[MMM-JaST] Just another Stock Ticker (new: version 2.x)

sdetweil

@popeye2002 don’t see this module at all

popeye2002

@sdetweil it was in there but hard to see with out any break

pi@raspberrypi:~/MagicMirror/modules $ cd MMM-Jast
pi@raspberrypi:~/MagicMirror/modules/MMM-Jast $ npm install

> magicmirror@2.11.0 install /home/pi/MagicMirror
> echo "Installing vendor files ...
" && cd vendor && npm install --loglevel=error

Installing vendor files ...

audited 220 packages in 4.073s
found 8 vulnerabilities (7 low, 1 high)
  run `npm audit fix` to fix them, or `npm audit` for details

> magicmirror@2.11.0 postinstall /home/pi/MagicMirror
> npm run install-fonts && echo "MagicMirror installation finished successfully! 
"


> magicmirror@2.11.0 install-fonts /home/pi/MagicMirror
> echo "Installing fonts ...
" && cd fonts && npm install --loglevel=error

Installing fonts ...

audited 1 package in 1.865s
found 0 vulnerabilities

MagicMirror installation finished successfully! 

npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@2.1.3 (node_modules/fsevents):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.1.3: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})

audited 3224 packages in 25.347s

73 packages are looking for funding
  run `npm fund` for details

found 2 low severity vulnerabilities
  run `npm audit fix` to fix them, or `npm audit` for details
pi@raspberrypi:~/MagicMirror/modules/MMM-Jast $

sdetweil

@popeye2002 something is messed up…

I suggest you erase the MMM-Jast folder and git clone again
do

cd ~/MagicMirror/modules
rm -rf MMM-Jast
git clone https://github.com/jalibu/MMM-Jast.git
cd MMM-Jast
npm install
cd ~/MagicMirror

then restart mm

pm2 restart 0

popeye2002

@sdetweil much much better!!!
and now I do see the errors for to many calls



0|MagicMirror  | [2020-04-28 11:05:25.153] [ERROR]  
0|MagicMirror  | Error processing Stock response {
0|MagicMirror  |   Note: 'Thank you for using Alpha Vantage! Our standard API call frequency is 5 ' +
0|MagicMirror  |     'calls per minute and 500 calls per day. Please visit ' +
0|MagicMirror  |     'https://www.alphavantage.co/premium/ if you would like to target a higher ' +
0|MagicMirror  |     'API call frequency.'
0|MagicMirror  | }
0|MagicMirror  | [2020-04-28 11:05:25.167] [ERROR]  
0|MagicMirror  | Error processing Stock response {
0|MagicMirror  |   Note: 'Thank you for using Alpha Vantage! Our standard API call frequency is 5 ' +
0|MagicMirror  |     'calls per minute and 500 calls per day. Please visit ' +
0|MagicMirror  |     'https://www.alphavantage.co/premium/ if you would like to target a higher ' +
0|MagicMirror  |     'API call frequency.'
0|MagicMirror  | }
0|MagicMirror  | [2020-04-28 11:05:25.460] [LOG]    
0|MagicMirror  | Sending Stock result: { symbol: 'SBUX', current: 77.74, last: 75.58 }
0|MagicMirror  | [2020-04-28 11:05:25.482] [LOG]    
0|MagicMirror  | Sending Stock result: { symbol: 'MSFT', current: 174.05, last: 174.55 }
0|MagicMirror  | [2020-04-28 11:05:25.555] [LOG]    
0|MagicMirror  | Sending Stock result: { symbol: 'JD', current: 45.58, last: 45.05 }
0|MagicMirror  | [2020-04-28 11:05:25.649] [LOG]    
0|MagicMirror  | Sending Stock result: { symbol: 'VZ', current: 58.22, last: 57.81 }
0|MagicMirror  | [2020-04-28 11:05:25.683] [LOG]    
0|MagicMirror  | Sending Stock result: { symbol: 'PFE', current: 38.1199, last: 38.33 }
0|MagicMirror  | [2020-04-28 11:05:28.263] [ERROR]  
0|MagicMirror  | Error processing Stock response {
0|MagicMirror  |   Note: 'Thank you for using Alpha Vantage! Our standard API call frequency is 5 ' +
0|MagicMirror  |     'calls per minute and 500 calls per day. Please visit ' +
0|MagicMirror  |     'https://www.alphavantage.co/premium/ if you would like to target a higher ' +
0|MagicMirror  |     'API call frequency.'

popeye2002

@sdetweil
Can’t thank you enough!!!
You really made my day a whole lot better! no idea how I may pass it along but you can belive i will pass it forward one way or another.

