Problem Adding Buttons & required Remote-Control Modules

awwbaker

Mr @sdetweil
I tested my button press using:

import RPi.GPIO as GPIO
import time

GPIO.setmode(GPIO.BCM)
GPIO.setup(6, GPIO.IN, pull_up_down=GPIO.PUD_UP)

while True:
input_state = GPIO.input(6)
if input_state == False:
print(‘Button Pressed’)
time.sleep(0.2)

That worked fine. I found the module MMM-ModuleToggleButton which seemed a bit simpler and directly what wanted to do. The demo script used GPIO 6 so used default. Do i need to use a pull_down resister? Thank Thank you again! VR Anthony

PS: Sam I looked for a link to buy you a cup of coffee, not found, but if you have one, please forward?

awwbaker

Mr @sdetweil, I also noted the below error ? Thank you!

[2024-09-20 16:36:07.413] [LOG] Sockets connected & modules started …
[2024-09-20 16:36:10.523] [LOG] Launching application.
[2024-09-20 16:36:15.920] [INFO] System information:

SYSTEM: manufacturer: ; model: ; raspberry: undefined; virtual: false

OS: platform: linux; distro: Debian GNU/Linux; release: 12; arch: arm64; kernel: 6.6.47+rpt-rpi-v8

VERSIONS: electron: 31.1.0; used node: 20.14.0; installed node: 22.9.0; npm: 10.8.3; pm2: 5.4.1

OTHER: timeZone: America/New_York; ELECTRON_ENABLE_GPU: undefined

[2024-09-20 16:36:20.989] [ERROR] Whoops! There was an uncaught exception…
[2024-09-20 16:36:21.019] [ERROR] Error: EINVAL: invalid argument, write
at Object.writeFileSync (node:fs:2346:20)
at exportGpio (/home/awwbaker/MagicMirror/modules/MMM-ModuleToggleButton/node_modules/onoff/onoff.js:18:8)
at new Gpio (/home/awwbaker/MagicMirror/modules/MMM-ModuleToggleButton/node_modules/onoff/onoff.js:172:36)
at Class.socketNotificationReceived (/home/awwbaker/MagicMirror/modules/MMM-ModuleToggleButton/node_helper.js:20:22)
at Socket. (/home/awwbaker/MagicMirror/js/node_helper.js:98:11)
at Socket.emit (node:events:519:28)
at Socket.emitUntyped (/home/awwbaker/MagicMirror/node_modules/socket.io/dist/typed-events.js:69:22)
at /home/awwbaker/MagicMirror/node_modules/socket.io/dist/socket.js:704:39
at process.processTicksAndRejections (node:internal/process/task_queues:77:11) {
errno: -22,
code: ‘EINVAL’,
syscall: ‘write’
}
[2024-09-20 16:36:21.022] [ERROR] MagicMirrorÂ² will not quit, but it might be a good idea to check why this happened. Maybe no internet connection?
[2024-09-20 16:36:21.027] [ERROR] If you think this really is an issue, please open an issue on GitHub: https://github.com/MagicMirrorOrg/MagicMirror/issues
[2024-09-20 16:36:21.066] [LOG] Create new calendarfetcher for url: http://p134-caldav.icloud.com/published/2/ODY3MDc3ODQxODY3MDc3OIsPCPqyTd7gfFTuhUgnU3E8veSROaMD9lC0bXMqbeTrcdUcRFgL2q0GROkcc6XtdbepSRYxUGbDtoDb3se2UkE - Interval: 604800000
[2024-09-20 16:36:21.372] [LOG] Create new calendarfetcher for url: http://p134-caldav.icloud.com/published/2/ODY3MDc3ODQxODY3MDc3OIsPCPqyTd7gfFTuhUgnU3HnE0ZEnCaHErJrwvkzJ3o- -

sdetweil

@awwbaker ps: i don’t accept coffee etc. i do this because i truly enjoy it.
i love the challenge, the great people here, and the fascinatingly huge amount of differences among all your designs.

sdetweil

@awwbaker on the write

see second post here

https://forums.raspberrypi.com/viewtopic.php?t=367431

awwbaker

Dear Mr @sdetweil
I think you are teaching me to fish…Did you see the error message below? Beyond the below, I booted the RPI 3B+, ran the “pinctrl set 6 op dl” command. Started MM and as previously the expected modules were hidden on start up. Pressing pushbutton did not have any affect on the display. I ran the button.py script and the button was sensed as previous. As your time permits I could use another push. Your efforts are VERY appreciated. VR Anthony Baker

