MMM-NewPIR v3

DeathForce · Aug 26, 2020, 1:55 PM

Hello, unfortunately I need some help.
I have installed the module but as soon as I edit the config magicmirror does not start anymore.

A Former User · Aug 26, 2020, 3:03 PM

what’s your config ?

DeathForce · Aug 26, 2020, 4:39 PM

@Bugsounet

/* Magic Mirror Config Sample
 *
 * By Michael Teeuw https://michaelteeuw.nl
 * MIT Licensed.
 *
 * For more information on how you can configure this file
 * See https://github.com/MichMich/MagicMirror#configuration
 *
 */

var config = {
	address: "localhost", 	// Address to listen on, can be:
							// - "localhost", "127.0.0.1", "::1" to listen on loopback interface
							// - another specific IPv4/6 to listen on a specific interface
							// - "0.0.0.0", "::" to listen on any interface
							// Default, when address config is left out or empty, is "localhost"
	port: 8080,
	basePath: "/", 	// The URL path where MagicMirror is hosted. If you are using a Reverse proxy
					// you must set the sub path here. basePath must end with a /
	ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], 	// Set [] to allow all IP addresses
															// or add a specific IPv4 of 192.168.1.5 :
															// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
															// or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
															// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	useHttps: false, 		// Support HTTPS or not, default "false" will use HTTP
	httpsPrivateKey: "", 	// HTTPS private key path, only require when useHttps is true
	httpsCertificate: "", 	// HTTPS Certificate path, only require when useHttps is true

	language: "de",
	logLevel: ["INFO", "LOG", "WARN", "ERROR"],
	timeFormat: 24,
	units: "metric",
	// serverOnly:  true/false/"local" ,
	// local for armv6l processors, default
	//   starts serveronly and then starts chrome browser
	// false, default for all NON-armv6l devices
	// true, force serveronly mode, because you want to.. no UI on this device

