MMM-NewPIR v3

DeathForce · Aug 26, 2020, 4:39 PM

/* Magic Mirror Config Sample
 *
 * By Michael Teeuw https://michaelteeuw.nl
 * MIT Licensed.
 *
 * For more information on how you can configure this file
 * See https://github.com/MichMich/MagicMirror#configuration
 *
 */

var config = {
	address: "localhost", 	// Address to listen on, can be:
							// - "localhost", "127.0.0.1", "::1" to listen on loopback interface
							// - another specific IPv4/6 to listen on a specific interface
							// - "0.0.0.0", "::" to listen on any interface
							// Default, when address config is left out or empty, is "localhost"
	port: 8080,
	basePath: "/", 	// The URL path where MagicMirror is hosted. If you are using a Reverse proxy
					// you must set the sub path here. basePath must end with a /
	ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], 	// Set [] to allow all IP addresses
															// or add a specific IPv4 of 192.168.1.5 :
															// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
															// or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
															// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	useHttps: false, 		// Support HTTPS or not, default "false" will use HTTP
	httpsPrivateKey: "", 	// HTTPS private key path, only require when useHttps is true
	httpsCertificate: "", 	// HTTPS Certificate path, only require when useHttps is true

	language: "de",
	logLevel: ["INFO", "LOG", "WARN", "ERROR"],
	timeFormat: 24,
	units: "metric",
	// serverOnly:  true/false/"local" ,
	// local for armv6l processors, default
	//   starts serveronly and then starts chrome browser
	// false, default for all NON-armv6l devices
	// true, force serveronly mode, because you want to.. no UI on this device

