Starter problem

kurt

Yes, thats what i’ll do. Step by step. just change the rss feed or the compliments (does it matter how many of them you put into the modul?) weatherforcast…
Also Thanks to @tosti007
I feel comfortable in this forum!
@strawberry-3-141 by the way you are working on an hot app?

strawberry 3.141

@kurt my bachelor thesis is about a mobile app to configure the mirror

cause you are from vienna, you might want to checkout my transport module for vienna https://github.com/fewieden/MMM-WienerLinien

tosti007

@kurt no it doesn’t matter how many compliments you put in. And good to hear that you feel comfortable :) and you’re welcome!

kurt

@strawberry-3-141 Hey I allready visit it today! while drifting thru the forum. suprise! I lived in Barawitzkagasse for quite a long time. funny small world, isn’it?
Is the modul allready finished or are still in it?

strawberry 3.141

@kurt it should be finished

kurt

@strawberry-3.141
fine , is on my list :)

kurt

@strawberry-3.141
Hallo strawberry
Can you pleas tell me whats wrong with my config.js
By now nothing is shown. I wanted to impement the W.Linien modul, but also the weatherforcast was not shown.
Thank you in advance
Kurt

/* Magic Mirror Config Sample
 *
 * By Michael Teeuw http://michaelteeuw.nl
 * MIT Licensed.
 */

var config = {
	port: 8080,
	ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"],

	language: 'de',
	timeFormat: 24,
	units: 'metric',

	modules: [
		{
                      module: "MMM-WienerLinien",
                      position: "top_left",
                      config: {
                           api_key: "NZXDPzyd3QsAtTCT",
                           stations: ["142", "141"],
        },

		{
			module: 'alert',
		},
		{
			module: "updatenotification",
			position: "top_bar"
		},
		{
			module: 'clock',
			position: 'top_left'
		},
		
	
		{
			module: 'compliments',
			position: 'lower_third'
		},
		{
			module: 'currentweather',
			position: 'top_right',
			config: {
				location: 'Vienna Austria',
				locationID: '',  //ID from http://www.openweathermap.org
				appid: 'xxxxxxxxxxxxxxxxxxx'
			}
		},
		{
			module: 'weatherforecast',
			position: 'top_right',
			header: 'Das Wetter',
			config: {
				location: 'Vienna Austria',
				locationID: '5128581',  //ID from http://www.openweathermap.org
				appid: 'xxxxxxxxxxxxxxxxxxx'
			}
		},
		{
			module: 'newsfeed',
			position: 'bottom_bar',
			config: {
				feeds: [
					{
						title: "Der Standard",
						url: "http://derstandard.at/?page=rss&ressort=Seite1"
					}
				],
				showSourceTitle: true,
				showPublishDate: true
			}
		},
	]

};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== 'undefined') {module.exports = config;}

Note from admin: Please use Markdown on code snippets for easier reading!

in_a_days

@kurt

You’re missing a } here

{
              module: "MMM-WienerLinien",
              position: "top_left",
              config: {
                   api_key: "xxxxxxxxxxx",
                   stations: ["142", "141"],
},

should be

{
              module: "MMM-WienerLinien",
              position: "top_left",
              config: {
                   api_key: "xxxxxxxxxxx",
                   stations: ["142", "141"],
              }
},

Could be other issues, but check that out first :)

in_a_days

@kurt

Also, it’s a good idea to remove your personal API codes when sharing your config file(s).

kurt

Thank you @in_a_days
I copied your answer into the right place, but the screen stays black.

in_a_days

@kurt

You’re welcome, did you re-start the mirror program after changing the config file?

kurt

@in_a_days
Yes with strg R on the raspi

in_a_days

@kurt

Hmm. I’ll test your config.js on my system and see if I can isolate the problem.

kurt

@in_a_days
wow thanks a lot

yawns

Did you run npm install in the MMM-WienerLinien folder?

kurt

@yawns
no ! how can I do this?

in_a_days

@kurt

From a new terminal session:

cd MagicMirror/modules/MMM-WienerLinien

npm install

kurt

@in_a_days
the installation went well, but when I try to reboot the booting logo appears shortly, but thats it.
But into the MM folder there are two config folder now, one .config and one config
Either I didn’t recogbize that bevor, or one is new.

in_a_days

@kurt

Just wanted to check in. I tried to copy the config.js you posted and I had some problems as well. I’m a bit busy today, but I have some ideas and if you’re still stuck I’ll try to have a solution for you tomorrow. :)

kurt

Hallo
Has somebody an idea to help?
The internet connection is fine, cause the rss from the Ney York Times is shown.
Thank you in advance
kurt

> magicmirror@2.1.0 start /home/pi/MagicMirror
> electron js/electron.js

Starting MagicMirror: v2.1.0
Loading config ...
Loading module helpers ...
No helper found for module: alert.
Initializing new module helper ...
No helper found for module: clock.
Initializing new module helper ...
No helper found for module: compliments.
No helper found for module: currentweather.
No helper found for module: weatherforecast.
Initializing new module helper ...
All module helpers loaded.
Starting server op port 8080 ... 
Server started ...
Connecting socket for: updatenotification
Connecting socket for: calendar
Starting node helper for: calendar
Connecting socket for: newsfeed
Starting module: newsfeed
Sockets connected & modules started ...
Whoops! There was an uncaught exception...
{ Error: listen EADDRINUSE :::8080
    at Object.exports._errnoException (util.js:1026:11)
    at exports._exceptionWithHostPort (util.js:1049:20)
    at Server._listen2 (net.js:1253:14)
    at listen (net.js:1289:10)
    at net.js:1399:9
    at _combinedTickCallback (internal/process/next_tick.js:77:11)
    at process._tickCallback (internal/process/next_tick.js:98:9)
    at Module.runMain (module.js:592:11)
    at run (bootstrap_node.js:402:7)
    at startup (bootstrap_node.js:157:9)
  code: 'EADDRINUSE',
  errno: 'EADDRINUSE',
  syscall: 'listen',
  address: '::',
  port: 8080 }
MagicMirror will not quit, but it might be a good idea to check why this happened. Maybe no internet connection?
If you think this really is an issue, please open an issue on GitHub: https://github.com/MichMich/MagicMirror/issues
Launching application.

Note from admin: Please use Markdown on code snippets for easier reading!