Read the statement by Michael Teeuw here.
MMM-CalDAV
-
@caw what environment are you running?
-
@sdetweil im running the docker container on a Synology NAS
-
@caw what docker container?
-
@caw said in MMM-CalDAV:
https: means you have a certificate for that address and have configured MMM-Caldav to run in secure mode
is that true?
typically one uses mmm-caldav to read from the foreign calendar, and emit ics data for the local machine
and make it available thru a url request (which causes the MMM-Caldav module to provide the data live)
http://mmIP:mmPort/caldavor shorthand for this same system is (using the default mm port)
http://localhost:8080/caldavdepending on how MM is configured,
address: and ipWhitelist, by default it rejects ALL requests from OUTSIDE systems
so your loop back at - https://myownsynologyadress.de would be rejected…I use cloudflare to map outside requests to my systems thr a tunnel, so I have https (cert provided by cloudflare) and have reconfigured my MagicMirror to allow any incoming request
address: "0.0.0.0", ipWhitelist:[], -
@sdetweil im running the “container manager” on the nas and the container by bastilimbach installation guide by https://mariushosting.com/how-to-install-magicmirror-on-your-synology-nas/
-
@sdetweil i used ipv64 to receive a certificate - but for now i dont want to get any caldav from outside or do i missunderstand something?
-
@caw said in MMM-CalDAV:
bastilimbach
that image is 4 years old, so not running the latest node or MM…
the install doc https://docs.magicmirror.builders/getting-started/installation.html#alternative-installation-methods
references this docker image
https://gitlab.com/khassel/magicmirror -
@caw because the ics generated by MMM-Caldav is only needed on this same machine I would use
http://localhost:mmport/CALDAV
in the calendar module.
I am guessing your cert is connected to your internet IP address (ISP router)
which is then port forwarded to the MM machine…this is an external (from MM’s perspective) request
MM is configured (be default) to be a closed system on the wall, not allowing any external systems to request the MM page (external means outside the machine MM is running on)
-
@sdetweil i searched for a guide to get the Khassel container running on a Synology NAS but didn’t found anything about it. I tried it by my own but did not work. Do you have a clue how to get it on the Docker on a Synology NAS?
-
@caw my older 416j only has 512mb storage, not enough room to run docker things
but docker is docker. i thought he specified a compose or command line
see this
https://forum.magicmirror.builders/topic/18952/docker-install-on-synology-nas -
so i got the khassel image running and i think the calendars are found but i get an error:
[2024-09-05 22:42:56.488] [ERROR] Error: EACCES: permission denied, open ‘/opt/magic_mirror/modules/MMM-CalDAV/service/.SYNOLOGY_Familien_20Kalender.ics’
2024/09/05 22:42:56 stderr [2024-09-05 22:42:56.486] [ERROR] Whoops! There was an uncaught exception…do you have a clue how to fix this? im irritated by the “20” between Familien_20Kalender.ics thats no part of the calendar name…
-
@caw 20 is typically part of a name with a space in it, %20
also you have a . (dot) in front of SYNOLOGY_
-
and do you have any clue where the misstake is? and how can i fix it?
