MMM-Domoticz-ext: interact with Domoticz

[Manu663]

Once I calmed down and reread everything from the beginning I finally managed to get a nice result.
I feel ashamed that I called for help when it was just a silly syntax error. :sad_but_relieved_face:
Anyway, thank you for the marvelous job done there !

[goedh452]

@manu663

No problem at all! The module became a bit complex during the build :-)

[Shaitan]

Hi @goedh452,
Your mod is so great, but I think you already know that ;-).
Like the others, this is exactly what I was looking for.

But after installing it, it doesn’t display anything, just the title on my MM. I notice in the domoticz log that he contacts him but I do not know if it is a problem of connection or reception of data…

Thank a lot for your help

Here are the informations and screenshots :

Domoticz ip : 192.168.1.3
MM’s ip : 192.168.1.40

My Config.js

		{
			module: "MMM-Domoticz-ext",
			header: "Domoticz",
			position: "top_right",
			config: {
			  apiBase: "192.168.1.3",
			  apiPort: "8080",
			  updateInterval: 5,
			  animationSpeed: 0,
			  displayType: "all",
			  horizontal: true,
			  dashboardColumnCount: 2,
			  showTotals: true,
			  dashboardRooms: [ "1", "2" ],
			}
		},

My json for IDX 1

{
	"ActTime" : xxxxxx,
	"AstrTwilightEnd" : "xxxxx",
	"AstrTwilightStart" : "xxxxx",
	"CivTwilightEnd" : "xxxxxx",
	"CivTwilightStart" : "xxxxx",
	"DayLength" : "xxxxxx",
	"NautTwilightEnd" : "xxxxx",
	"NautTwilightStart" : "xxxxx",
	"ServerTime" : "xxxxxxxxx",
	"SunAtSouth" : "xxxxx",
	"Sunrise" : "xxxxx",
	"Sunset" : "xxxxx",
	"app_version" : "2021.1",
	"result" : 
	[
		{
			"AddjMulti" : 1.0,
			"AddjMulti2" : 1.0,
			"AddjValue" : 0.0,
			"AddjValue2" : 0.0,
			"BatteryLevel" : 255,
			"CustomImage" : 0,
			"Data" : "21.4 C, 56 %",
			"Description" : "",
			"DewPoint" : "12.26",
			"Favorite" : 0,
			"HardwareDisabled" : false,
			"HardwareID" : 2,
			"HardwareName" : "DHT 22 ext",
			"HardwareType" : "Dummy (Does nothing, use for virtual switches only)",
			"HardwareTypeVal" : 15,
			"HaveTimeout" : false,
			"Humidity" : 56,
			"HumidityStatus" : "Comfortable",
			"ID" : "14051",
			"LastUpdate" : "2021-11-29 15:03:03",
			"Name" : "DHT22 ext",
			"Notifications" : "false",
			"PlanID" : "0",
			"PlanIDs" : 
			[
				0
			],
			"Protected" : false,
			"ShowNotifications" : true,
			"SignalLevel" : 3,
			"SubType" : "THGN122/123/132, THGR122/228/238/268",
			"Temp" : 21.399999999999999,
			"Timers" : "false",
			"Type" : "Temp + Humidity",
			"TypeImg" : "temperature",
			"Unit" : 1,
			"Used" : 1,
			"XOffset" : "0",
			"YOffset" : "0",
			"idx" : "1",
			"trend" : 2
		}
	],
	"status" : "OK",
	"title" : "Devices"
}

My Setting on Domoticz

Log domoticz

My MM

[goedh452]

@shaitan

Hi, thanks for the compliment!

At first glance, I do not see any reason why it doesn’t work. Could you try opening the mirror in a browser on a computer: :8080.

Then open the monitor with F12 and see if the module generates error messages. Post the error messages here please.

[Shaitan]

This is what you want @goedh452 ? There are only these errors

[sdetweil]

@shaitan by default custom.css doesn’t exist… if you used my install script I would have created an empty one

but u can do this

touch ~/MagicMirror/css/custom.css

[Shaitan]

Hi @sdetweil
the new file has been created, but nothing on the MM’s screen… But this errors are been vanish !

[sdetweil]

@shaitan cool… black screen, maybe this
https://forum.magicmirror.builders/topic/15778/fix-for-black-screen-in-2-16-and-later

[Shaitan]

@sdetweil
sorry I misled you. with your command the errors have disappeared, but the display of my MM is the same as before. there is no black screen

[sdetweil]

@shaitan ok, I can’t help with the module operation… have no system like that

[Shaitan]

@sdetweil thanks anyway for this errors ! Less is the better !

[goedh452]

@shaitan

Ok, so the module doesn’t produce any errors. I’ll dive into it to see what is causing the problem.

[Shaitan]

@goedh452 ok thank you !

[Shaitan]

@goedh452
I started from zero to be sure that it is not a problem between your module and another program on my pi.
So I did a new installation of MM on another Raspberry Pi with a clean raspian.

Above, there is only your modules installed (I just copy my config.js from my other MM).
Here is the MM launch screen with SSH :

[goedh452]

@shaitan

The errors indicate that Domiticz cannot be reached. Would it be possible to temporarily disable the authentication in Domoticz and test it again?

[Shaitan]

@goedh452 I don’t know how to remove the authentication on domoticz, I just added its IP to the whitelist and I got this:

[goedh452]

@shaitan

Just remove the username en password and save the settings.

[Shaitan]

@goedh452 Same screen

[sdetweil]

@shaitan said in MMM-Domoticz-ext: interact with Domoticz:

I just added its IP to the whitelist

I just want to add for this and other folks…

when integrating multiple systems , 1st thing to do is disable all ip filtering/firewalls
in MagicMirror this is

address:"0.0.0.0", // let any outside system connect , "localhost" means ONLY apps INSIDE this same machine can connect
ipWhitelist:[],   // no restrictions on specific systems connecting.

once working, then u can add back whatever u might need… ,

and if it impacts the integration, then u will know as it is the last change…

[Fabaude]

Hello and thank you for this great module,
The installation and the settings went well but I can’t see my action buttons on my touch mirror.
The overview change buttons work well!
I integrated it into a page of MMM-Caroussel and MMM-GoogleAssistant operates my devices well but I cannot control the lights and others with touch buttons!
I hope to be clear and in the right place.

If you have any ideas…
Fab