		modules: [

{
            module: 'MMM-Carousel',
            config: {
                transitionInterval: 10000,
                ignoreModules: ['clock', 'alert', 'calendar', 'MMM-Fuel', 'MMM-Sonos', 'MMM-OpenmapWeather', 'weatherforecast', 'MMM-DWD-Pollen', 'MMM-DWD-WarnWeather', 'newsfeed'],
                mode: 'positional',
                top_left: {enabled: true, ignoreModules: ['clock', 'MMM-Fuel', 'calendar']},
				top_right: {enabled: false, ignoreModules: ['MMM-OpenmapWeather', 'MMM-DWD-WarnWeather', 'weatherforecast', ], overrideTransitionInterval: 20000}
            }
        },
		{
			module: "alert",
		},
		{
			module: "updatenotification",
			position: "top_bar"
		},
		{
			module: "clock",
			position: "top_left",
			config: {
				showSunTimes: "true",
				lat: "52.4262603",
				lon: "9.4697593",
			// See 'Configuration options' for more information.
		}
		},
		{
  module: 'MMM-NewPIR',
  position: 'top_left',
  config: {
      debug: false,
      screen: {
        delay: 2 * 60 * 1000,
        turnOffDisplay: true,
        ecoMode: true,
        displayCounter: true,
        text: "Auto Turn Off Screen:",
        displayBar: true,
        displayStyle: "Text",
        governorSleeping: false,
        rpi4: false
      },
      pir: {
        usePir: true,
        gpio: 21,
        reverseValue: false
      },
      governor: {
        useGovernor: false,
        sleeping: "powersave",
        working: "ondemand"
      }
  }
},
		{
			module: "calendar",
			header: "Termine",
			position: "top_left",
			config: {
				maximumEntries: "12",
				calendars: [
					{
						symbol: "calendar-check",
						url: "https://calendar.google.com/calendar/ical/pubtgv6fpslkvd2s4tmd8b4164%40group.calendar.google.com/private-6290764b7af7d5aa6ea139fb4826c33c/basic.ics"					}
				]
			}
		},
		{
    		module: "MMM-Fuel",
		position: "top_left",
    		config: {
        	api_key: "654340ee-5805-e1c4-279f-13e7afbc6683",
        	lat: 52.4262603,
        	lng: 9.4697593,
		radius: 5,
		max: 5,
        	types: ["e5"],
		sortBy: "e5",
		rotate: "false",
        				// all your config options, which are different than their default values
    		}
		},
			{
			module: "compliments",
			position: "top_center",
				config: {
					compliments: {
					morning: [
			"Guten Morgen Sonnenschein!",
			"Hab einen schönen Tag!",
			"Hast du gut geschlafen?"
		],
		afternoon: [
			"Wie war dein Tag?",
			"Du siehst gut aus heute!",
			"Schön, dass du wieder da bist!"
		],
		evening: [
			"Einen schönen Abend!",
			"Schlaf gut!",
		],
		day_sunny: [
			"Heute ist ein Sonniger Tag",
			"Es ist ein schöner Tag!"
		],
		snow: [
			"Schnee!!!",
			"Schneeballschlacht!",
			"Lass uns einen Schneemann bauen!"
		],
		cloudy: [
			"Es ist wolkig, hoffentlich regnet es nicht"
		],
		showers: [
			"Es schüttet draußen, bleibt lieber Zuhause!"
		],
		cloudy_windy: [
			"Windig draußen!",
			"Halt bloß deine Hose fest"
		],
		thunderstorm: [
			"GEWITTER??? WOOOOO? ÜBERALL?!",
			"Es gewittert draußen!"
		],
		fog: [
			"Nebel des Todes of Doom!",
			"Ganz schön nebelig draußen..."
		],
		rain: [
			"Nicht den Regenschirm vergessen!",
			"Ihh es regnet :("
		]
	}
}
		},
{
            module: 'MMM-Sonos',
            header: 'Now playing',
            position: 'bottom_center',
            config: {
                animationSpeed: "1000",
                showFullGroupName: "true",
                showArtist: "true",
                showAlbum: "true",
                showMetadata: "true"
            }
        },
{
    module: 'MMM-COVID19-SPARKLINE',
	header: "COVID-19 Fälle",
      position: "bottom_center",
      config : {
        worldStats: true,
        sparklines: true,
        sparklineWidth: 100,
        sparklineHeight: 55,
        sparklineDays: 50,
        sparklineDeltavsDaily: false, 
        sortby: "confirmed",
        columns: ["confirmed", "deaths", "recovered"],
        countries: ["Germany", "Spain", "Italy", "US"],
        updateInterval: 1000 * 60 * 60 * 3,  //3 hours
        infoRowClass: "small",
        headerRowClass: "small",
        fadeSpeed: 1000,
        showDelta: true,
        showDeltaPlotNDays: 14,
        showDelimiter: true
      }
    },
	{
			module: "MMM-OpenmapWeather",
			header: "Wetter für",
			position: "top_right",
			config: {
				units: "metric",
				degreeLabel: "true",
				showFeelsLike: "false",
				showHumidity: "true",
				useKMPHwind: "true",
				useBeaufort: "false",
				colorIcon: "true",
				lang: "de",
				location: "Wunstorf",
				locationID: "2805761", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
				appid: "60328ec38ba3b4f61059f193dff92f13"
			}
		},
{
	module: 'MMM-DWD-WarnWeather',
	position: 'top_right',
//	header: 'Wetterwarnungen',
	config: {
		warnCellID: "803241021",
		changeColor: true,
		minutes: false,
		displayRegionName: true,
		displayInnerHeader: true,
		interval: 10 * 60 * 1000, // every 10 minutes
		loadingText: 'Warnungen werden geladen...',
		noWarningText: 'Keine Warnungen',
		severityThreshold: 1
	}
},
		{
			module: "weatherforecast",
			position: "top_right",
			header: "Wettervorhersage für",
			config: {
				units: "metric",
				showRainAmount: "true",
				lang: "de",
				scale: "true",
				colored: "true",
				location: "Wunstorf",
				locationID: "2805761", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
				appid: "60328ec38ba3b4f61059f193dff92f13",
				maxNumberOfDays: "7"
			}
		},
{
			module: "MMM-DWD-Pollen",
    			position: "top_right",
    			header: "Pollenwarnung",
    				config: {
        			updateInterval: 1 * 60 * 60 * 1000, // every 1 hour1
        			DWD_region: 32, // Östliches Niedersachsen
				icon: false // Show icons or not
}   		
 },
{
	module: "MMM-RAIN-MAP",
	position: "top_right",
	header: "Regenradar",
	config: {
		animationSpeed: 600,
		displayClockSymbol: true,
		displayTime: true,
		extraDelayLastFrame: 500,
		height: "300px",
		lat: 52.42580,
		lng: 9.42944,
		map: "OSM",
		markers: [
		    { lat: 52.42755, lng: 9.47309, color: "blue" }
		],
		onlyOnRain: false,
		opacity: 0.65,
		timeFormat: 24,
		updateIntervalInSeconds: 300,
		width: "300px",
		zoom: 8,
		zoomOutEach: 3,
		zoomOutLevel: 3,
	}
},
		{
			module: "newsfeed",
			position: "bottom_bar",
			config: {
				feeds: [
					{
						title: "Tagesschau",
						url: "http://www.tagesschau.de/xml/rss2"
					},
					{
						title: "Heise",
						url: "https://www.heise.de/rss/heise-atom.xml"
					},
				],
				showSourceTitle: true,
				showPublishDate: true,
				broadcastNewsFeeds: true,
				broadcastNewsUpdates: true
			}
		},
{
            module: "MMM-SpaceX",
            position: "top_left",
            config: {
                records: 3,
                modus: "upcoming",
                showExtraInfo: false,
		showColumnHeader: true,
	    }
	},
 {
    module: 'MMM-WiFiPassword',
    position: "top_left",
      config: {
        //See 'Configuration options' for more information.
        network: "FRITZ!Box 7590 M&K", 
        password: "***",
		showPassword: true,
      }
  },
	]
};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}