2024-09-21 13:33:31.232] [LOG] Connecting socket for: MMM-MktIndex
[2024-09-21 13:33:31.234] [LOG] Sockets connected & modules started …
[1856:0921/133334.081312:ERROR:object_proxy.cc(576)] Failed to call method: org.freedesktop.DBus.StartServiceByName: object_path= /org/freedesktop/DBus: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
[2024-09-21 13:33:35.622] [LOG] Launching application.
[2024-09-21 13:33:55.076] [INFO] System information:

SYSTEM: manufacturer: ; model: ; raspberry: undefined; virtual: false

OS: platform: linux; distro: Debian GNU/Linux; release: 12; arch: arm64; kernel: 6.6.47+rpt-rpi-v8

VERSIONS: electron: 31.1.0; used node: 20.14.0; installed node: 22.9.0; npm: 10.8.3; pm2:

OTHER: timeZone: America/New_York; ELECTRON_ENABLE_GPU: undefined

[2024-09-21 13:33:58.321] [ERROR] Whoops! There was an uncaught exception…
[2024-09-21 13:33:58.343] [ERROR] Error: EINVAL: invalid argument, write
at Object.writeFileSync (node:fs:2346:20)
at exportGpio (/home/awwbaker/MagicMirror/modules/MMM-ModuleToggleButton/node_modules/onoff/onoff.js:18:8)
at new Gpio (/home/awwbaker/MagicMirror/modules/MMM-ModuleToggleButton/node_modules/onoff/onoff.js:172:36)
at Class.socketNotificationReceived (/home/awwbaker/MagicMirror/modules/MMM-ModuleToggleButton/node_helper.js:20:22)
at Socket. (/home/awwbaker/MagicMirror/js/node_helper.js:98:11)
at Socket.emit (node:events:519:28)
at Socket.emitUntyped (/home/awwbaker/MagicMirror/node_modules/socket.io/dist/typed-events.js:69:22)
at /home/awwbaker/MagicMirror/node_modules/socket.io/dist/socket.js:704:39
at process.processTicksAndRejections (node:internal/process/task_queues:77:11) {
errno: -22,
code: ‘EINVAL’,
syscall: ‘write’
}
[2024-09-21 13:33:58.345] [ERROR] MagicMirrorÂ² will not quit, but it might be a good idea to check why this happened. Maybe no internet connection?
[2024-09-21 13:33:58.347] [ERROR] If you think this really is an issue, please open an issue on GitHub: https://github.com/MagicMirrorOrg/MagicMirror/issues
[1976:0921/133401.533219:ERROR:gl_utils.cc(424)] [.WebGL-0x34004b5b00]GL Driver Message (OpenGL, Performance, GL_CLOSE_PATH_NV, High): GPU stall due to ReadPixels
[2024-09-21 13:34:01.636] [LOG] Create new calendarfetcher for url: http://p134-caldav.icloud.com/published/2/ODY3MDc3ODQxODY3MDc3OIsPCPqyTd7gfFTuhUgnU3E8veSROaMD9lC0bXMqbeTrcdUcRFgL2q0GROkcc6XtdbepSRYxUGbDtoDb3se2UkE - Interval: 604800000

sdetweil

@awwbaker i am on my phone, i can’t edit, and it wants to quote whole thing .

the os has changed the rules

i posted a response the other day to a topic that had some workarounds without coding changes

awwbaker

Dear Mr @sdetweil
Please see above, it seems “on-off” is throwing errors. It seems it is used by Remote-Control-Modules as well as Buttons. I wnet back and tried buttons. The error is below: Thank you very much. Anthony

[2024-09-22 11:34:50.557] [LOG] Launching application.
[2024-09-22 11:35:05.029] [ERROR] ERROR! Could not validate main module js file.
[2024-09-22 11:35:05.037] [ERROR] ReferenceError: Log is not defined
at Object. (/home/awwbaker/MagicMirror/modules/MMM-RAIN-MAP/MMM-RAIN-MAP.js:28:158622)
at Module._compile (node:internal/modules/cjs/loader:1373:14)
at Module._extensions…js (node:internal/modules/cjs/loader:1432:10)
at Module.load (node:internal/modules/cjs/loader:1215:32)
at Module._load (node:internal/modules/cjs/loader:1031:12)
at c._load (node:electron/js2c/node_init:2:17025)
at Module.require (node:internal/modules/cjs/loader:1240:19)
at require (node:internal/modules/helpers:179:18)
at Class.loadModuleDefaultConfig (/home/awwbaker/MagicMirror/modules/MMM-Remote-Control/node_helper.js:314:30)
at /home/awwbaker/MagicMirror/modules/MMM-Remote-Control/node_helper.js:268:26
at FSReqCallback.oncomplete (node:fs:198:5)
[2024-09-22 11:35:05.689] [INFO] System information:

