MagicMirror does not start in full screen

drx1984

@sdetweil Sorry, I don’t fully understand you. can you enlighten me?

sdetweil

@drx1984
anywhere in this group


	address: "0.0.0.0", 	// Address to listen on, can be:
							// - "localhost", "127.0.0.1", "::1" to listen on loopback interface
							// - another specific IPv4/6 to listen on a specific interface
							// - "0.0.0.0", "::" to listen on any interface
							// Default, when address config is left out or empty, is "localhost"
	port: 8090,
	basePath: "/", 	// The URL path where MagicMirror² is hosted. If you are using a Reverse proxy
					// you must set the sub path here. basePath must end with a /
	ipWhitelist: [], 	// Set [] to allow all IP addresses
															// or add a specific IPv4 of 192.168.1.5 :
															// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
															// or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
															// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	useHttps: false, 		// Support HTTPS or not, default "false" will use HTTP
	httpsPrivateKey: "", 	// HTTPS private key path, only require when useHttps is true
	httpsCertificate: "", 	// HTTPS Certificate path, only require when useHttps is true

	language: "en",
	locale: "en-US",
	logLevel: ["INFO", "LOG", "WARN", "ERROR"], // Add "DEBUG" for even more logging
	timeFormat: 24,
	units: "metric",
	// serverOnly:  true/false/"local" ,
	// local for armv6l processors, default
	//   starts serveronly and then starts chrome browser
	// false, default for all NON-armv6l devices
	// true, force serveronly mode, because you want to.. no UI on this device

drx1984

@sdetweil Can’t you tell me exactly which line?
I have now entered it as shown in the picture but unfortunately it doesn’t work.

sdetweil

@drx1984 in between ANY line in that group… js is a name/value pair, so it doesn’t matter the order…

BUT you have the wrong values in portrait mode…

height is 1920, width is 1080

is it correct on the physical screen?

from the eletron doc

https://www.electronjs.org/docs/latest/api/browser-window

new BrowserWindow([options])
options BrowserWindowConstructorOptions (optional)
width Integer (optional) - Window's width in pixels. Default is 800.
height Integer (optional) - Window's height in pixels. Default is 600.
x Integer (optional) - (required if y is used) Window's left offset from screen. Default is to center the window.
y Integer (optional) - (required if x is used) Window's top offset from screen. Default is to center the window.
useContentSize boolean (optional) - The width and height would be used as web page's size, which means the actual window's size will include window frame's size and be slightly larger. Default is false.
center boolean (optional) - Show window in the center of the screen. Default is false.
minWidth Integer (optional) - Window's minimum width. Default is 0.
minHeight Integer (optional) - Window's minimum height. Default is 0.

drx1984

@sdetweil yes, the resolution is as follows under system settings:
The monitor is a 24 inch/full HD and is set to portrait format.
then the values should be correct 1920x1080 right?

sdetweil

@drx1984 wider than taller (1920x1080) (w,h) is landscape mode

taller than wider (1080x1920) (w,h) is portrait mode

are you trying to do both at the same time?

landscape on physical screen and portrait over connection?

can’t do that, physical screen wins

drx1984

@sdetweil
Good morning,
So even if I set physical landscape format and restart the system, the MagicMirror doesn’t appear in full screen >> look at the photo I took on my cell phone without Anydesk access.

And I uploaded a video clip to YouTube: https://www.youtube.com/watch?v=gjiYQ21SoKI

And I entered the entry with: electronOptions:{width:xxxx, height:yyyy}:

Where else can the problem be?
Thanks for your help.

sdetweil

@drx1984 in the electronOptions add at the end

,fullScreen:true

note the leading comma, as this will be after the height:1080

drx1984

@sdetweil Is that what you mean>> electronOptions:{width:1920, height:1080, fullScreen:true}, ?

unfortunately nothing came of it

sdetweil

@drx1984 yes…

what OS is this

show results of

lsb_release -a
uname -a

also, stop MagicMirror and then delete the .config for Electron as before

then restart MagicMirror

drx1984

@sdetweil Unfortunately I have to leave now sry, I’ll get back to you tomorrow.
There is an Ubuntu 22.04.4 installed on an IntelNuc.

I have another YouTube video >you can see how it is briefly in full screen at the start and then the full screen goes away again. Watch the video clip until the end: https://www.youtube.com/watch?v=5fRf2pJuET8

thanks

sdetweil

@drx1984 ok, how are u launching mm?

show results of

pm2 status

drx1984

@sdetweil
Good morning, MagicMirror actually starts when I restart, but I can also start MagicMirror in the terminal with pm2 start.

If I start the MagicMirror myself via the terminal, everything is displayed in full screen, but not when I reboot.

I installed MagicMirror with this script: bash -c “$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/raspberry.sh)”

Everything works, except the full screen doesn’t work when IntelNuc is restarted.

sdetweil

@drx1984 thats my install script

so, lets create the pm2 entry

pm2 stop all
pm2 delete 0
pm2 save -f
# run script from my list to setup pm2
bash -c "$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/fixuppm2.sh)"

drx1984

@sdetweil I just tried, unfortunately still no full screen after restarting.

sdetweil

@drx1984 hm…

can you do

pm2 info 0 >somefile.txt

and send me the somefile.txt at my same userid on gmail

drx1984

@sdetweil OK, I created it. what is your email address?
or can I post it here too?

sdetweil

@drx1984 don’t post here, too much stuff

I gave you my email

my same userid on gmail

I protect myself against scrapers looking for email

drx1984

@sdetweil OK, all right, I just sent you the file

sdetweil

@drx1984 ok, don’t see it yet