		modules: [

{
            module: 'MMM-Carousel',
            config: {
                transitionInterval: 10000,
                ignoreModules: ['clock', 'alert', 'calendar', 'MMM-Fuel', 'MMM-Sonos', 'MMM-OpenmapWeather', 'weatherforecast', 'MMM-DWD-Pollen', 'MMM-DWD-WarnWeather', 'newsfeed'],
                mode: 'positional',
                top_left: {enabled: true, ignoreModules: ['clock', 'MMM-Fuel', 'calendar']},
				top_right: {enabled: false, ignoreModules: ['MMM-OpenmapWeather', 'MMM-DWD-WarnWeather', 'weatherforecast', ], overrideTransitionInterval: 20000}
            }
        },
		{
			module: "alert",
		},
		{
			module: "updatenotification",
			position: "top_bar"
		},
		{
			module: "clock",
			position: "top_left",
			config: {
				showSunTimes: "true",
				lat: "52.4262603",
				lon: "9.4697593",
			// See 'Configuration options' for more information.
		}
		},
		{
  module: 'MMM-NewPIR',
  position: 'top_left',
  config: {
      debug: false,
      screen: {
        delay: 2 * 60 * 1000,
        turnOffDisplay: true,
        ecoMode: true,
        displayCounter: true,
        text: "Auto Turn Off Screen:",
        displayBar: true,
        displayStyle: "Text",
        governorSleeping: false,
        rpi4: false
      },
      pir: {
        usePir: true,
        gpio: 21,
        reverseValue: false
      },
      governor: {
        useGovernor: false,
        sleeping: "powersave",
        working: "ondemand"
      }
  }
},
		{
			module: "calendar",
			header: "Termine",
			position: "top_left",
			config: {
				maximumEntries: "12",
				calendars: [
					{
						symbol: "calendar-check",
						url: "https://calendar.google.com/calendar/ical/pubtgv6fpslkvd2s4tmd8b4164%40group.calendar.google.com/private-6290764b7af7d5aa6ea139fb4826c33c/basic.ics"					}
				]
			}
		},
		{
    		module: "MMM-Fuel",
		position: "top_left",
    		config: {
        	api_key: "654340ee-5805-e1c4-279f-13e7afbc6683",
        	lat: 52.4262603,
        	lng: 9.4697593,
		radius: 5,
		max: 5,
        	types: ["e5"],
		sortBy: "e5",
		rotate: "false",
        				// all your config options, which are different than their default values
    		}
		},
			{
			module: "compliments",
			position: "top_center",
				config: {
					compliments: {
					morning: [
			"Guten Morgen Sonnenschein!",
			"Hab einen schönen Tag!",
			"Hast du gut geschlafen?"
		],
		afternoon: [
			"Wie war dein Tag?",
			"Du siehst gut aus heute!",
			"Schön, dass du wieder da bist!"
		],
		evening: [
			"Einen schönen Abend!",
			"Schlaf gut!",
		],
		day_sunny: [
			"Heute ist ein Sonniger Tag",
			"Es ist ein schöner Tag!"
		],
		snow: [
			"Schnee!!!",
			"Schneeballschlacht!",
			"Lass uns einen Schneemann bauen!"
		],
		cloudy: [
			"Es ist wolkig, hoffentlich regnet es nicht"
		],
		showers: [
			"Es schüttet draußen, bleibt lieber Zuhause!"
		],
		cloudy_windy: [
			"Windig draußen!",
			"Halt bloß deine Hose fest"
		],
		thunderstorm: [
			"GEWITTER??? WOOOOO? ÜBERALL?!",
			"Es gewittert draußen!"
		],
		fog: [
			"Nebel des Todes of Doom!",
			"Ganz schön nebelig draußen..."
		],
		rain: [
			"Nicht den Regenschirm vergessen!",
			"Ihh es regnet :("
		]
	}
}
		},
{
            module: 'MMM-Sonos',
            header: 'Now playing',
            position: 'bottom_center',
            config: {
                animationSpeed: "1000",
                showFullGroupName: "true",
                showArtist: "true",
                showAlbum: "true",
                showMetadata: "true"
            }
        },
{
    module: 'MMM-COVID19-SPARKLINE',
	header: "COVID-19 Fälle",
      position: "bottom_center",
      config : {
        worldStats: true,
        sparklines: true,
        sparklineWidth: 100,
        sparklineHeight: 55,
        sparklineDays: 50,
        sparklineDeltavsDaily: false, 
        sortby: "confirmed",
        columns: ["confirmed", "deaths", "recovered"],
        countries: ["Germany", "Spain", "Italy", "US"],
        updateInterval: 1000 * 60 * 60 * 3,  //3 hours
        infoRowClass: "small",
        headerRowClass: "small",
        fadeSpeed: 1000,
        showDelta: true,
        showDeltaPlotNDays: 14,
        showDelimiter: true
      }
    },
	{
			module: "MMM-OpenmapWeather",
			header: "Wetter für",
			position: "top_right",
			config: {
				units: "metric",
				degreeLabel: "true",
				showFeelsLike: "false",
				showHumidity: "true",
				useKMPHwind: "true",
				useBeaufort: "false",
				colorIcon: "true",
				lang: "de",
				location: "Wunstorf",
				locationID: "2805761", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
				appid: "60328ec38ba3b4f61059f193dff92f13"
			}
		},
{
	module: 'MMM-DWD-WarnWeather',
	position: 'top_right',
//	header: 'Wetterwarnungen',
	config: {
		warnCellID: "803241021",
		changeColor: true,
		minutes: false,
		displayRegionName: true,
		displayInnerHeader: true,
		interval: 10 * 60 * 1000, // every 10 minutes
		loadingText: 'Warnungen werden geladen...',
		noWarningText: 'Keine Warnungen',
		severityThreshold: 1
	}
},
		{
			module: "weatherforecast",
			position: "top_right",
			header: "Wettervorhersage für",
			config: {
				units: "metric",
				showRainAmount: "true",
				lang: "de",
				scale: "true",
				colored: "true",
				location: "Wunstorf",
				locationID: "2805761", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
				appid: "60328ec38ba3b4f61059f193dff92f13",
				maxNumberOfDays: "7"
			}
		},
{
			module: "MMM-DWD-Pollen",
    			position: "top_right",
    			header: "Pollenwarnung",
    				config: {
        			updateInterval: 1 * 60 * 60 * 1000, // every 1 hour1
        			DWD_region: 32, // Östliches Niedersachsen
				icon: false // Show icons or not
}   		
 },
{
	module: "MMM-RAIN-MAP",
	position: "top_right",
	header: "Regenradar",
	config: {
		animationSpeed: 600,
		displayClockSymbol: true,
		displayTime: true,
		extraDelayLastFrame: 500,
		height: "300px",
		lat: 52.42580,
		lng: 9.42944,
		map: "OSM",
		markers: [
		    { lat: 52.42755, lng: 9.47309, color: "blue" }
		],
		onlyOnRain: false,
		opacity: 0.65,
		timeFormat: 24,
		updateIntervalInSeconds: 300,
		width: "300px",
		zoom: 8,
		zoomOutEach: 3,
		zoomOutLevel: 3,
	}
},
		{
			module: "newsfeed",
			position: "bottom_bar",
			config: {
				feeds: [
					{
						title: "Tagesschau",
						url: "http://www.tagesschau.de/xml/rss2"
					},
					{
						title: "Heise",
						url: "https://www.heise.de/rss/heise-atom.xml"
					},
				],
				showSourceTitle: true,
				showPublishDate: true,
				broadcastNewsFeeds: true,
				broadcastNewsUpdates: true
			}
		},
{
            module: "MMM-SpaceX",
            position: "top_left",
            config: {
                records: 3,
                modus: "upcoming",
                showExtraInfo: false,
		showColumnHeader: true,
	    }
	},
 {
    module: 'MMM-WiFiPassword',
    position: "top_left",
      config: {
        //See 'Configuration options' for more information.
        network: "FRITZ!Box 7590 M&K", 
        password: "***",
		showPassword: true,
      }
  },
	]
};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}