SYSTEM: manufacturer: ; model: ; raspberry: undefined; virtual: false

OS: platform: linux; distro: Debian GNU/Linux; release: 12; arch: arm64; kernel: 6.6.47+rpt-rpi-v8

VERSIONS: electron: 31.1.0; used node: 20.14.0; installed node: 22.9.0; npm: 10.8.3; pm2:

OTHER: timeZone: America/New_York; ELECTRON_ENABLE_GPU: undefined

[2024-09-22 11:35:13.286] [LOG] Initialize button monitor_control on PIN 6
[2024-09-22 11:35:13.293] [ERROR] Whoops! There was an uncaught exception…
[2024-09-22 11:35:13.318] [ERROR] Error: EINVAL: invalid argument, write
at Object.writeFileSync (node:fs:2346:20)
at exportGpio (/home/awwbaker/MagicMirror/modules/MMM-Buttons/node_modules/onoff/onoff.js:18:8)
at new Gpio (/home/awwbaker/MagicMirror/modules/MMM-Buttons/node_modules/onoff/onoff.js:172:36)
at Class.intializeButton (/home/awwbaker/MagicMirror/modules/MMM-Buttons/node_helper.js:74:19)
at Class.intializeButtons (/home/awwbaker/MagicMirror/modules/MMM-Buttons/node_helper.js:90:18)
at Class.socketNotificationReceived (/home/awwbaker/MagicMirror/modules/MMM-Buttons/node_helper.js:26:18)
at Socket. (/home/awwbaker/MagicMirror/js/node_helper.js:98:11)
at Socket.emit (node:events:519:28)
at Socket.emitUntyped (/home/awwbaker/MagicMirror/node_modules/socket.io/dist/typed-events.js:69:22)
at /home/awwbaker/MagicMirror/node_modules/socket.io/dist/socket.js:704:39
at process.processTicksAndRejections (node:internal/process/task_queues:77:11) {
errno: -22,
code: ‘EINVAL’,
syscall: ‘write’
}
[2024-09-22 11:35:13.335]

sdetweil

@awwbaker yes as i posted before

errno: -22,
code: ‘EINVAL’,
syscall: ‘write’
}

the os has changed how this needs to be done
i posted a link to suggestions on how to resolve it without code changes

the Log not found is caused by the remotecontrol module

awwbaker

Thank you, I tried the pinctrl to no avail. Thank you though! Anthony

sdetweil

@awwbaker did you solve this?

awwbaker

@sdetweil Sorry have been on travel last several weeks. No I never did. I have the remote control module in and working just never could not get the button push. I have mmm-GroveGesture installed and working with sensor. Still working towards getting modules to hide and show. Could I ask another question???

What can/should I do on this?:

[2024-10-28 10:10:15.299] [ERROR] ERROR! Could not validate main module js file. 
[2024-10-28 10:10:15.528] [ERROR] ReferenceError: Log is not defined
    at Object.<anonymous> (/home/awwbaker/MagicMirror/modules/MMM-RAIN-MAP/MMM-RAIN-MAP.js:28:158622)
    at Module._compile (node:internal/modules/cjs/loader:1484:14)
    at Module._extensions..js (node:internal/modules/cjs/loader:1564:10)
    at Module.load (node:internal/modules/cjs/loader:1295:32)
    at Module._load (node:internal/modules/cjs/loader:1111:12)
    at c._load (node:electron/js2c/node_init:2:17025)
    at Module.require (node:internal/modules/cjs/loader:1318:19)
    at require (node:internal/modules/helpers:179:18)
    at Class.loadModuleDefaultConfig (/home/awwbaker/MagicMirror/modules/MMM-Remote-Control/node_helper.js:318:30)
    at /home/awwbaker/MagicMirror/modules/MMM-Remote-Control/node_helper.js:272:26
    at FSReqCallback.oncomplete (node:fs:198:5) 

----------------------------------------------------

sdetweil

@awwbaker remote control is loading the main js from other modules, but in the wrong runtime context.

i don’t know why it is doing that

awwbaker

@sdetweil ,
Hmmm…thanks Sam!!!

