules/rxjs/internal/Subscriber.js:205:16)
    at SafeSubscriber.next (/home/pi/MagicMirror/modules/MMM-AssistantMk2/node_modules/rxjs/internal/Subscriber.js:143:22)

> @bugsounet/snowboy@1.4.7 postinstall /home/pi/MagicMirror/modules/MMM-AssistantMk2/node_modules/@bugsounet/snowboy
> tsc -p tsconfig.json

+ @bugsounet/snowboy@1.4.7
added 20 packages from 25 contributors and audited 315 packages in 38.481s

3 packages are looking for funding
  run `npm fund` for details

found 6 low severity vulnerabilities
  run `npm audit fix` to fix them, or `npm audit` for details
@bugsounet/snowboy library installed

A Former User

@jimmydew said in MMM-AssistantMk2 (v3):

Linux 5.4.35-v7l+

ah …

and what version of gcc do you use ?

try gcc --version in console

jimmydew

@Bugsounet

pi@raspberrypi:~/MagicMirror $ gcc --version
gcc (Raspbian 7.3.0-19) 7.3.0
Copyright (C) 2017 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

electros

@Bugsounet Hi, again. I managed to make my radio station list and everything works fine, just I don’t know how to stop the radio. Can you please explain me how to add a stop radio command?
Thank you

A Former User

@jimmydew can you do this command for more informations, please ?

cat /etc/*release

@electros :
Good job !

For stop radio (and other A2D module), i create a feature in AMk2 (A2D Server part)
You can define your prefered stop command
by default it’s stop but … it’s depend of your language !
for exemple in french language, when i say stop, google transcript stoppe

you have an exemple in AMk2 structure sample

electros

@Bugsounet OK I understand that but if I configure that “stop” in english for example just I must say " jarvis stop" or “jarvis stop radio” ?

A Former User

It’s depend what’s google return in transcription
for verify what it return
You have 2 solutions:

turn Fullscreen ui , activate jarvis and say stop.
AMk2 will display in real time what it understand, so if it display stop, it’s ok
en french it display stoppe then i have to modify A2DStopCommand: "stoppe",
in console and debug mode actived
activate jarvis and say stop.
you will see the transcription of google
transcription: { transcription: 'stoppe', done: true },

notes:

if you say stop and method 1 or 2 result is stop too
no A2DStopCommand configuration require
stop command defined in A2DStopCommand stops all process of A2D : weblinks, cast, youtube, radio, photos (and MMM-FreeboxTV for french user)

Use:

just say jarvis (for activating) … stop (or your prefered A2DStopCommand)

electros

@Bugsounet OK, thank you

jimmydew

@Bugsounet

sure:

pi@raspberrypi:~/MagicMirror $ cat /etc/*release
PRETTY_NAME="Raspbian GNU/Linux 10 (buster)"
NAME="Raspbian GNU/Linux"
VERSION_ID="10"
VERSION="10 (buster)"
VERSION_CODENAME=buster
ID=raspbian
ID_LIKE=debian
HOME_URL="http://www.raspbian.org/"
SUPPORT_URL="http://www.raspbian.org/RaspbianForums"
BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"

A Former User

gyp ERR! System Linux 5.4.35-v7l+

in the raspbian web site i see this:

Raspbian Buster with desktop
Image with desktop based on Debian Buster
Version:February 2020
Release date:2020-02-13
Kernel version:4.19

i don’t know why you are the 5.4.x kernel version and it seams the problem
I don’t try to compile it with it so … sorry, i can’t help
retry with 4.19.x kernel version

jimmydew

@Bugsounet

hmm okay, is there a way to change my kernel version??

sdetweil

@jimmydew load a different version of the OS

jimmydew

@sdetweil
oke thank you but I dont now how I load a diffrent Os