Cheers

Scott

sdetweil

@popeye2002 cool, thats the idea around here… we all work together

wilbur245

Hello I have installed Jast, everything is fine.
I just don’t see a share.
Biontech
FRA: 22UA
there is zero also 22UA.DE does not work.

how can i “https://www.stockdio.com/”
insert as API?

MisterTFM

What “symbol” should I use for the Dow Jones Industrial Average? I tried DJI and .DJI

RIKKO14

Hello,

does this module work for french stocks on euronext ?

wilbur245

Hello, what do I have to do so that the values are shown up to date to some extent. It is currently only queried once a day or the value renewed.
I sometimes have values for 2 days even though they have fallen or increased

DJ6sTep

@Jalibu Is there a way to have the ticker scroll all the way across the screen? Mine gets about 85% across the screen, doesn’t show all the stocks, just 4 stocks & then restarts from the beginning again.

DJ6sTep

@Jalibu also, how can I increase the font size?

Jalibu

@MisterTFM said in [MMM-JaST] Just another Stock Ticker:

What “symbol” should I use for the Dow Jones Industrial Average? I tried DJI and .DJI

Hi @MisterTFM,
as you can read here, the Alphavantage API does not provide stock indices. You could try using “DIA”.

@RIKKO14 said in [MMM-JaST] Just another Stock Ticker:

Hello,

does this module work for french stocks on euronext ?

HI @RIKKO14,
the question should better be “does the Alphavantage API work with french stocks on euronext”. To be honest: I just don’t know :-)

I just googled that list of Symbols for Alphavantage: https://github.com/prediqtiv/alpha-vantage-cookbook/blob/master/symbol-lists.md
You can easily test your Symbols by pasting this url in your browser and change the symbol value on its end:
https://www.alphavantage.co/query?function=TIME_SERIES_INTRADAY&interval=5min&apikey=3JJ4NFIVSE57V6NB&symbol=YOUR_SYMBOL_HERE

If you get a response like this, your symbol is valid and offered by the API:

{
Meta Data: {
  Information: "Daily Prices (open, high, low, close) and Volumes",
  Symbol: "BAS.DE",
  Last Refreshed: "2021-01-05",
  Output Size: "Compact",
  Time Zone: "US/Eastern"
},
Time Series (Daily): {
 2021-01-05: {
  open: "64.3000",
  high: "65.4700",
  low: "63.2600",
  close: "64.4000",
  volume: "2770107"
},

@wilbur245 said in [MMM-JaST] Just another Stock Ticker:

Hello, what do I have to do so that the values are shown up to date to some extent. It is currently only queried once a day or the value renewed.
I sometimes have values for 2 days even though they have fallen or increased

Hi @wilbur245 ,
the module always requests the latest values from the Alphavantage API. If they are not up to date, I’m afraid there is nothing we can do ¯\(ツ)/¯
The update interval between the MMM-Jast module and the Alphavantage API can be configured

config{
  updateIntervalInSeconds: 1800
}

@DJ6sTep said in [MMM-JaST] Just another Stock Ticker:

@Jalibu Is there a way to have the ticker scroll all the way across the screen? Mine gets about 85% across the screen, doesn’t show all the stocks, just 4 stocks & then restarts from the beginning again.

Hi @DJ6sTep , perhaps that’s a bug. I’ll have a look on that.

@DJ6sTep said in [MMM-JaST] Just another Stock Ticker:

@Jalibu also, how can I increase the font size?

