Read the statement by Michael Teeuw here.
MMM-awesome-alexa
-
@uok825 ok, then
change the port value in config.js to 8090
-
@sdetweil Problem fixed, now try alexa
-
@uok825 do you have a web server running on that system?
-
@sdetweil No i don’t have, i install fresh raspian
-
@uok825 show results of ps -ef
without MM running
-
@sdetweil said in MMM-awesome-alexa:
@uok825 show results of ps -ef
without MM running
root 19 2 0 Haz26 ? 00:00:00 [kworker/u3:0-hci0] root 20 2 0 Haz26 ? 00:00:00 [xprtiod] root 23 2 0 Haz26 ? 00:01:40 [kswapd0] root 24 2 0 Haz26 ? 00:00:00 [nfsiod] root 35 2 0 Haz26 ? 00:00:00 [kthrotld] root 36 2 0 Haz26 ? 00:00:00 [iscsi_eh] root 37 2 0 Haz26 ? 00:00:00 [dwc_otg] root 38 2 0 Haz26 ? 00:00:00 [DWC Notificatio] root 39 2 0 Haz26 ? 00:00:00 [vchiq-slot/0] root 40 2 0 Haz26 ? 00:00:00 [vchiq-recy/0] root 41 2 0 Haz26 ? 00:00:00 [vchiq-sync/0] root 42 2 0 Haz26 ? 00:00:00 [vchiq-keep/0] root 43 2 0 Haz26 ? 00:00:00 [SMIO] root 44 2 0 Haz26 ? 00:00:48 [irq/86-mmc1] root 47 2 0 Haz26 ? 00:00:00 [mmc_complete] root 50 2 0 Haz26 ? 00:00:02 [jbd2/mmcblk0p2-] root 51 2 0 Haz26 ? 00:00:00 [ext4-rsv-conver] root 52 2 0 Haz26 ? 00:00:00 [ipv6_addrconf] root 86 1 0 Haz26 ? 00:00:02 /lib/systemd/systemd-journald root 108 1 0 Haz26 ? 00:00:01 /lib/systemd/systemd-udevd root 122 2 0 Haz26 ? 00:00:00 [SMIO] root 128 2 0 Haz26 ? 00:00:00 [mmal-vchiq] root 129 2 0 Haz26 ? 00:00:00 [mmal-vchiq] root 132 2 0 Haz26 ? 00:00:00 [mmal-vchiq] root 159 2 0 Haz26 ? 00:00:00 [cfg80211] root 162 2 0 Haz26 ? 00:00:00 [brcmf_wq/mmc1:0] root 163 2 0 Haz26 ? 00:00:11 [brcmf_wdog/mmc1] systemd+ 217 1 0 Haz26 ? 00:00:01 /lib/systemd/systemd-timesyncd root 246 1 0 Haz26 ? 00:00:00 /usr/sbin/alsactl -E HOME=/run/alsa -s -n 19 -c rdaemon root 247 1 0 Haz26 ? 00:00:00 /usr/sbin/cron -f nobody 248 1 0 Haz26 ? 00:00:00 /usr/sbin/thd --triggers /etc/triggerhappy/triggers.d/ --socket /run/thd.socket --user nobody --deviceglob /dev/input/event* root 250 1 0 Haz26 ? 00:00:01 /usr/lib/udisks2/udisksd avahi 252 1 0 Haz26 ? 00:00:01 avahi-daemon: running [raspberrypi.local] root 253 1 0 Haz26 ? 00:00:20 /usr/sbin/rngd -r /dev/hwrng root 261 1 0 Haz26 ? 00:00:00 /lib/systemd/systemd-logind avahi 266 252 0 Haz26 ? 00:00:00 avahi-daemon: chroot helper root 271 1 0 Haz26 ? 00:00:00 /usr/sbin/rsyslogd -n -iNONE message+ 277 1 0 Haz26 ? 00:00:02 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation --syslog-only root 310 1 0 Haz26 ? 00:00:00 /sbin/wpa_supplicant -u -s -O /run/wpa_supplicant root 330 1 0 Haz26 ? 00:00:00 /sbin/dhcpcd -q -b root 343 1 0 Haz26 ? 00:00:01 /usr/lib/policykit-1/polkitd --no-debug root 353 1 0 Haz26 ? 00:00:00 /usr/bin/vncserver-x11-serviced -fg root 354 353 5 Haz26 ? 00:13:58 /usr/bin/vncserver-x11-core -service root 368 1 0 Haz26 ? 00:00:00 /usr/bin/hciattach /dev/serial1 bcm43xx 3000000 flow - b8:27:eb:68:21:40 root 369 2 0 Haz26 ? 00:00:00 [kworker/u3:2-hci0] root 372 1 0 Haz26 ? 