Google Calendars not loading

[sdetweil]

@mspk weird…

your post was makred as spam which I can’t override…
please use a code block around this info

paste text(blank line above and below)
select text just pasted
hit the button </>

if you used my script, I increased the size of the swap space

free -m

should show that

calendars keep all the OLD events… since the calendar was created… SO… you could have a LOT of entries to process…

your spam post shows calendars sending events to the front end to display

[mspk]

@sdetweil I’ll try that. Funny aboutz the spam, I used the </> button…

[mspk]

@sdetweil

pi@raspberrypi:~ $ free -m
               total        used        free      shared  buff/cache   available
Mem:             363         169          88          23         105         115
Swap:           2047         227        1820

[sdetweil]

@mspk said in Google Calendars not loading:

Mem: 363

weird that there is only 363… as its supposed to have 512…

I have one here… I’ll power it up

[sdetweil]

@mspk doc

The installed RAM is 524,288KB.
The usable RAM is 437,868 KB

mine

              total        used        free      shared  buff/cache   available
Mem:             426         134         117          10         175         232
Swap:             99           1          98

[mspk]

@sdetweil When I played around a bit, i gave the gpu 128MB, I guess thats why. Just set it back to 64, and now it shows 426 for me too. But the calendars are still not complete…
The status right now is following:
Calendar 1 seems to be complete.
Calandar 2 is not loading at all.
Calendar 3 seems complete (i guess for the one month that it shows in my module).
Calendar 4 is there, but not updated (I changed the title).
Calendar 5 is also missing.

Do I need to reset something maybe?

P.S.: It’ still slow.

[sdetweil]

@mspk are u willing to share the url of one of the not loading cals…

you can use chat here so no email flow…

[sdetweil]

@mspk all of the urls worked without issue

so, try this
stop mm

cd ~/MagicMirror
npm install electron@28.1.1

retry MM

[mspk]

@sdetweil Already did that a few hours ago, but nothing changed…

[sdetweil]

@mspk ok, one other thing, in the system network preferences, disable ipv6

desktop, menu top left, preferences, pi config, network.

the electron version is supposed to have the fix for this (trying to talk ipv6 to an ipv4 server… oops can’t connect)

[mspk]

@sdetweil

also already done.

[sdetweil]

@mspk and rebooted???

from command line

ip addr

[mspk]

@sdetweil

2: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether d8:3a:dd:87:e0:80 brd ff:ff:ff:ff:ff:ff
    inet 192.168.178.68/24 brd 192.168.178.255 scope global dynamic noprefixroute wlan0
       valid_lft 863889sec preferred_lft 755889sec
    inet6 2a0b:9e00:116f:fe30:da3a:ddff:fe87:e080/64 scope global dynamic mngtmpaddr
       valid_lft 7085sec preferred_lft 3485sec
    inet6 fe80::da3a:ddff:fe87:e080/64 scope link
       valid_lft forever preferred_lft forever

[sdetweil]

@mspk said in Google Calendars not loading:

inet6 2a0b:9e00:116f:fe30:da3a:ddff:fe87:e080/64 scope global dynamic mngtmpaddr
valid_lft 7085sec preferred_lft 3485sec
inet6 fe80::da3a:ddff:fe87:e080/64 scope link
valid_lft forever preferred_lft forever

still enabled

[mspk]

@sdetweil disabled it inside the sysctl.conf, dont know why it didn’t change

[mspk]

wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether d8:3a:dd:87:e0:80 brd ff:ff:ff:ff:ff:ff
inet 192.168.178.68/24 brd 192.168.178.255 scope global dynamic noprefixroute wlan0
valid_lft 863983sec preferred_lft 755983sec

[valentindey]

Hi,

Is there any update on this?

I seem to have the same (or similar) issue on a Raspberry Pi 3. For me it’s just one out of a few calendars that isn’t working and I also get the vulkan error message.
The calendar has been working before but I can’t seem to trace it back to a recent change.
I already started MM with node option --dns-result-order=ipv4first as the calendars come from a Nextcloud instance which does not support ipv6.

[sdetweil]

@valentindey we haven’t got a clear indication where the trouble is. is it in electron, ? or …

did you try electron 28.1.1?

npm install electron@28.1.1

[valentindey]

@sdetweil yes, I tried an older version and the newer version of electron. So far to no avail.

Checking the logs I see that events are fetched from the calendar in question, so it’s something about displaying them.
Also, running the exact same setup on another machine works perfectly fine.

[sdetweil]

@valentindey yeh, its weird for sure…

lets go back to the prior parser

cd ~/MagicMirror
npm install node-ical@0.16.1

and restart MagcMirror