By modifying the modules/MMM-Jast/MMM-Jast.css

Jalibu

@wilbur245 said in [MMM-JaST] Just another Stock Ticker:

Hello I have installed Jast, everything is fine.
I just don’t see a share.
Biontech
FRA: 22UA
there is zero also 22UA.DE does not work.

how can i “https://www.stockdio.com/”
insert as API?

I just checked the stockdio API. It is great, but unfortunately its free plan is limited to 500 requests per month.

DJ6sTep

@Jalibu Thank you, editing the .css file did the trick. Please let me know when you’ve had a chance to investigate this bug. This module is exactly what I was looking for man, just need to to scroll all the way across & display all my stocks :) Appreciate your work.

Jalibu

I have refactored this module from scratch. It now should also support DepotGrowth calculation in currencies other than EUR. A few internal and UI bugs were also fixed.

Please let me know if you are facing any issues with the latest version.

Koert 0

@jalibu I’m facing some problems with displaying the correct value of my stocks.

modules: [



{
module: "MMM-Jast",
position: "fullscreen_above",
config: {

maxWidth: "100%",
updateIntervalInSeconds: 0, 
fadeSpeedInSeconds: 90.5, 
scroll: "horizontal",
defaultCurrency: "EUR",
showDepotGrowth: false,
apiKey: "MY API KEY",
stocks: [
	{ name: "Porsche", symbol: "PAH3.DE" },
	{ name: "STS", symbol: "SF3.DE"},
	{ name: "Haier", symbol: "690D.DE" },
	{ name: "Siemens Energy", symbol: "ENR.DE" },
	{ name: "TUI", symbol: "TUI1.DE" },
	{ name: "HochTief", symbol: "HOT.DE" },
	{ name: "Siemens", symbol: "SIE.DE" },
	{ name: "Allianz", symbol: "ALV.DE" },
	],
	},
	},
		
	]
   };

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}

Problem 1: The ticker is showing me Values. But also a value for BTC (which isn’t mentioned in the code?!?!)

Problem 2: Values from the stock list are old Values from the beginning of the Day (or maybe last value of the day before)

maybe a Log can help you:

