Starter problem

kurt

@strawberry-3-141 Hey I allready visit it today! while drifting thru the forum. suprise! I lived in Barawitzkagasse for quite a long time. funny small world, isn’it?
Is the modul allready finished or are still in it?

strawberry 3.141

@kurt it should be finished

kurt

@strawberry-3.141
fine , is on my list :)

kurt

@strawberry-3.141
Hallo strawberry
Can you pleas tell me whats wrong with my config.js
By now nothing is shown. I wanted to impement the W.Linien modul, but also the weatherforcast was not shown.
Thank you in advance
Kurt

/* Magic Mirror Config Sample
 *
 * By Michael Teeuw http://michaelteeuw.nl
 * MIT Licensed.
 */

var config = {
	port: 8080,
	ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"],

	language: 'de',
	timeFormat: 24,
	units: 'metric',

	modules: [
		{
                      module: "MMM-WienerLinien",
                      position: "top_left",
                      config: {
                           api_key: "NZXDPzyd3QsAtTCT",
                           stations: ["142", "141"],
        },

		{
			module: 'alert',
		},
		{
			module: "updatenotification",
			position: "top_bar"
		},
		{
			module: 'clock',
			position: 'top_left'
		},
		
	
		{
			module: 'compliments',
			position: 'lower_third'
		},
		{
			module: 'currentweather',
			position: 'top_right',
			config: {
				location: 'Vienna Austria',
				locationID: '',  //ID from http://www.openweathermap.org
				appid: 'xxxxxxxxxxxxxxxxxxx'
			}
		},
		{
			module: 'weatherforecast',
			position: 'top_right',
			header: 'Das Wetter',
			config: {
				location: 'Vienna Austria',
				locationID: '5128581',  //ID from http://www.openweathermap.org
				appid: 'xxxxxxxxxxxxxxxxxxx'
			}
		},
		{
			module: 'newsfeed',
			position: 'bottom_bar',
			config: {
				feeds: [
					{
						title: "Der Standard",
						url: "http://derstandard.at/?page=rss&ressort=Seite1"
					}
				],
				showSourceTitle: true,
				showPublishDate: true
			}
		},
	]

};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== 'undefined') {module.exports = config;}

Note from admin: Please use Markdown on code snippets for easier reading!

in_a_days

@kurt

You’re missing a } here

{
              module: "MMM-WienerLinien",
              position: "top_left",
              config: {
                   api_key: "xxxxxxxxxxx",
                   stations: ["142", "141"],
},

should be

{
              module: "MMM-WienerLinien",
              position: "top_left",
              config: {
                   api_key: "xxxxxxxxxxx",
                   stations: ["142", "141"],
              }
},

Could be other issues, but check that out first :)

in_a_days

@kurt

Also, it’s a good idea to remove your personal API codes when sharing your config file(s).

kurt

Thank you @in_a_days
I copied your answer into the right place, but the screen stays black.

in_a_days

@kurt

You’re welcome, did you re-start the mirror program after changing the config file?

kurt

@in_a_days
Yes with strg R on the raspi

in_a_days

@kurt

Hmm. I’ll test your config.js on my system and see if I can isolate the problem.

kurt

@in_a_days
wow thanks a lot

yawns

Did you run npm install in the MMM-WienerLinien folder?

kurt

@yawns
no ! how can I do this?

in_a_days

@kurt

From a new terminal session:

cd MagicMirror/modules/MMM-WienerLinien

npm install

kurt

@in_a_days
the installation went well, but when I try to reboot the booting logo appears shortly, but thats it.
But into the MM folder there are two config folder now, one .config and one config
Either I didn’t recogbize that bevor, or one is new.

in_a_days

@kurt

Just wanted to check in. I tried to copy the config.js you posted and I had some problems as well. I’m a bit busy today, but I have some ideas and if you’re still stuck I’ll try to have a solution for you tomorrow. :)

kurt

Hallo
Has somebody an idea to help?
The internet connection is fine, cause the rss from the Ney York Times is shown.
Thank you in advance
kurt

> magicmirror@2.1.0 start /home/pi/MagicMirror
> electron js/electron.js

Starting MagicMirror: v2.1.0
Loading config ...
Loading module helpers ...
No helper found for module: alert.
Initializing new module helper ...
No helper found for module: clock.
Initializing new module helper ...
No helper found for module: compliments.
No helper found for module: currentweather.
No helper found for module: weatherforecast.
Initializing new module helper ...
All module helpers loaded.
Starting server op port 8080 ... 
Server started ...
Connecting socket for: updatenotification
Connecting socket for: calendar
Starting node helper for: calendar
Connecting socket for: newsfeed
Starting module: newsfeed
Sockets connected & modules started ...
Whoops! There was an uncaught exception...
{ Error: listen EADDRINUSE :::8080
    at Object.exports._errnoException (util.js:1026:11)
    at exports._exceptionWithHostPort (util.js:1049:20)
    at Server._listen2 (net.js:1253:14)
    at listen (net.js:1289:10)
    at net.js:1399:9
    at _combinedTickCallback (internal/process/next_tick.js:77:11)
    at process._tickCallback (internal/process/next_tick.js:98:9)
    at Module.runMain (module.js:592:11)
    at run (bootstrap_node.js:402:7)
    at startup (bootstrap_node.js:157:9)
  code: 'EADDRINUSE',
  errno: 'EADDRINUSE',
  syscall: 'listen',
  address: '::',
  port: 8080 }
MagicMirror will not quit, but it might be a good idea to check why this happened. Maybe no internet connection?
If you think this really is an issue, please open an issue on GitHub: https://github.com/MichMich/MagicMirror/issues
Launching application.

Note from admin: Please use Markdown on code snippets for easier reading!

strawberry 3.141

@kurt this means probably that there is already an instance of magicmirror running on your pi because the port is already used

kurt

@strawberry-3.141
Thank you strawberry, but how about this now?

pi@raspberrypi:~ $ DISPLAY=:0 npm start
npm ERR! Linux 4.4.38-v7+
npm ERR! argv "/usr/bin/nodejs" "/usr/bin/npm" "start"
npm ERR! node v6.9.4
npm ERR! npm  v3.10.10
npm ERR! path /home/pi/package.json
npm ERR! code ENOENT
npm ERR! errno -2
npm ERR! syscall open

npm ERR! enoent ENOENT: no such file or directory, open '/home/pi/package.json'
npm ERR! enoent ENOENT: no such file or directory, open '/home/pi/package.json'
npm ERR! enoent This is most likely not a problem with npm itself
npm ERR! enoent and is related to npm not being able to find a file.
npm ERR! enoent 

npm ERR! Please include the following file with any support request:
npm ERR!     /home/pi/npm-debug.log

Note from admin: Please use Markdown on code snippets for easier reading!

strawberry 3.141

@kurt you are in the wrong directory again :D

cd ~MagicMirror first