PIR sensor to turn on LED strip

sdetweil

@Egnos that led module can only on/off/ or blink

Egnos

@sdetweil said in PIR sensor to turn on LED strip:

that led module can only on/off/ or blink

At the moment I could be satisfied … but it does not seem that the module proposed by you can receive notifications.

sdetweil

@Egnos notifications are easy… but this module rpi-leds, only toggles the leds ON the pi board… not led strip…

if u can find one that works the ed strip with a python command, then we can make that work

Egnos

@sdetweil said in PIR sensor to turn on LED strip:

but this module rpi-leds, only toggles the leds ON the pi board… not led strip…

Maybe this module could fit https://github.com/jc21/MMM-PiLights, using SPI and a LPD8806 or WS2801 LED strip.

@sdetweil said in PIR sensor to turn on LED strip:

if u can find one that works the ed strip with a python command, then we can make that work

It appears to respond to notifications:

this.sendNotification('PILIGHTS_SEQUENCE', 'blue_pulse');

sdetweil

@Egnos it has a way for all off. but not all on.

sdetweil

@Egnos use my updated fork…

https://github.com/sdetweil/MMM-PiLights

it responds to the PIR modules USER_PRESENCE notification (true = turn on, false = turn off)

if lights are off and on is sent, it will restore the previous sequence set with the normal
SEQUENCE notification

wishmaster270

Hi,

I would suggest the solution of @sdetweil as well.

An other, but much more complicate version would be to use my PythonLedControl and control it with the MMM-MQTTbridge module.

Egnos

@sdetweil said in PIR sensor to turn on LED strip:

use my updated fork…
https://github.com/sdetweil/MMM-PiLights
it responds to the PIR modules USER_PRESENCE notification (true = turn on, false = turn off)
if lights are off and on is sent, it will restore the previous sequence set with the normal
SEQUENCE notification

Thanks @sdetweil

Let’s see if I understand:

By default the LEDs will be off, until the “MMM-GPIO-Notifications” module detects something.
If the PIR detects the movement the “MMM-GPIO-Notifications” module will send the notification USER_PRESENCE = true and the LEDs will turn on
After some time without movement the “MMM-GPIO-Notifications” module will send the notification USER_PRESENCE = false and the LEDs will turn off

Correct?

I’m not a developer, but I’m still trying to understand your change in the code:

else if (notification === ' USER_PRESENCE'){
            if(payload == false){
                this.leds.allOFF();
            } else {
                // user present, restore the last active sequence
                Promise.resolve(this.runSequence(this.lastSequence.sequence, thi,lastSequence.iterations,this.lastSequence.delay)
                .catch((err) => {
                    this.log('user present Sequence error: ' + err.message);
                }));

why can’t I see this notification in the code?

(notification === ' USER_PRESENCE'){
            if(payload == true){
                this.leds.allON();
            }

Thanks again!

MMRIZE

@Egnos
' USER_PRESENCE' !== 'USER_PRESENCE'

sdetweil

@Egnos fixed the typo, git pull for the update

sdetweil

@MMRIZE good catch

sdetweil

@Egnos u don’t need the GPIO_Notifications module. as the PIR modules send the USER_PRESENCE notification

Egnos

@sdetweil said in PIR sensor to turn on LED strip:

u don’t need the GPIO_Notifications module. as the PIR modules send the USER_PRESENCE notification:

The module I use for sending notifications when the PIR detects motion is MMM-GPIO-Notifications
I believe he is sending the “USER_PRESENCE” notification:

notifications: [
            {
              notification: 'USER_PRESENCE',
              payload: true
            },

Thanks for your patience @sdetweil ! ;-)

sdetweil

@Egnos ok got it.

what I was saying is that the

MMM-PIR-???

modules, if you use them, THEY send the USER_PRESENCE notification

the GPIO_Notifcations module is more generic and can send notifications for ANY gpio device

Egnos

@sdetweil said in PIR sensor to turn on LED strip:

@Egnos ok got it.
what I was saying is that the
MMM-PIR-???
modules, if you use them, THEY send the USER_PRESENCE notification
the GPIO_Notifcations module is more generic and can send notifications for ANY gpio device

Ok ok, I just wanted to be sure that, in my case, the MMM-GPIO-Notifications module sends the “USER_PRESENCE” notification.
I knew that the module I am using is a collector of GPIO devices…

Thanks @sdetweil

OberfragGER

@Egnos Just in case…
Im using ioBroker @home (thats a free Smart Home Software). WIth that i also have installed MQTT. Any other Smart Home software like Home Assist can do the same.
I also installed Hyperion on the same Raspyberry i have installed MagicMirror. Inside ioBroker iam using the Hyperion adapter.
So with any “user_presence” i get the MQTT informartion… and that triggers a scipt inside ioBroker to activate Hyperion.

If your using any smart home software as well… this should be an easy thing. Feel free to ask…

Egnos

@OberfragGER thanks for the valuable advice and for your availability, now I’ll read something.

In the meantime, can you tell me an LED strip (not necessarily RGB …) that is compatible with this project?

Thank you all.

OberfragGER

@Egnos I have to add… i use also the Module https://github.com/olexs/MMM-UserPresenceToMQTT

For the LED-Strip… i use a WS2812. Its adessable an u can use it with 5V and it preconfigured in Hyperion.

Egnos

@OberfragGER said in PIR sensor to turn on LED strip:

For the LED-Strip… i use a WS2812. Its adessable an u can use it with 5V and it preconfigured in Hyperion

Where did you buy the LED strip? They seem very expensive …

I have seen the connection between RPI and LED strip but I do not understand why the external 5V power supply must also be connected to the RPI, is it not enough to connect it to the LED strip?

If I really have to connect the power supply to the RPI as well, how do you do if you have both PINs of the 5V GPIO occupied?

Egnos

I found these https://a.aliexpress.com/_EwF3KTV.
The WS2813 strip is 5V.
Can be fine?