00:00:04 wpa_supplicant -B -c/etc/wpa_supplicant/wpa_supplicant.conf -iwlan0 -Dnl80211,wext root 374 1 0 Haz26 ? 00:00:00 /usr/sbin/sshd -D root 378 1 0 Haz26 ? 00:00:00 /usr/sbin/lightdm root 398 1 0 Haz26 ? 00:00:00 /usr/lib/bluetooth/bluetoothd root 404 1 0 Haz26 ? 00:00:00 /usr/bin/bluealsa root 414 2 0 Haz26 ? 00:00:00 [krfcommd] root 421 378 2 Haz26 tty7 00:06:23 /usr/lib/xorg/Xorg -s 0 -dpms :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch root 422 1 0 Haz26 tty1 00:00:00 /bin/login -f root 424 1 0 Haz26 ? 00:02:01 /usr/bin/vncagent service 14 root 480 378 0 Haz26 ? 00:00:00 lightdm --session-child 14 17 pi 492 1 0 Haz26 ? 00:00:00 /lib/systemd/systemd --user pi 495 492 0 Haz26 ? 00:00:00 (sd-pam) pi 506 480 0 Haz26 ? 00:00:03 /usr/bin/lxsession -s LXDE-pi -e LXDE pi 518 422 0 Haz26 tty1 00:00:00 -bash pi 519 492 0 Haz26 ? 00:00:01 /usr/bin/dbus-daemon --session --address=systemd: --nofork --nopidfile --systemd-activation --syslog-only pi 557 506 0 Haz26 ? 00:00:00 /usr/bin/ssh-agent x-session-manager pi 568 492 0 Haz26 ? 00:00:00 /usr/lib/gvfs/gvfsd pi 573 492 0 Haz26 ? 00:00:00 /usr/lib/gvfs/gvfsd-fuse /run/user/1000/gvfs -f -o big_writes pi 575 1 0 Haz26 ? 00:00:33 PM2 v4.4.0: God Daemon (/home/pi/.pm2) pi 580 1 0 Haz26 ? 00:00:02 /usr/bin/vncserverui service 15 pi 606 506 0 Haz26 ? 00:00:06 openbox --config-file /home/pi/.config/openbox/lxde-pi-rc.xml pi 607 506 0 Haz26 ? 00:00:00 lxpolkit pi 608 506 0 Haz26 ? 00:01:03 lxpanel --profile LXDE-pi pi 610 506 0 Haz26 ? 00:00:13 pcmanfm --desktop --profile LXDE-pi pi 619 580 0 Haz26 ? 00:00:00 /usr/bin/vncserverui -statusicon 5 pi 621 1 0 Haz26 ? 00:00:00 /usr/bin/ssh-agent -s pi 692 1 0 Haz26 ? 00:00:00 /usr/lib/menu-cache/menu-cached /run/user/1000/menu-cached-:0 pi 696 492 0 Haz26 ? 00:00:00 /usr/lib/gvfs/gvfs-udisks2-volume-monitor pi 703 492 0 Haz26 ? 00:00:00 /usr/lib/gvfs/gvfs-goa-volume-monitor pi 707 492 0 Haz26 ? 00:00:00 /usr/lib/gvfs/gvfs-afc-volume-monitor pi 712 492 0 Haz26 ? 00:00:00 /usr/lib/gvfs/gvfs-gphoto2-volume-monitor pi 716 492 0 Haz26 ? 00:00:00 /usr/lib/gvfs/gvfs-mtp-volume-monitor pi 817 568 0 Haz26 ? 00:00:00 /usr/lib/gvfs/gvfsd-trash --spawner :1.4 /org/gtk/gvfs/exec_spaw/0 root 1191 374 0 Haz26 ? 00:00:00 sshd: pi [priv] pi 1201 1191 0 Haz26 ? 00:00:01 sshd: pi@notty pi 1203 1201 0 Haz26 ? 00:00:00 /usr/lib/openssh/sftp-server root 1205 374 0 Haz26 ? 00:00:00 sshd: pi [priv] pi 1215 1205 0 Haz26 ? 00:00:00 sshd: pi@notty pi 1217 1215 0 Haz26 ? 00:00:00 -bash pi 1307 1 0 Haz26 ? 00:00:00 /bin/bash ./run-start.sh pi 1308 1307 1 Haz26 ? 00:04:24 node serveronly pi 1319 1 0 Haz26 ? 00:00:00 tee pi 2011 608 0 Haz26 ? 00:02:05 lxterminal pi 2028 2011 0 Haz26 pts/0 00:00:01 bash root 2317 374 0 Haz26 ? 00:00:00 sshd: pi [priv] pi 2560 2317 0 Haz26 ? 00:00:00 sshd: pi@notty pi 2562 2560 0 Haz26 ? 00:00:00 /usr/lib/openssh/sftp-server root 18999 2 0 01:17 ? 00:00:07 [kworker/u2:0-cfg80211] root 19458 2 0 01:35 ? 00:00:07 [kworker/u2:1-events_unbound] root 20569 2 0 01:49 ? 