Problems With Weather

Mykle1

Something else is using port 8080. Most commonly it is because you have more than one instance of MM running at the same time. Or, there is another program on your pi using the same port.

brendan_c23

@mykle1 Is it because I am using the same APPid for both weather modules? I have triple checked that I have the correct appid that was also working for the current weather.

Mykle1

@brendan_c23 said in Problems With Weather:

Is it because I am using the same APPid for both weather modules?

No, you can use the appid twice. However, MM can not share port 8080

brendan_c23

@mykle1 How could I try fixing this?

Mykle1

@brendan_c23

try running pm2 status in the terminal (I think that’s the command) and post the result here please.

Don’t post a picture. Copy the terminal output and paste it into your reply.

Also, do you have any other programs running on the Pi besides Magic Mirror?

brendan_c23

This post is deleted!

Mykle1

@brendan_c23

output should look like this

pi@Pi3:~ $ pm2 status
┌──────┬──────┬────────┬───┬─────┬──────────┐
│ Name │ mode │ status │ ↺ │ cpu │ memory   │
├──────┼──────┼────────┼───┼─────┼──────────┤
│ mm   │ fork │ online │ 0 │ 0%  │ 1.3 MB   │
└──────┴──────┴────────┴───┴─────┴──────────┘
 Use `pm2 show <id|name>` to get more details about an app
pi@Pi3:~ $

brendan_c23

@mykle1 pi@raspberrypi:~ $ pm2 status
┌────┬────────────────────┬──────────┬──────┬───────────┬──────────┬──────────┐
│ id │ name │ mode │ ↺ │ status │ cpu │ memory │
├────┼────────────────────┼──────────┼──────┼───────────┼──────────┼──────────┤
│ 0 │ MagicMirror │ fork │ 6 │ online │ 0% │ 2.6mb │
└────┴────────────────────┴──────────┴──────┴───────────┴──────────┴──────────┘
pi@raspberrypi:~ $

brendan_c23

@mykle1 I should not have any other programs running besides the magic mirror as it is the only one I have installed , but not totally sure if there are any default programs already on there.

Mykle1

@brendan_c23

ok,. so try pm2 stop MagicMirror

then pm2 start MagicMirror