A Former User · Aug 26, 2020, 4:44 PM

configuration seems good

do you have any error on start ?

If you use pm2 -> stop the process and start it manually with npm start command

give me log or error ?

DeathForce · Aug 26, 2020, 4:50 PM

@Bugsounet

A Former User · Aug 26, 2020, 4:52 PM

some library missing … do you use npm install command for installing ?

DeathForce · Aug 26, 2020, 4:55 PM

@Bugsounet

Yes I have stopped MagicMirror and installed the module.

pi@PiSmartMirror:~/MagicMirror/modules/MMM-NewPIR $ npm install

> MMM-NewPIR@3.0.1 install /home/pi/MagicMirror/modules/MMM-NewPIR
> scripts/installer.sh

npm notice created a lockfile as package-lock.json. You should commit this file.
audited 176 packages in 5.506s

4 packages are looking for funding
  run `npm fund` for details

found 0 vulnerabilities

A Former User · Aug 26, 2020, 4:58 PM

can you try this:

bugs@debian:~/MagicMirror/modules/MMM-NewPIR$ rm -rf node_modules/
bugs@debian:~/MagicMirror/modules/MMM-NewPIR$ rm package-lock.json 
bugs@debian:~/MagicMirror/modules/MMM-NewPIR$ npm install
npm WARN deprecated request@2.88.2: request has been deprecated, see https://github.com/request/request/issues/3142
npm WARN deprecated har-validator@5.1.5: this library is no longer supported

 epoll@4.0.0 install /home/bugs/MagicMirror/modules/MMM-NewPIR/node_modules/epoll
 node-gyp rebuild

make : on entre dans le répertoire « /home/bugs/MagicMirror/modules/MMM-NewPIR/node_modules/epoll/build »
  CXX(target) Release/obj.target/epoll/src/epoll.o
  SOLINK_MODULE(target) Release/obj.target/epoll.node
  COPY Release/epoll.node
make : on quitte le répertoire « /home/bugs/MagicMirror/modules/MMM-NewPIR/node_modules/epoll/build »

 @bugsounet/pir@1.0.4 postinstall /home/bugs/MagicMirror/modules/MMM-NewPIR/node_modules/@bugsounet/pir
> electron-rebuild

✔ Rebuild Complete

 MMM-NewPIR@3.0.1 install /home/bugs/MagicMirror/modules/MMM-NewPIR
 scripts/installer.sh

npm notice created a lockfile as package-lock.json. You should commit this file.
added 176 packages from 127 contributors and audited 176 packages in 26.073s

4 packages are looking for funding
  run `npm fund` for details

found 0 vulnerabilities

bugs@debian:~/MagicMirror/modules/MMM-NewPIR$ cd ~/MagicMirror
bugs@debian:~/MagicMirror$ npm start

