Are you tired of editing config.js, or have trouble doing it, see my new module

[stoffel]

ok, i think so,

0|MagicMirror  | stderr 2: /home/pi/MagicMirror/modules/MMM-Config/scripts/buildschema3.js:595
0|MagicMirror  |     let tt = data[left];
0|MagicMirror  |                  ^
0|MagicMirror  | TypeError: Cannot read property '' of undefined
0|MagicMirror  |     at get_define_info (/home/pi/MagicMirror/modules/MMM-Config/scripts/buildschema3.js:595:18)
0|MagicMirror  |     at get_define_info (/home/pi/MagicMirror/modules/MMM-Config/scripts/buildschema3.js:599:12)
0|MagicMirror  |     at get_define_info (/home/pi/MagicMirror/modules/MMM-Config/scripts/buildschema3.js:599:12)

look at page 2 the 2. post

[sdetweil]

@stoffel yes, that is because of the … the code splits the string with . and not I have 10 items, some empty… oops…

working on fix…

[sdetweil]

@stoffel I think I have a fix

see the issue for instructions

https://github.com/sdetweil/MMM-Config/issues/8

[Fozi]

@sdetweil The “Mother of all Modules”! :love-you_gesture_light_skin_tone:
That’s a fantastic job, Sam! Especially beginners will be grateful, but not only beginners.

[Stoffbeuteluwe]

Hi I only see this…?

Need a little bit help :grinning_face:

[sdetweil]

@stoffbeuteluwe try again , git pull the repo…

[stoffel]

@sdetweil

i have fix it with your issues. thank you very much !!

[sdetweil]

@stoffel i have seen a couple places in some data where I inadvertently change paths to files with leading …

so be careful…

will update fix when I have it…

[stoffel]

@sdetweil
ok, thanks. it works well with all my modules, great!

but when i add the MMM-Volume i have another error. i think it is a problem from MMM-Volume. it’s two years old. it’s a json format error

[sdetweil]

@stoffel no, I fixed a problem with MMM-Volume earlier today… haven’t pushed it yet…

[stoffel]

@sdetweil

ok

when you module works also with MMM-Volume then i am very happy.:beaming_face_with_smiling_eyes: i control my mm over remote control.

thank you very much for your support, great job :thumbs_up:

[sdetweil]

@stoffel do a git pull on the newform branch, and try it out… this is with the fix for MMM-Volume

and another, plus an npm install after

[Assassins]

Work 100% with rpi 3, Nice modul you made, Thanks alot

[stoffel]

@sdetweil

good morning

sometimes i can not post, when i submit i have a error message in the lower right corner ?!

ok, i’v tested your fix. at the moment your module do not work for. in mm says i use localhost, but in my config i have addressed at 0.0.0.0 and ipWhitelist: []

i send you the result of pm2 logs --lines=100. one for test without MMM-Volume and one with.
i hope it’s help you.

[sdetweil]

@stoffel yes, the forum is not very helpful on why a posting error… i get it too…
i refresh the screen and then I can post the exact same message… (I copy it before refresh)

MMM-Volume… i thought i pushed that one line change… just did… git pull

the localhost/0.0.0.0

will examine

[sdetweil]

@stoffel ok, fixes… in branch newform…

on the QR code messages I was changing address AND ipWhitelist EMPTY…
i only check address now, and assume you know what you are doing on whitelist

[sdetweil]

For any that want to look at the multi-module form layout and give feedback

checkout the multi-module branch

git checkout multi-module

there is a file that contains the list of module names that CAN be used multiple times in the same config.js

modules_list.txt

you cannot submit the form, only view it…

to go back to the operating version

git checkout main

or

(with the .... fixes) 
git checkout newform 

[stoffel]

@sdetweil

i did it. WOW, all works well. thanks, great job and fast :thumbs_up:

but it works only when i open …/review or must add ‘?port=8300’ at …/config.html

thank you very much :-)

[sdetweil]

@stoffel said in Are you tired of editing config.js, or have trouble doing it, see my new module:

but it works only when i open …/review or must add ‘?port=8300’ at …/config.html

well, i need a free port to have the two parts communicate.

I had ‘guessed’ at a free port, but some other users had stuff running there
so, I have it get a free port, but now I have to pass that to the form side…

use the review URL , it will always redirect to the correct url

it will probably never change on your system , so once u know what the number is, use that url…

[stoffel]

@sdetweil

ok, thanks for you support. great job !

i follow this tread and test your module. but in the next days i am a little bit busy.

so, @ all have a nice WE