ChrisLeduex

Hi guys, I’ve been trying to figure this out too. I think I’m close with these two files using ‘pinctrl’ instead of ‘/sys/class/gpio/’ but I can’t figure out what I’m missing.

Based on the console log it looks like there’s an issue in my node_helper file, possible with the socketNotification functions because I’m not seeing any of my test messages.

And based on the log files there may be something missing from the package.json file because sometimes I get this error “Error: Cannot find module ‘node helper’ MODULE_NOT_FOUND” but other times I don’t. And I tried running this fix but couldn’t get it to work.
[https://forum.magicmirror.builders/user/jorickjuh](link url)

Other than that I’m not seeing any other errors and module does appear to be working but it’s just not processing any button presses. I’ll keep trying but I’ll post my progress so far on here in case someone can see what I’m missing.

test file:

Module.register("MMM-PinToggleTest", {
  defaults: {
    pin: 19,
    modulesToToggle: ["clock", "calendar"],
    interval: 1000
  },

//consol.log("MMM-PinToggleTest is starting...");

  start: function() {
    Log.info("MMM-PinToggleTest is starting, sending CONFIG...");
    consol.log("MMM-PinToggleTest is starting, sending CONFIG...");
    
    this.sendSocketNotification("CONFIG", {
      interval: this.config.interval,
      pin: this.config.pin
      });
    },

  start: function() {
    console.log("MMM-PinToggleTest started");
    this.previousPinState = null;

    // Request initial pin check from the helper
    this.sendSocketNotification("CONFIG", this.config);
  },

  socketNotificationReceived: function(notification, payload) {
    if (notification === "PIN_STATE") {
      const pinState = payload;
      console.log(`Received pin state: ${pinState}`);  // Log received state

      // Toggle modules based on pin state
      if (pinState !== this.previousPinState) {
        this.previousPinState = pinState;
        this.toggleModules(pinState === 1);
      }
    }
  },

  toggleModules: function(show) {
    console.log(`Toggling modules to ${show ? "show" : "hide"}`);
    this.config.modulesToToggle.forEach(moduleName => {
      const modules = MM.getModules().withClass(moduleName);
      modules.forEach(module => {
        if (show) {
          module.show(1000);  // Show module with fade-in effect
        } else {
          module.hide(1000);  // Hide module with fade-out effect
        }
      });
    });
  },
  

  getDom: function() {
    const wrapper = document.createElement("div");
    wrapper.innerHTML = "<small>MMM-PinToggleTest</small>";
    return wrapper;
  }
});

node_helper:

const NodeHelper = require("node_helper");
const exec = require("child_process").exec;
//const rpio = require("rpio");
//const Gpio = require("onoff").Gpio;

module.exports = NodeHelper.create({
  start: function() {
    console.log("node_helper for MMM-PinToggleTest has started.");  // Confirm helper initialization
    this.previousPinState = null;
    this.lastChangeTime = 0;
    this.debounceDelay = 200;
  },

  socketNotificationReceived: function(notification, payload) {
    if (notification === "CONFIG") {
      console.log("Received CONFIG in node_helper:", payload);  // Log receipt of configuration
      this.config = payload;
      this.schedulePinCheck();
    }
  },

  schedulePinCheck: function() {
    console.log(`Setting up pin check every ${this.config.interval} ms`); // Confirmation log
    setInterval(() => {
      this.checkPinState();
    }, this.config.interval);
  },

  checkPinState: function() {
    const pinNumber = this.config.pin;

    exec(`pinctrl ${pinNumber}`, (error, stdout, stderr) => {
      if (error) {
        console.error(`Error reading GPIO pin ${pinNumber}: ${stderr}`);
        return;
      }

      const pinState = parseInt(stdout.trim(), 10);
      const now = Date.now();

      console.log(`Current pin state for GPIO ${pinNumber}: ${pinState}`);

      if (pinState !== this.previousPinState && (now - this.lastChangeTime > this.debounceDelay)) {
        this.previousPinState = pinState;
        this.lastChangeTime = now;

        console.log(`Pin state changed to ${pinState} at ${new Date(now).toISOString()}`);
        this.sendSocketNotification("PIN_STATE", pinState);
        