00:00:14 [kworker/0:2H-mmc_complete] root 21338 2 0 01:57 ? 00:00:00 [kworker/0:2-memcg_kmem_cache] root 21633 2 0 02:02 ? 00:00:00 [kworker/0:1-events] root 21649 2 0 02:05 ? 00:00:05 [kworker/0:1H-events_highpri] root 22089 2 0 02:08 ? 00:00:00 [kworker/0:0-events] root 22217 2 2 02:10 ? 00:00:06 [kworker/0:0H-mmc_complete] root 22495 2 0 02:12 ? 00:00:00 [kworker/0:3-events] root 22526 2 0 02:14 ? 00:00:00 [kworker/u2:2-events_unbound] pi 22533 2028 0 02:15 pts/0 00:00:00 ps -ef -
@uok825 said in MMM-awesome-alexa:
pi 1217 1215 0 Haz26 ? 00:00:00 -bash
pi 1307 1 0 Haz26 ? 00:00:00 /bin/bash ./run-start.sh
pi 1308 1307 1 Haz26 ? 00:04:24 node serveronlysomebody has the server running
if u are using my install script, it starts serveronly and then connects chromium over that
as there is no electron browser for pi0. (but only on pi 0/armv6l devices)show package.json
“start” line -
@sdetweil I used yourse
-
@uok825 yep, so server is running on port 8080…
sudo kill -9 1308
but pm2 stop
should have stopped that, does on my pi0 -
@sdetweil
What is that error? -
@uok825 no idea… not my module… his code is impossible to understand, typescript compiled to js, then minified…
-
@sdetweil I killed -9 1308, what is next? changing port to 8080 again?
-
@uok825 yeh i guess… then npm start to verify runs, then ctrl-c and make sure it stops (ps -ef | grep node
the pm2 start and pm2 stop -
@sdetweil sure, i doing. I need to fix this alexa problem
-
Anyone can help me please how do i get an authentication number for Alexa? I have tried to add
https://192.168.0.10:1234
https://192.168.0.10:3000/authresponse
https://magic-mirror-avs.github.io/Alexa-Web-Helper/authresponsenone of these pages are giving me code after when i click agree, to consent screen. i just end up with
Amazon Error page with no number on address bar.
We’re sorry!
An error occurred when we tried to process your request. Rest assured, we’re already working on the problem and expect to resolve it shortly. -
@nkchokshi which return url did I specify in Amazon, and u MUST use that one
u want one that will be on the local. machine. so, localhost:7777 might be good
-
I have the same problem with the token can someone help me.
Will the module be updated again? or is there a new module?
-
@Ghost2000 hasn’t been updated in 17 months, 3 years before that. so, not likely to get update.
they are very picky about what they allow for auth callback urls. http://localhost:someportnumber >1000
they will pop up a screen to request logon and authorize this app to access your account, u click approve, and then the page appears with the error at the top using your auth URL and the code.
I know this works, cause I do it in another application
-
This post is deleted! -
@sdetweil said in MMM-awesome-alexa:
http://localhost:someportnumber >1000
http://localhost:3000/ or http://localhost:3000/authresponse
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login