Google Calendars not loading

mspk

2: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether d8:3a:dd:87:e0:80 brd ff:ff:ff:ff:ff:ff
    inet 192.168.178.68/24 brd 192.168.178.255 scope global dynamic noprefixroute wlan0
       valid_lft 863889sec preferred_lft 755889sec
    inet6 2a0b:9e00:116f:fe30:da3a:ddff:fe87:e080/64 scope global dynamic mngtmpaddr
       valid_lft 7085sec preferred_lft 3485sec
    inet6 fe80::da3a:ddff:fe87:e080/64 scope link
       valid_lft forever preferred_lft forever

sdetweil

@mspk said in Google Calendars not loading:

inet6 2a0b:9e00:116f:fe30:da3a:ddff:fe87:e080/64 scope global dynamic mngtmpaddr
valid_lft 7085sec preferred_lft 3485sec
inet6 fe80::da3a:ddff:fe87:e080/64 scope link
valid_lft forever preferred_lft forever

still enabled

mspk

@sdetweil disabled it inside the sysctl.conf, dont know why it didn’t change

mspk

wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether d8:3a:dd:87:e0:80 brd ff:ff:ff:ff:ff:ff
inet 192.168.178.68/24 brd 192.168.178.255 scope global dynamic noprefixroute wlan0
valid_lft 863983sec preferred_lft 755983sec

valentindey

Hi,

Is there any update on this?

I seem to have the same (or similar) issue on a Raspberry Pi 3. For me it’s just one out of a few calendars that isn’t working and I also get the vulkan error message.
The calendar has been working before but I can’t seem to trace it back to a recent change.
I already started MM with node option --dns-result-order=ipv4first as the calendars come from a Nextcloud instance which does not support ipv6.

sdetweil

@valentindey we haven’t got a clear indication where the trouble is. is it in electron, ? or …

did you try electron 28.1.1?

npm install electron@28.1.1

valentindey

@sdetweil yes, I tried an older version and the newer version of electron. So far to no avail.

Checking the logs I see that events are fetched from the calendar in question, so it’s something about displaying them.
Also, running the exact same setup on another machine works perfectly fine.

sdetweil

@valentindey yeh, its weird for sure…

lets go back to the prior parser

cd ~/MagicMirror
npm install node-ical@0.16.1

and restart MagcMirror

eniac

@sdetweil said in Google Calendars not loading:

let`s go back to the prior parser
cd ~/MagicMirror
npm install node-ical@0.16.1

and restart MagcMirror

Does the Job. Thank you …

sdetweil

@eniac thanks for the feedback