        // Small delay to avoid multiple triggers
        //setTimeout(() => {}, 100);
      }
    });
  }
});

sdetweil

@ChrisLeduex well, you don’t have any source errors. altho you have 2 start: functions in the modulename.js

I see this as output of the pinctrl command on my pi 4

 pinctrl
 0: ip    pu | hi // ID_SDA/GPIO0 = input
 1: ip    pu | hi // ID_SCL/GPIO1 = input
 2: ip    pu | hi // GPIO2 = input
 3: ip    pu | hi // GPIO3 = input
 4: ip    pu | hi // GPIO4 = input
 5: ip    pu | hi // GPIO5 = input
 6: ip    pu | hi // GPIO6 = input
 7: ip    pu | hi // GPIO7 = input
 8: ip    pu | hi // GPIO8 = input
 9: ip    pd | lo // GPIO9 = input
10: ip    pd | lo // GPIO10 = input
11: ip    pd | lo // GPIO11 = input
12: ip    pd | lo // GPIO12 = input
13: ip    pd | lo // GPIO13 = input
14: ip    pn | hi // GPIO14 = input
15: ip    pu | hi // GPIO15 = input
16: ip    pd | lo // GPIO16 = input
17: ip    pd | lo // GPIO17 = input
18: ip    pd | lo // GPIO18 = input
19: ip    pd | lo // GPIO19 = input
20: ip    pd | lo // GPIO20 = input
21: ip    pd | lo // GPIO21 = input
22: ip    pd | lo // GPIO22 = input
23: ip    pd | lo // GPIO23 = input
24: ip    pd | lo // GPIO24 = input
25: ip    pd | lo // GPIO25 = input
26: ip    pd | lo // GPIO26 = input
27: ip    pd | lo // GPIO27 = input
28: a5    pu | hi // RGMII_MDIO/GPIO28 = RGMII_MDIO
29: a5    pd | lo // RGMIO_MDC/GPIO29 = RGMII_MDC
30: a3    pu | lo // CTS0/GPIO30 = CTS0
31: a3    pn | lo // RTS0/GPIO31 = RTS0
32: a3    pn | hi // TXD0/GPIO32 = TXD0
33: a3    pu | hi // RXD0/GPIO33 = RXD0
34: a3    pn | hi // SD1_CLK/GPIO34 = SD1_CLK
35: a3    pu | hi // SD1_CMD/GPIO35 = SD1_CMD
36: a3    pu | hi // SD1_DATA0/GPIO36 = SD1_DAT0
37: a3    pu | hi // SD1_DATA1/GPIO37 = SD1_DAT1
38: a3    pu | hi // SD1_DATA2/GPIO38 = SD1_DAT2
39: a3    pu | hi // SD1_DATA3/GPIO39 = SD1_DAT3
40: a0    pn | lo // PWM0_MISO/GPIO40 = PWM1_0
41: a0    pn | lo // PWM1_MOSI/GPIO41 = PWM1_1
42: op -- pu | lo // STATUS_LED_G_CLK/GPIO42 = output
43: ip    pu | hi // SPIFLASH_CE_N/GPIO43 = input
44: ip    pu | hi // SDA0/GPIO44 = input
45: ip    pu | hi // SCL0/GPIO45 = input
46: ip    pu | lo // RGMII_RXCLK/GPIO46 = input
47: ip    pu | lo // RGMII_RXCTL/GPIO47 = input
48: ip    pd | lo // RGMII_RXD0/GPIO48 = input
49: ip    pd | lo // RGMII_RXD1/GPIO49 = input
50: ip    pd | lo // RGMII_RXD2/GPIO50 = input
51: ip    pd | lo // RGMII_RXD3/GPIO51 = input
52: ip    pd | lo // RGMII_TXCLK/GPIO52 = input
53and : ip    pd | lo // RGMII_TXCTL/GPIO53 = input

and this for output of pinctrl 19

19: ip    pd | lo // GPIO19 = input

so the “pinctrl 19” command and parseInt(“19: ip pd | lo // GPIO19 = input”, 10);
will return 19

I think you meant pinctrl get 19, after sometime prior doing pinctrl set

pinctrl help
shows all it can do

ChrisLeduex

@sdetweil Thank you for catching those, too much copying and pasting.