-
@caw i am going to guess
remove the dot in front of SYNOLOGY
and in the MagicMirror config mke sure there is a space where you see the 20, or make it %20one change at a time
-
@sdetweil i dont have a dot in front of the Prefix
module :“MMM-CalDAV”,
config: {
servers: [
{
envPrefix: “SYNOLOGY_”,2024/09/06 01:23:15 stderr path: ‘/opt/magic_mirror/modules/MMM-CalDAV/service/.SYNOLOGY_Simon.ics’
2024/09/06 01:23:15 stderr syscall: ‘open’,
2024/09/06 01:23:15 stderr code: ‘EACCES’,
2024/09/06 01:23:15 stderr errno: -13,
2024/09/06 01:23:15 stderr at async saveIcs (/opt/magic_mirror/modules/MMM-CalDAV/node_helper.js:76:7) {
2024/09/06 01:23:15 stderr at async Object.writeFile (node:internal/fs/promises:1212:14)
2024/09/06 01:23:15 stderr at async open (node:internal/fs/promises:639:25)
2024/09/06 01:23:15 stderr [2024-09-06 01:23:15.709] [ERROR] Error: EACCES: permission denied, open ‘/opt/magic_mirror/modules/MMM-CalDAV/service/.SYNOLOGY_Simon.ics’
2024/09/06 01:23:15 stderr [2024-09-06 01:23:15.707] [ERROR] Whoops! There was an uncaught exception…2024/09/06 01:23:14 stderr at process.processTicksAndRejections (node:internal/process/task_queues:95:5)
2024/09/06 01:23:14 stderr at NodeHelper.checkFetchStatus (/opt/magic_mirror/js/node_helper.js:110:9)
2024/09/06 01:23:14 stderr [2024-09-06 01:23:14.687] [ERROR] Calendar Error. Could not fetch calendar: http://localhost:8080/CALDAV/SYNOLOGY_Simon.ics Error: Not Found2024/09/06 01:23:14 stdout [2024-09-06 01:23:14.671] [LOG] [CALDAV] /opt/magic_mirror/modules/MMM-CalDAV/service/.SYNOLOGY_Simon.ics is not found.
2024/09/06 01:23:14 stdout [2024-09-06 01:23:14.606] [LOG] Create new calendarfetcher for url: http://localhost:8080/CALDAV/SYNOLOGY_Simon.ics - Interval: 3600000
2024/09/06 01:23:14 stdout [2024-09-06 01:23:14.539] [LOG] [CALDAV] Fetching SYNOLOGY_ : caldav … -
@caw said in MMM-CalDAV:
@sdetweil i dont have a dot in front of the Prefix
module :“MMM-CalDAV”,
config: {
servers: [
{
envPrefix: “SYNOLOGY_”,2024/09/06 01:23:15 stderr path: ‘/opt/magic_mirror/modules/MMM-CalDAV/service/.SYNOLOGY_Simon.ics’
2024/09/06 01:23:15 stderr syscall: ‘open’,
2024/09/06 01:23:15 stderr code: ‘EACCES’,
2024/09/06 01:23:15 stderr errno: -13,
2024/09/06 01:23:15 stderr at async saveIcs (/opt/magic_mirror/modules/MMM-CalDAV/node_helper.js:76:7) {
2024/09/06 01:23:15 stderr at async Object.writeFile (node:internal/fs/promises:1212:14)
2024/09/06 01:23:15 stderr at async open (node:internal/fs/promises:639:25)
2024/09/06 01:23:15 stderr [2024-09-06 01:23:15.709] [ERROR] Error: EACCES: permission denied, open ‘/opt/magic_mirror/modules/MMM-CalDAV/service/.SYNOLOGY_Simon.ics’
2024/09/06 01:23:15 stderr [2024-09-06 01:23:15.707] [ERROR] Whoops! There was an uncaught exception…i dont know what caldav wants in its setup,
sorry. you’ll have to wait for @MMRIZE to help -
[ERROR] Error: EACCES: permission denied, open ‘/opt/magic_mirror/modules/MMM-CalDAV/service/.SYNOLOGY_Simon.ics’
I’m not familiar with the Docker setting. Anyway, it seems to be a permission issue. The docker container creation and execution might be performed by different accounts. Or you may need proper permission for those files or directories. However, I have no idea of Docker environment, so that’s all I can say.
-
[ERROR] Error: EACCES: permission denied, open ‘/opt/magic_mirror/modules/MMM-CalDAV/service/.SYNOLOGY_Simon.ics’
how did you start the container? Please provide full
docker run ...command or compose file. -
Hello, I am new and wondering what do you name the file env.example to? Second What lines need to be added to the /config/config.js file?
Thanks -
@danny607 the env file name is typically
.envnote the leading dot
the linux file systems do not have a flag for hidden, so by convention anything with a leading . (dot) will not be shown in file lists unless explicitly requested
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login