Are you tired of editing config.js, or have trouble doing it, see my new module

stoffel

@sdetweil
ok, what i see is when i start mm with npm start it loads all modules what i have installt not only from the config.js (i use now the default config.js from mm). Next i delete all moduls what i not needed.

sdetweil

@stoffel sorry, I do not understand

if there is a collector error, you should see something like

/home/sam/mmm-config/scripts/buildschema3.js:619
  return data[left];
             ^

TypeError: Cannot read property 'feeds' of undefined
    at get_define_info (/home/sam/mmm-config/scripts/buildschema3.js:619:14)
    at /home/sam/mmm-config/scripts/buildschema3.js:415:29
    at Array.forEach (<anonymous>)
    at Object.<anonymous> (/home/sam/mmm-config/scripts/buildschema3.js:405:24)

stoffel

ok, i think so,

0|MagicMirror  | stderr 2: /home/pi/MagicMirror/modules/MMM-Config/scripts/buildschema3.js:595
0|MagicMirror  |     let tt = data[left];
0|MagicMirror  |                  ^
0|MagicMirror  | TypeError: Cannot read property '' of undefined
0|MagicMirror  |     at get_define_info (/home/pi/MagicMirror/modules/MMM-Config/scripts/buildschema3.js:595:18)
0|MagicMirror  |     at get_define_info (/home/pi/MagicMirror/modules/MMM-Config/scripts/buildschema3.js:599:12)
0|MagicMirror  |     at get_define_info (/home/pi/MagicMirror/modules/MMM-Config/scripts/buildschema3.js:599:12)

look at page 2 the 2. post

sdetweil

@stoffel yes, that is because of the … the code splits the string with . and not I have 10 items, some empty… oops…

working on fix…

sdetweil

@stoffel I think I have a fix

see the issue for instructions

https://github.com/sdetweil/MMM-Config/issues/8

Fozi

@sdetweil The “Mother of all Modules”! :love-you_gesture_light_skin_tone:
That’s a fantastic job, Sam! Especially beginners will be grateful, but not only beginners.

Stoffbeuteluwe

Hi I only see this…?

Need a little bit help :grinning_face:

sdetweil

@stoffbeuteluwe try again , git pull the repo…

stoffel

@sdetweil

i have fix it with your issues. thank you very much !!

sdetweil

@stoffel i have seen a couple places in some data where I inadvertently change paths to files with leading …

so be careful…

will update fix when I have it…

stoffel

@sdetweil
ok, thanks. it works well with all my modules, great!

but when i add the MMM-Volume i have another error. i think it is a problem from MMM-Volume. it’s two years old. it’s a json format error

sdetweil

@stoffel no, I fixed a problem with MMM-Volume earlier today… haven’t pushed it yet…

stoffel

@sdetweil

ok

when you module works also with MMM-Volume then i am very happy.:beaming_face_with_smiling_eyes: i control my mm over remote control.

thank you very much for your support, great job :thumbs_up:

sdetweil

@stoffel do a git pull on the newform branch, and try it out… this is with the fix for MMM-Volume

and another, plus an npm install after

Assassins

Work 100% with rpi 3, Nice modul you made, Thanks alot

stoffel

@sdetweil

good morning

sometimes i can not post, when i submit i have a error message in the lower right corner ?!

ok, i’v tested your fix. at the moment your module do not work for. in mm says i use localhost, but in my config i have addressed at 0.0.0.0 and ipWhitelist: []

i send you the result of pm2 logs --lines=100. one for test without MMM-Volume and one with.
i hope it’s help you.

sdetweil

@stoffel yes, the forum is not very helpful on why a posting error… i get it too…
i refresh the screen and then I can post the exact same message… (I copy it before refresh)

MMM-Volume… i thought i pushed that one line change… just did… git pull

the localhost/0.0.0.0

will examine

sdetweil

@stoffel ok, fixes… in branch newform…

on the QR code messages I was changing address AND ipWhitelist EMPTY…
i only check address now, and assume you know what you are doing on whitelist

sdetweil

For any that want to look at the multi-module form layout and give feedback

checkout the multi-module branch

git checkout multi-module

there is a file that contains the list of module names that CAN be used multiple times in the same config.js

modules_list.txt

you cannot submit the form, only view it…

to go back to the operating version

git checkout main

or

(with the .... fixes) 
git checkout newform

stoffel

@sdetweil

i did it. WOW, all works well. thanks, great job and fast :thumbs_up:

but it works only when i open …/review or must add ‘?port=8300’ at …/config.html

thank you very much :-)