MMM-Flights

yes, the map changes width because of the length of the flight data in the table below, the area inside the map does not change. You can test this with setting mapFontColor: "red", so you see the area points.

But I have to rethink this behavior or provide an option for a fixed width.

Also the map shows even with no traffic and showMap: “ifTraffic”,

will look into this, I did a rewrite of the module so maybe this was lost …

lif

@sdetweil said in MMM-Flights:

@lif can u show the config for this module
module code

/**
 * @file MMM-Flights.js
 *
 * @author Karsten Hassel
 * @license MIT
 *
 * @see  https://gitlab.com/khassel/MMM-Flights
 */

Module.register("MMM-Flights", {
  defaults: {
    provider: "flightradar24",
    instanceId: "FR", // needs to be set to different values if you run more than 1 instance of this module
    // // example for ADSBexchange:
    // provider: "ADSBexchange",
    // providerApiKey: "your-api-key",
    // providerUrl: "https://adsbx-flight-sim-traffic.p.rapidapi.com/api/aircraft/json",
    // // example for opensky:
    // provider: "opensky",
    // providerApiKey: "user:password", //optional, without limited requests
    // providerUrl: "https://opensky-network.org/api/states/all",
    unknown: "?", // string used if no data available
    title: "Flights Above Us",
    logoTitle: "fas fa-plane",
    logoUp: "fas fa-plane-departure",
    logoDown: "fas fa-plane-arrival",
    logoTo: "fas fa-arrow-right",
    // area defined by a bounding box of WGS84 coordinates (la=latitude, lo=longitude):
    laMin: 49.85,
    laMax: 50.25,
    loMin: 7.8,
    loMax: 9.3,
    showGrounded: false, // show grounded airplanes
    showMap: "ifTraffic", // "always", "never", "ifTraffic"
    noFlightsMessage: "Currently no flights in chosen area ...", // message shown if no data available
    mapUrl: "https://{a-d}.basemaps.cartocdn.com/light_all/{z}/{x}/{y}.png", // you can bring your own map
//    mapAttributions:      '',
    mapHeight: "300px",
    mapFixedArea: true, // if set, the defined area is shown, if not the area is calculated from the plane locations
    mapPosition: "bottom", // "top" or "bottom"
    // some params to define styles in map:
    mapFont: "40% sans-serif",
    mapPadding: [1, 5, 0, 7],
    mapFontColor: "white",
    mapBackgroundColor: "black",
    mapCurrentFlightColor: "#9c294f",
    mapBackgroundOpacity: 0.9,
    mapPlanePngSrc: "modules/MMM-Flights/data/plane.png",
    mapPlanePngScale: 0.07,
    mapPlaneTextOffset: 4,
    useMockData: false, // if set, test data is used
    updateInterval: 2 * 60 * 1000, // every 2 minutes
    units: "imperial", // metric uses m and km/h, imperial uses ft and mph
  },

Config.js

  {
      module: "MMM-Flights",
      position: "center",
      config: {
        laMin: 45.80,
        laMax: 46.0081,
        loMin: 0.4674,
        loMax: 1.207,
      },
    },

Hope this helps

Regards

lif

@karsten13 said in MMM-Flights:

@lif said in MMM-Flights:

The map changes width depending upon the ac in the area.

yes, the map changes width because of the length of the flight data in the table below, the area inside the map does not change. You can test this with setting mapFontColor: "red", so you see the area points.

Ah, OK, I’ll change the font size down a bit.

But I have to rethink this behavior or provide an option for a fixed width.

Also the map shows even with no traffic and showMap: “ifTraffic”,

will look into this, I did a rewrite of the module so maybe this was lost …

Yes, it did work before I applied an update this morning

Thanks for your help.