Read the statement by Michael Teeuw here.
Hello-Lucy Module Microphone not working
-
It’s still the same as earlier. At the top is still the crossed-out green flashing microphone.
-
Did you get
arecord test.wavto record a sound file?I just noticed that my USB micro is now suddenly displayed as card 1.
I’m confused. Is it still reporting card 1?
Did you make the changes to your config microphone option?
How long are you waiting before quitting MM when you see thecrossed-out green flashing microphone?
-
I’am confused too. It’s still card 1, when I enter “arecord -l”. When the Magic Mirror runs in the background and I enter “arecord test.wav” the Error “arecord: main:828: audio open error: Device or resource busy” appears. But, when I stop the Magic Mirror with pm2, record works. After reboot the Magic Mirror is yet on the top a micro icon and "Ready, “Hello Lucy”. But when I try to ask she, nothing happens. To you have a answer for this?
-
@Linas123 said in Hello-Lucy Module Microphone not working:
But when I try to ask she, nothing happens
and you say
‘Hello Lucy’right?
-
@sdetweil
Yes, of course. I tried it again. I shouted into the microphone, although “ERROR” was displayed and Lucy reacted. But when I tried to hide the news, it took a very long time. When I tried to continue, Lucy reacted once out of 10 and in between she always showed ERROR. Can I do something that she understand me better and that the delay is not so long. -
@Linas123 I don’t know. Was just trying to help.
Lots of times users didn’t know to say hello Lucy.
What language do you speak? Sometimes the language model cannot detect the intonation
-
@sdetweil
I speak with a german accent. -
Thank you for all your help and your fast replays. Now it finally works with long charging times, but it works. Whenever I stop the Magic Mirror with pm2, the card for the microphone changes, but I can live with that because soon it will hang on the wall and then I won’t stop pm2.
-
@Linas123 said in Hello-Lucy Module Microphone not working:
Now it finally works with long charging times, but it works.
do you mean response times? (time from speak to action)
charging in english applies to batteries.
what pi device are you using?
-
Sorry, I’am only just 16 years old and not so good in english. I mean response time and use the RPI 3b+.
-
@Linas123 said in Hello-Lucy Module Microphone not working:
and not so good in english.
a LOT better than my german!!
wonder what else is running. 3b+ is usually pretty good
do you use SSH to connect to pi?if so, can you do top command to see what is running?
-
I use realVNC to see what is on my Mirror.
-
@Linas123 can u minimize mirror (alt-spacebar, n)
and then run top in a terminal window (ctrl-alt-t)
ctrl-c to exit top -
Maybe I just think that response time is slow, although it is fast for a cheap computer like the raspberry.
by top:
top - 15:54:46 up 1:12, 2 users, load average: 0,08, 0,10, 0,09 Tasks: 145 total, 3 running, 142 sleeping, 0 stopped, 0 zombie %Cpu(s): 2,5 us, 2,0 sy, 0,0 ni, 95,3 id, 0,0 wa, 0,0 hi, 0,2 si, 0,0 st MiB Mem : 925,6 total, 165,2 free, 428,2 used, 332,2 buff/cache MiB Swap: 100,0 total, 99,5 free, 0,5 used. 440,4 avail Mem PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 439 root 20 0 158332 53688 36872 R 4,6 5,7 1:22.03 Xorg 412 root 20 0 49124 32660 17316 R 3,3 3,4 1:35.48 vncserver+ 1196 pi 20 0 85152 27404 22580 S 3,3 2,9 0:03.96 x-termina+ 1171 root 20 0 0 0 0 I 1,7 0,0 0:00.67 kworker/u+ 69 root -51 0 0 0 0 S 1,0 0,0 0:05.78 irq/86-mm+ 459 root 20 0 19576 12284 11788 S 1,0 1,3 0:10.49 vncagent 1211 pi 20 0 10188 2840 2472 R 0,7 0,3 0:00.43 top 911 pi 20 0 544920 150124 81960 S 0,3 15,8 2:31.64 electron 951 pi 20 0 385260 116832 54260 S 0,3 12,3 1:23.20 electron 1127 root 20 0 0 0 0 I 0,3 0,0 0:00.11 kworker/3+ 1176 root 20 0 0 0 0 I 0,3 0,0 0:00.44 kworker/0+ 1 root 20 0 33732 7972 6412 S 0,0 0,8 0:03.68 systemd 2 root 20 0 0 0 0 S 0,0 0,0 0:00.01 kthreadd 3 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 rcu_gp 4 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 rcu_par_gp 8 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 mm_percpu+ 9 root 20 0 0 0 0 S 0,0 0,0 0:00.12 ksoftirqd+ -
@Linas123 cool, thx… nothing running really…
i also didn’t like the realtime responsiveness of the pi (til pi4)
and bought odroid and jetson nano to get more speed. -
@sdetweil
That’s a cool idea, but I don’t like to change anything on the hardware. I keep that in mind for my next project. -
@Linas123 yep, i do support most of the time, maintain the installer/updater scripts…
have a pi0, 3, 4, odroid, jetson nano I use the odroid in a production photoframe/info kiosk on the wall in my hall (no mirror glass or enclosure)
-
I put a lot of effort into building the Magic Mirror (even a frameless Magic Mirror). Without self-praise I have seen many other Magic Mirrors but mine is by far the most beautiful one and finally a voice control is part of it. It is also completely designed for a Raspberry Pi, so I don’t want to change anything now.
-
@Linas123 cool… glad you are happy with your project… it takes a lot of energy!..
-
@sdetweil Yes, I’am a bit proud of me. It’s very cool that in this forum are so helpful and nice guys.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login