A Former User · Aug 26, 2020, 4:44 PM

configuration seems good

do you have any error on start ?

If you use pm2 -> stop the process and start it manually with npm start command

give me log or error ?

DeathForce · Aug 26, 2020, 4:50 PM

@Bugsounet

A Former User · Aug 26, 2020, 4:52 PM

some library missing … do you use npm install command for installing ?

DeathForce · Aug 26, 2020, 4:55 PM

@Bugsounet

Yes I have stopped MagicMirror and installed the module.

pi@PiSmartMirror:~/MagicMirror/modules/MMM-NewPIR $ npm install

> MMM-NewPIR@3.0.1 install /home/pi/MagicMirror/modules/MMM-NewPIR
> scripts/installer.sh

npm notice created a lockfile as package-lock.json. You should commit this file.
audited 176 packages in 5.506s

4 packages are looking for funding
  run `npm fund` for details

found 0 vulnerabilities

A Former User · Aug 26, 2020, 4:58 PM

can you try this:

bugs@debian:~/MagicMirror/modules/MMM-NewPIR$ rm -rf node_modules/
bugs@debian:~/MagicMirror/modules/MMM-NewPIR$ rm package-lock.json 
bugs@debian:~/MagicMirror/modules/MMM-NewPIR$ npm install
npm WARN deprecated request@2.88.2: request has been deprecated, see https://github.com/request/request/issues/3142
npm WARN deprecated har-validator@5.1.5: this library is no longer supported

 epoll@4.0.0 install /home/bugs/MagicMirror/modules/MMM-NewPIR/node_modules/epoll
 node-gyp rebuild

make : on entre dans le répertoire « /home/bugs/MagicMirror/modules/MMM-NewPIR/node_modules/epoll/build »
  CXX(target) Release/obj.target/epoll/src/epoll.o
  SOLINK_MODULE(target) Release/obj.target/epoll.node
  COPY Release/epoll.node
make : on quitte le répertoire « /home/bugs/MagicMirror/modules/MMM-NewPIR/node_modules/epoll/build »

 @bugsounet/pir@1.0.4 postinstall /home/bugs/MagicMirror/modules/MMM-NewPIR/node_modules/@bugsounet/pir
> electron-rebuild

✔ Rebuild Complete

 MMM-NewPIR@3.0.1 install /home/bugs/MagicMirror/modules/MMM-NewPIR
 scripts/installer.sh

npm notice created a lockfile as package-lock.json. You should commit this file.
added 176 packages from 127 contributors and audited 176 packages in 26.073s

4 packages are looking for funding
  run `npm fund` for details

found 0 vulnerabilities

bugs@debian:~/MagicMirror/modules/MMM-NewPIR$ cd ~/MagicMirror
bugs@debian:~/MagicMirror$ npm start

DeathForce · Aug 26, 2020, 5:02 PM

@Bugsounet

That’s it. Seems to work now… Thank You :)

A Former User · Aug 26, 2020, 5:09 PM

perfect so :)

when it want to works, it's magical