MMM-MotionEye - surveillance video stream on your mirror!

darbos

@emos
I had that same issue. I ended up just creating a few mmm-mogioneye module entries in the config file

SdeGeata

Did you ever get an answer back on this one? I am having the same problem. I see everything fine without autohide active, but if I activate autohide, I see it for a bit during page load and never again after. I get detected motion emails and photo uploads so the detection isn’t the problem. It just doesn’t get fed to the mirror module somehow. Maybe my Web-hook config is off?

It would be helpful to know if you fixed your issue and how you did it.

Binog

Hey, SdeGeata
No, actually I didn’t

I circumvented it by setting up a motioneyeos raspberry pi zero. As I needed the larger image on my Magicmirror I used “fast…?” option, which does not provide any of the motion activities,. what was fine to me.
I do think, this is not merely a problem of motioneye, but of the MM its self.
With every update of MM the Gap went bigger, I got more problems.
Now, streaming the motioneyeos to two MMs it is more steady, nonetheless I do habe outages. I don’t see a picture,. although my browser directed to motioneyeos shows an actual one. Restarting MM solves that issue- normally,…
Good look to You !

SdeGeata

@Binog

Thanks for the info. I’ll keep trying stuff out and see what happens.

SdeGeata

@Cato
So how do we use that Webhook URL to trigger the hidden module. I have been screwing with it for days trying to get it to work. Can you clarify the config for that?

OberfragGER

@Cato
I really want to use the AutoHide feature. But the stream is fixed and always displayed. Is there any possibility…?

	{
		module: "MMM-MotionEye",
		position: "bottom_left",
		config: {
			url: "http://pihole:8081",
			autoHide: true,
			autoHideDelay: "10000",
			forcedRefreshInterval: 60000,
			width: "400px",
			debug: false
				}
	},

OberfragGER

@oberfragger
ok. solved.

Somehow it was working after an hour or so.

Also- you have to enable access to the mirror via
address: “0.0.0.0” and whitelist

The the commands http://mirror:8080/motioneye and http://mirror:8080/motioneye/hide are working.

piwy

Bonjour à tous, comme beaucoup apparement, j’ai installé le module motioneye sur mon MM avec ces lignes dans mon fichier “config”:

{
	module: 'MMM-MotionEye',
		position: 'bottom_left',
		config: {
		url: "http://monip:8081",
		forcedRefreshInterval: 60000,
		width: 400,
		debug: true
			}
		},

Mais quand je lance Magic Mirror , j’ai une petite icone avec une image cassée.
Lorsque je rentre cette adresse ip :“http://monip:8081”, dans mon navigateur sur mon pc , je tombe sur une page qui me dit : “ce site n’autorise pas la connexion”

J’ai essayé de voir si sur motioneye il n’y avait pas des autorisations de connexions a mettre mais je ne vois rien .

Infos peut etre importante, motioneye est installer sur docker à travers portainer sur une VM!

Merci pour votre aide

SdeGeata

@piwy Salut Piwy;

Essaye de changer des paramètres dans motion.conf & motioneye.conf. Il ne sont pas accessible de la GUI. Voir avec Terminal; /etc/motioneye/motion.conf et trouve webcontrol_localhost, si c’est “on” change ça pour “off”.

En /etc/motioneye/motioneye.conf Change motion_control_localhost true pour motion_control_localhost false .

Essaye ça.