MMM-OpenWeatherForecast - Replacement for MMM-DarkSkyForecast

karsten13

@oberfragger said in MMM-OpenWeatherForecast - Replacement for MMM-DarkSkyForecast:

label_sunsetTimeFormat

there is no property label_sunsetTimeFormat, only label_sunriseTimeFormat, remove the not existing one …

j.e.f.f

There is only one property that is used for both sunrise and sunset: label_sunriseTimeFormat. In your example above, you’ve specified hh:mm for this property, which displays 12h time, not 24h time.

Change your config from this:

iconset: "3c",
label_hourlyTimeFormat: "k[ Uhr]",
label_sunriseTimeFormat: "hh:mm",
label_sunsetTimeFormat: "k:mm",
label_days: ["So", "Mo", "Di", "Mi", "Do", "Fr", "Sa"]

to this:

iconset: "3c",
label_hourlyTimeFormat: "k[ Uhr]",
label_sunriseTimeFormat: "k:mm",  // change the format for this one 
label_days: ["So", "Mo", "Di", "Mi", "Do", "Fr", "Sa"]

j.e.f.f

@shiryu1031 The screenshots you see in GitHub were incorrect. My old code for Dark Sky was using km/h, and I hadn’t replaced the label with m/s when I took these screen shots. So the screenshots are actually illustrating a bug! The actual speed value shown is m/s, but the label is incorrect as km/h. :beaming_face_with_smiling_eyes:

I thought about it, and it would take me just as much time to fix the screen shots as it would to add the capability to convert m/s into km/h. So now there is a new config parameter: displayKmhForWind. If you add this to your config and set it to true, m/s wind speed will be converted and displayed as km/h. This parameter only works when units is set to "metric" or "standard". If you’re using "imperial" you will always see mph.

Do a git pull in your installed MMM-OpenWeatherForecast directory to get the updated code.

j.e.f.f

@swvalenti I’ve made a modification that now truncates alerts to no more than 3 lines of description. This is controlled with CSS so if you’ve like to adjust this for more or less lines, you can do so in your custom CSS file as follows:

.MMM-OpenWeatherForecast .weather-alert .weather-alert-description {
  -webkit-line-clamp: 3; /* adjust this as desired */
}

do a git pull in your installed MMM-OpenWeatherForecast directory to get the latest code.

OberfragGER

@j-e-f-f Thx a lot! Its working now as expected.

swvalenti

@j-e-f-f thanks bro!

mielu80

Hello,

It is somehow possible to show the unit of measurement for the temperature (in my case, “C” for Celsius) ?

Thank you.

swvalenti

@j-e-f-f Last thing is it possible to just get the red to display and nothing else? Yea that’s right it’s FN 69 out here in NJ!

karsten13

concerning the duplicate weather alerts and mix up between german and english I got an answer from openweathermap.org:

Currently we receive data in such format from the provider. The development team is working on the new version of alerts, which should eliminate such behavior.

j.e.f.f

@mielu80 said in MMM-OpenWeatherForecast - Replacement for MMM-DarkSkyForecast:

It is somehow possible to show the unit of measurement for the temperature (in my case, “C” for Celsius) ?

Yes. You can do that in your custom.css file.

For the big current temperature display:

.MMM-OpenWeatherForecast .current-conditions-wrapper .current.temperature:after {
    content: "C";
}

In the extra current conditions Hi/Lo display:

.MMM-OpenWeatherForecast .extra-current-conditions-wrapper  . temperature-container . high-temperature:after,
.MMM-OpenWeatherForecast .extra-current-conditions-wrapper  . temperature-container . low-temperature:after {
    content: "C";
}

In the hourly forecast items:

.MMM-OpenWeatherForecast .forecast-item.hourly .temperature-container:after {
    content: "C";
}

In the daily forecast Hi/Lo display:

.MMM-OpenWeatherForecast .forecast-item.daily .high-temperature:after,
.MMM-OpenWeatherForecast .forecast-item.daily .low-temperature:after {
    content: "C";
}

In all of the examples above, whatever you specify for content will be displayed. So if you wanted F for Fahrenheit, you would specify content: "F";