Hello-Lucy Module Microphone not working

Mykle1

@Linas123

I don’t think it’s npm. Those are just warnings and won’t affect the module.

USB microphone will work but it does introduce some latency.

If you run arecord test.wav in a terminal window does it record a sound file?

So, based on the info you gave me your config entry for the microphone should be

microphone: "2,0",

Please try that

Then post your entire Hello-Lucy config entry so I can see it

Linas123

@Mykle1

{
disabled: false,
module: "Hello-Lucy",
position: "top_center",
config: {
    keyword: 'HELLO LUCY',              // keyword to activate listening for a command/sentence
    timeout: 15,                        // timeout listening for a command/sentence
    standByMethod: 'DPMS',              // 'DPMS' = anything else than RPi or 'PI'
    microphone: "2,0",                  // run "arecord -l" card # and device # mine is "0,0"
    sounds: ["1.mp3", "11.mp3"],        // welcome sound at startup. Add several for a random greetings
    confirmationSound: "ding.mp3",      // name and extension of sound file
    startHideAll: false,                 // All modules start as hidden EXCEPT PAGE ONE
    // *** Page One is your default startup page *** This overrides startHideAll: true,
    pageOneModules: ["Hello-Lucy", ],                     // default modules to show on page one/startup
    pageTwoModules: ["Hello-Lucy",], // modules to show on page two
    pageThreeModules: ["Hello-Lucy",],                 // modules to show on page three
    pageFourModules: ["Hello-Lucy", ],                  // modules to show on page four
    pageFiveModules: ["Hello-Lucy", ],               // modules to show on page five
    pageSixModules: ["Hello-Lucy", ],                      // modules to show on page six
    pageSevenModules: ["Hello-Lucy", ],                   // modules to show on page seven
    pageEightModules: ["Hello-Lucy", ],                   // modules to show on page eight
    pageNineModules: ["Hello-Lucy", ],                   // modules to show on page nine
    pageTenModules: ["Hello-Lucy", ]             // modules to show on page ten
    }
},

I don’t know what else I can do.

Mykle1

@Linas123

You tried to run it? What was the result?

If you run arecord test.wav in a terminal window does it record a sound file?

Mykle1

@Linas123

Your config entry is fine. I just tried it with my microphone setting and it works fine

Linas123

Yes I tried it to run, but lucy say only “Hello Michael, what would you like to see” and on the top of the Mirror is a crossed-out green flashing microphone and “Command Please:”.

Mykle1

@Linas123

OK, the module is loading. That’s good.

If you run arecord test.wav in a terminal window does it record a sound file?

Linas123

@Mykle1 said in Hello-Lucy Module Microphone not working:

arecord test.wav

No it doesn’t work , there is yet the error “arecord: main:828:…”. I just noticed that my USB micro is now suddenly displayed as card 1. I change yet my /.asoundrc file again. Do I have to download the module again?

Thank you for you fast replays.

Mykle1

@Linas123

arecord test.wav MUST work for Lucy to work.

If you can get that to work then run arecord -l again to get your card and device numbers,

Then enter those in the microphone config entry and run MM again

Mykle1

@Mykle1

You do NOT have to download the module again

Linas123

@Mykle1

It’s still the same as earlier. At the top is still the crossed-out green flashing microphone.

Mykle1

@Linas123

Did you get arecord test.wav to record a sound file?

I just noticed that my USB micro is now suddenly displayed as card 1.

I’m confused. Is it still reporting card 1?

Did you make the changes to your config microphone option?

How long are you waiting before quitting MM when you see thecrossed-out green flashing microphone?

Linas123

@Mykle1

I’am confused too. It’s still card 1, when I enter “arecord -l”. When the Magic Mirror runs in the background and I enter “arecord test.wav” the Error “arecord: main:828: audio open error: Device or resource busy” appears. But, when I stop the Magic Mirror with pm2, record works. After reboot the Magic Mirror is yet on the top a micro icon and "Ready, “Hello Lucy”. But when I try to ask she, nothing happens. To you have a answer for this?

sdetweil

@Linas123 said in Hello-Lucy Module Microphone not working:

But when I try to ask she, nothing happens

and you say
‘Hello Lucy’

right?

Linas123

@sdetweil
Yes, of course. I tried it again. I shouted into the microphone, although “ERROR” was displayed and Lucy reacted. But when I tried to hide the news, it took a very long time. When I tried to continue, Lucy reacted once out of 10 and in between she always showed ERROR. Can I do something that she understand me better and that the delay is not so long.

sdetweil

@Linas123 I don’t know. Was just trying to help.

Lots of times users didn’t know to say hello Lucy.

What language do you speak? Sometimes the language model cannot detect the intonation

Linas123

@sdetweil
I speak with a german accent.

Linas123

Thank you for all your help and your fast replays. Now it finally works with long charging times, but it works. Whenever I stop the Magic Mirror with pm2, the card for the microphone changes, but I can live with that because soon it will hang on the wall and then I won’t stop pm2.

sdetweil

@Linas123 said in Hello-Lucy Module Microphone not working:

Now it finally works with long charging times, but it works.

do you mean response times? (time from speak to action)

charging in english applies to batteries.

what pi device are you using?

Linas123

@sdetweil

Sorry, I’am only just 16 years old and not so good in english. I mean response time and use the RPI 3b+.

sdetweil

@Linas123 said in Hello-Lucy Module Microphone not working:

and not so good in english.

a LOT better than my german!!

wonder what else is running. 3b+ is usually pretty good
do you use SSH to connect to pi?

if so, can you do top command to see what is running?