Problems With Weather

[Mykle1]

@brendan_c23

Correction, the module loads eventually but with only one day of weather, today.

[Mykle1]

@brendan_c23

This is with your config entry:

[brendan_c23]

@mykle1 Hourly forecast: unavailable
Daily forecast: unavailable
Calls per minute: 60
3 hour forecast: 5 days
It seems these are limits for the free API key I have now. Is there a way to tweak the code so it would be compatible? I tried the npm start dev, and got a couple errors popping up, will take picture and post on here

[brendan_c23]

@brendan_c23

[brendan_c23]

@brendan_c23 Current Weather

Minute Forecast 1 hour*

Hourly Forecast 2 days*

Daily Forecast 7 days*

National Weather Alerts*

Historical weather 5 days*

Climatic Forecast 30 days
Actually, 7 day forecast should be available with the free API from openweathermap.org

[Mykle1]

@brendan_c23

You trying to run the mirror from the wrong folder. ENOENT error.

Start the mirror from within the MagicMirror directory

[brendan_c23]

@mykle1 I am sorry Im a noob. How do I run the mirror from within the directory? cd MagicMirror?

[Mykle1]

@brendan_c23 said in Problems With Weather:

cd MagicMirror?

yes sir

[brendan_c23]

@mykle1

[Mykle1]

@brendan_c23

Well, it says right in the error message that your appid is not set. Hmmm

[brendan_c23]

@mykle1

[Mykle1]

@brendan_c23

Something else is using port 8080. Most commonly it is because you have more than one instance of MM running at the same time. Or, there is another program on your pi using the same port.

[brendan_c23]

@mykle1 Is it because I am using the same APPid for both weather modules? I have triple checked that I have the correct appid that was also working for the current weather.

[Mykle1]

@brendan_c23 said in Problems With Weather:

Is it because I am using the same APPid for both weather modules?

No, you can use the appid twice. However, MM can not share port 8080

[brendan_c23]

@mykle1 How could I try fixing this?

[Mykle1]

@brendan_c23

try running pm2 status in the terminal (I think that’s the command) and post the result here please.

Don’t post a picture. Copy the terminal output and paste it into your reply.

Also, do you have any other programs running on the Pi besides Magic Mirror?

[brendan_c23]

This post is deleted!

[Mykle1]

@brendan_c23

output should look like this

pi@Pi3:~ $ pm2 status
┌──────┬──────┬────────┬───┬─────┬──────────┐
│ Name │ mode │ status │ ↺ │ cpu │ memory   │
├──────┼──────┼────────┼───┼─────┼──────────┤
│ mm   │ fork │ online │ 0 │ 0%  │ 1.3 MB   │
└──────┴──────┴────────┴───┴─────┴──────────┘
 Use `pm2 show <id|name>` to get more details about an app
pi@Pi3:~ $ 

[brendan_c23]

@mykle1 pi@raspberrypi:~ $ pm2 status
┌────┬────────────────────┬──────────┬──────┬───────────┬──────────┬──────────┐
│ id │ name │ mode │ ↺ │ status │ cpu │ memory │
├────┼────────────────────┼──────────┼──────┼───────────┼──────────┼──────────┤
│ 0 │ MagicMirror │ fork │ 6 │ online │ 0% │ 2.6mb │
└────┴────────────────────┴──────────┴──────┴───────────┴──────────┴──────────┘
pi@raspberrypi:~ $

[brendan_c23]

@mykle1 I should not have any other programs running besides the magic mirror as it is the only one I have installed , but not totally sure if there are any default programs already on there.