/home/pi/.pm2/logs/mm-out.log last 100 lines:
0|mm       | [25.03.2021 16:08.16.922] [LOG]   Sending Stock result: { symbol: 'PAH3.DE', current: 84.68, last: 87.42 }
0|mm       | [25.03.2021 16:08.16.936] [LOG]   Sending Stock result: { symbol: '690D.DE', current: 1.832, last: 1.9368 }
0|mm       | [25.03.2021 16:08.16.971] [LOG]   Sending Stock result: { symbol: 'TUI1.DE', current: 4.396, last: 4.133 }
0|mm       | [25.03.2021 16:09.18.891] [LOG]   Sending Stock result: { symbol: 'HOT.DE', current: 73.35, last: 73 }
0|mm       | [25.03.2021 16:09.18.913] [LOG]   Sending Stock result: { symbol: 'SIE.DE', current: 135.56, last: 135.98 }
0|mm       | [25.03.2021 16:09.18.974] [LOG]   Sending Stock result: { symbol: 'ALV.DE', current: 212.55, last: 211.45 }
0|mm       | [25.03.2021 16:09.19.845] [LOG]   Sending Crypto result: { symbol: 'BTC', current: 52417.17, last: 52303.65 }
0|mm       | 
0|mm       | > magicmirror@2.14.0 start /home/pi/MagicMirror
0|mm       | > DISPLAY="${DISPLAY:=:0}" ./node_modules/.bin/electron js/electron.js
0|mm       | 
0|mm       | [25.03.2021 16:26.45.698] [LOG]   Starting MagicMirror: v2.14.0
0|mm       | [25.03.2021 16:26.45.712] [LOG]   Loading config ...
0|mm       | [25.03.2021 16:26.45.733] [LOG]   Loading module helpers ...
0|mm       | [25.03.2021 16:26.46.100] [LOG]   Initializing new module helper ...
0|mm       | [25.03.2021 16:26.46.105] [LOG]   Module helper loaded: updatenotification
0|mm       | [25.03.2021 16:26.46.111] [LOG]   No helper found for module: helloworld.
0|mm       | [25.03.2021 16:26.46.112] [LOG]   All module helpers loaded.
0|mm       | [25.03.2021 16:26.46.305] [LOG]   Starting server on port 8080 ... 
0|mm       | [25.03.2021 16:26.46.329] [LOG]   Server started ...
0|mm       | [25.03.2021 16:26.46.331] [LOG]   Connecting socket for: updatenotification
0|mm       | [25.03.2021 16:26.46.332] [LOG]   Sockets connected & modules started ...
0|mm       | [25.03.2021 16:26.46.743] [LOG]   Launching application.
0|mm       | 
0|mm       | > magicmirror@2.14.0 start /home/pi/MagicMirror
0|mm       | > DISPLAY="${DISPLAY:=:0}" ./node_modules/.bin/electron js/electron.js
0|mm       | 
0|mm       | [25.03.2021 16:27.41.491] [LOG]   Starting MagicMirror: v2.14.0
0|mm       | [25.03.2021 16:27.41.506] [LOG]   Loading config ...
0|mm       | [25.03.2021 16:27.41.519] [LOG]   Loading module helpers ...
0|mm       | [25.03.2021 16:27.41.524] [LOG]   No helper found for module: clock.
0|mm       | [25.03.2021 16:27.42.080] [LOG]   Initializing new module helper ...
0|mm       | [25.03.2021 16:27.42.082] [LOG]   Module helper loaded: MMM-Jast
0|mm       | [25.03.2021 16:27.42.084] [LOG]   All module helpers loaded.
0|mm       | [25.03.2021 16:27.42.238] [LOG]   Starting server on port 8080 ... 
0|mm       | [25.03.2021 16:27.42.269] [LOG]   Server started ...
0|mm       | [25.03.2021 16:27.42.271] [LOG]   Connecting socket for: MMM-Jast
0|mm       | [25.03.2021 16:27.42.273] [LOG]   MMM-Jast helper method started...
0|mm       | [25.03.2021 16:27.42.274] [LOG]   Sockets connected & modules started ...
0|mm       | [25.03.2021 16:27.42.755] [LOG]   Launching application.
0|mm       | [25.03.2021 16:27.47.791] [LOG]   Sending Stock result: { symbol: 'ALV.DE', current: 212.55, last: 211.45 }
0|mm       | [25.03.2021 16:27.47.868] [LOG]   Sending Stock result: { symbol: 'SF3.DE', current: 7.88, last: 7.68 }
0|mm       | [25.03.2021 16:27.47.890] [LOG]   Sending Stock result: { symbol: 'ENR.DE', current: 29.38, last: 30.03 }
0|mm       | [25.03.2021 16:27.47.916] [LOG]   Sending Stock result: { symbol: '690D.DE', current: 1.832, last: 1.9368 }
0|mm       | [25.03.2021 16:27.47.960] [LOG]   Sending Stock result: { symbol: 'PAH3.DE', current: 84.68, last: 87.42 }

For Example Porsche received the same value twice
Greetings from BW to RP ;)

Jalibu

Hi @koert-0 ,

thank you for your message.

Problem 1:
There was a hidden sample crypto entry in the default settings. I removed that and improved the Readme, to avoid this confusion in the future.

Problem 2:
The problem for this is more likely to be found with the data provider than with the module.
The module displays what it gets. If the values are not up to date, then unfortunately I can’t influence that.

In general, I am rather dissatisfied with Alphavantage. Unfortunately, I don’t know a free alternative. I am open for suggestions.

Jalibu

I refactored this module again to use Yahoo’s financial API instead of Alphavantage and need some voluntary testers.

It should now support many more Symbols and be more accurate and much simpler.

Please check out this Feature Branch:
https://github.com/jalibu/MMM-Jast/tree/feat/useYahoo

BravoOscar

@jalibu

I will test it later today, but I need to know of this is this a upgrade or is it a new install.

I use the originale MMM-JaST, should this be removed before a new install?