DeathForce · Aug 26, 2020, 5:02 PM

@Bugsounet

That’s it. Seems to work now… Thank You :)

A Former User · Aug 26, 2020, 5:09 PM

perfect so :)

when it want to works, it's magical

bdream · Aug 27, 2020, 8:39 AM

Hi @Bugsounet just going to install your module with deep hope in it’s functionality.
I’m going to use it on an Pi0 and get (now two times) an Network error: Software caused connection aborton Putty while npm install

Here all I get in console:

pi@RasPiZeroW:~/MagicMirror/modules/MMM-NewPIR $ npm install
npm WARN deprecated request@2.88.2: request has been deprecated, see https://github.com/request/request/issues/3142
npm WARN deprecated har-validator@5.1.5: this library is no longer supported

> epoll@4.0.0 install /home/pi/MagicMirror/modules/MMM-NewPIR/node_modules/epoll
> node-gyp rebuild

make: Verzeichnis „/home/pi/MagicMirror/modules/MMM-NewPIR/node_modules/epoll/build“ wird betreten
  CXX(target) Release/obj.target/epoll/src/epoll.o

Any idea, or is it caused on the hardware of RPi0?

I tried to start again and deleted all MMM-NewPIR stuff and rebootet RPi.
New attempt git clone and npm install

Getting this in coonsole:

pi@RasPiZeroW:~/MagicMirror/modules/MMM-NewPIR $ npm install
npm WARN deprecated request@2.88.2: request has been deprecated, see https://github.com/request/request/issues/3142
npm WARN deprecated har-validator@5.1.5: this library is no longer supported

> epoll@4.0.0 install /home/pi/MagicMirror/modules/MMM-NewPIR/node_modules/epoll
> node-gyp rebuild

make: Verzeichnis „/home/pi/MagicMirror/modules/MMM-NewPIR/node_modules/epoll/build“ wird betreten
  CXX(target) Release/obj.target/epoll/src/epoll.o
  SOLINK_MODULE(target) Release/obj.target/epoll.node
  COPY Release/epoll.node
make: Verzeichnis „/home/pi/MagicMirror/modules/MMM-NewPIR/node_modules/epoll/build“ wird verlassen

> @bugsounet/pir@1.0.4 postinstall /home/pi/MagicMirror/modules/MMM-NewPIR/node_modules/@bugsounet/pir
> electron-rebuild

⠸ Building module: epoll, Completed: 0

and status ⠸ Building module: epoll, Completed: 0 is not changing colpetition even it run and run.

So I assume it’s really related to RPi0 installation and electron. But that is to deep for my small knowledge selfsolving if possible anyway.

Fozi · Aug 27, 2020, 6:51 AM

Thanks for this new PIR module! I replaced last night the MMM-PIR-sensor module with yours and it works perfectly, also with my microwave sensor.
Especially the behaviour after the first start is now as expected, as the display is switches off after the countdown, without initializing the sensor first. With MMM-PIR-sensor the display would have stayed on after the first start until the sensor catches once a motion and the start the coutdown. I tweaked the node_helper.js to correct that, but after each module update I had to reapply that tweek. That belongs now to the past. Great job!:clapping_hands_light_skin_tone:

I have a feature request:
I would like to have two configuration options available to adjust the colours of “displayStyle”, as currently it is hardcoded in green:

One option to adjust the colour of the remaining time (wich is currently green).
Another option to adjust the colour of the past time (currently dark grey or white).

something like this:

[...]
displayStyleRemaining: 'e2e2e2', //RGB value of the remaining time
displayStylePast: '454545', //RGB value of the past time
[...]

I’m using the “Bar” style on “bottom_bar” position, which shows a decent thin line over the hole width of the mirror, which slowly creeps down to the left. But it is hard to distinguish the remaining time (green) and the past time (white) of that bar. I would prefer to adjust the remaining time to white, and the past time to black, as an example.

What do you think?

Oh BTW: I might help other users, if you enhance a little bit the README on GitHub on how to make the display styles visible. It took me some trials until I found out to configure an empty string for the “text” option to make the other styles show up.