MagicMirror does not start in full screen

sdetweil

@drx1984 said in MagicMirror does not start in full screen:

can I fix the problem with this entry? and in which line do I add this “electronOptions:{width:xxxx, height:yyyy}” parameter in config.js

as I said, in the same group of properties as the address: property

drx1984

@sdetweil Sorry, I don’t fully understand you. can you enlighten me?

sdetweil

@drx1984
anywhere in this group


	address: "0.0.0.0", 	// Address to listen on, can be:
							// - "localhost", "127.0.0.1", "::1" to listen on loopback interface
							// - another specific IPv4/6 to listen on a specific interface
							// - "0.0.0.0", "::" to listen on any interface
							// Default, when address config is left out or empty, is "localhost"
	port: 8090,
	basePath: "/", 	// The URL path where MagicMirror² is hosted. If you are using a Reverse proxy
					// you must set the sub path here. basePath must end with a /
	ipWhitelist: [], 	// Set [] to allow all IP addresses
															// or add a specific IPv4 of 192.168.1.5 :
															// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
															// or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
															// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	useHttps: false, 		// Support HTTPS or not, default "false" will use HTTP
	httpsPrivateKey: "", 	// HTTPS private key path, only require when useHttps is true
	httpsCertificate: "", 	// HTTPS Certificate path, only require when useHttps is true

	language: "en",
	locale: "en-US",
	logLevel: ["INFO", "LOG", "WARN", "ERROR"], // Add "DEBUG" for even more logging
	timeFormat: 24,
	units: "metric",
	// serverOnly:  true/false/"local" ,
	// local for armv6l processors, default
	//   starts serveronly and then starts chrome browser
	// false, default for all NON-armv6l devices
	// true, force serveronly mode, because you want to.. no UI on this device

drx1984

@sdetweil Can’t you tell me exactly which line?
I have now entered it as shown in the picture but unfortunately it doesn’t work.

sdetweil

@drx1984 in between ANY line in that group… js is a name/value pair, so it doesn’t matter the order…

BUT you have the wrong values in portrait mode…

height is 1920, width is 1080

is it correct on the physical screen?

from the eletron doc

https://www.electronjs.org/docs/latest/api/browser-window

new BrowserWindow([options])
options BrowserWindowConstructorOptions (optional)
width Integer (optional) - Window's width in pixels. Default is 800.
height Integer (optional) - Window's height in pixels. Default is 600.
x Integer (optional) - (required if y is used) Window's left offset from screen. Default is to center the window.
y Integer (optional) - (required if x is used) Window's top offset from screen. Default is to center the window.
useContentSize boolean (optional) - The width and height would be used as web page's size, which means the actual window's size will include window frame's size and be slightly larger. Default is false.
center boolean (optional) - Show window in the center of the screen. Default is false.
minWidth Integer (optional) - Window's minimum width. Default is 0.
minHeight Integer (optional) - Window's minimum height. Default is 0.

drx1984

@sdetweil yes, the resolution is as follows under system settings:
The monitor is a 24 inch/full HD and is set to portrait format.
then the values should be correct 1920x1080 right?

sdetweil

@drx1984 wider than taller (1920x1080) (w,h) is landscape mode

taller than wider (1080x1920) (w,h) is portrait mode

are you trying to do both at the same time?

landscape on physical screen and portrait over connection?

can’t do that, physical screen wins

drx1984

@sdetweil
Good morning,
So even if I set physical landscape format and restart the system, the MagicMirror doesn’t appear in full screen >> look at the photo I took on my cell phone without Anydesk access.

And I uploaded a video clip to YouTube: https://www.youtube.com/watch?v=gjiYQ21SoKI

And I entered the entry with: electronOptions:{width:xxxx, height:yyyy}:

Where else can the problem be?
Thanks for your help.

sdetweil

@drx1984 in the electronOptions add at the end

,fullScreen:true

note the leading comma, as this will be after the height:1080

drx1984

@sdetweil Is that what you mean>> electronOptions:{width:1920, height:1080, fullScreen:true}, ?

unfortunately nothing came of it