Removed one of the start functions from the module.js file and also updated this line in the node_helper.js file so now it is returning the pin state instead of the pin number.
//const pinState = parseInt(stdout.trim(), 10);
const pinState = stdout.includes(“hi”) ? 1 : 0;

There still seems to be an issue somewhere in my node_helper.js file though because I’m still not seeing anything from that file in the console. Looking through the forum it seems node_helper file issues are common and I’ve tried implementing a few of the solutions I found there but still haven’t found the problem but I will keep trying. I suspect maybe I’m not nesting my socket notifications correctly.

PinToggleTest.js

Module.register("MMM-PinToggleTest", {
  defaults: {
    pin: 19,
    modulesToToggle: ["clock", "calendar"],
    interval: 1000
  },

  start: function() {
    console.log("MMM-PinToggleTest started");
    Log.info("MMM-PinToggleTest is starting, sending CONFIG...");
    this.previousPinState = null;

    // Request initial pin check from the helper
    this.sendSocketNotification("CONFIG", this.config);
  },
  
  socketNotificationReceived: function(notification, payload) {
		if (notification === 'STARTED') {
    console.log("STARTED notification received from node_helper");
    this.config.text = 'Started';
    this.updateDom();
		}
	},

  socketNotificationReceived: function(notification, payload) {
    if (notification === "PIN_STATE") {
      const pinState = payload;
      console.log(`Received pin state: ${pinState}`);  // Log received state

      // Toggle modules based on pin state
      if (pinState !== this.previousPinState) {
        this.previousPinState = pinState;
        this.toggleModules(pinState === 1);
      }
    }
  },

  toggleModules: function(show) {
    console.log(`Toggling modules to ${show ? "show" : "hide"}`);
    this.config.modulesToToggle.forEach(moduleName => {
      const modules = MM.getModules().withClass(moduleName);
      modules.forEach(module => {
        if (show) {
          module.show(1000);  // Show module with fade-in effect
        } else {
          module.hide(1000);  // Hide module with fade-out effect
        }
      });
    });
  },

  getDom: function() {
    const wrapper = document.createElement("div");
    wrapper.innerHTML = "<small>MMM-PinToggleTest</small>";
    return wrapper;
  }
});

node_helper.js

const NodeHelper = require("node_helper");
const exec = require("child_process").exec;
//const rpio = require("rpio");
//const Gpio = require("onoff").Gpio;

//module.exports = NodeHelper.create({
//  start: function() {
//    console.log("Starting node_helper for MMM-PinToggleTest");
//    this.previousPinState = null;
//    this.config = null;
//  },

module.exports = NodeHelper.create({
  start() {
    this.started = false;
  },

  socketNotificationReceived: function(notification, payload) {
    if (notification === "CONFIG" && !this.started) {
      const self = this;
      console.log("CONFIG notification received");
      this.config = payload;
      this.schedulePinCheck();
      this.sendSocketNotification('STARTED', {message: 'test'});
      console.log("STARTED notification sent back to front end");
    }
  },

  schedulePinCheck: function() {
    console.log(`Setting up pin check every ${this.config.interval} ms`);
    setInterval(() => {
      this.checkPinState();
    }, this.config.interval);
  },

  checkPinState: function() {
    const pinNumber = this.config.pin;

    // Execute pinctrl command
    exec(`pinctrl get ${pinNumber}`, (error, stdout, stderr) => {
      if (error) {
        console.error(`Error reading GPIO pin ${pinNumber}: ${stderr}`);
        return;
      }

      //const pinState = parseInt(stdout.trim(), 10);
      const pinState = stdout.includes("hi") ? 1 : 0;
      console.log(`Detected pin state for pin ${pinNumber}: ${pinState}`);  // Log the detected state

      // Only send if state has changed
        if (pinState !== this.previousPinState) {
        this.previousPinState = pinState;
        console.log(`Pin state changed to ${pinState}`);
        this.sendSocketNotification("PIN_STATE", pinState);
        
        // Small delay to avoid multiple triggers
        setTimeout(() => {}, 100);
      }
    });
  }
});

sdetweil

@ChrisLeduex I see this from the output of npm start

[2024-11-05 12:32:28.225] [LOG]   Current pin state for GPIO 19: 1 
[2024-11-05 12:32:28.225] [LOG]   Pin state changed to 1 at 2024-11-05T18:32:28.224Z 
[2024-11-05 12:32:28.244] [INFO]  [MMM-MealieMenu] Week starts: 2024-11-04, next week starts: 2024-11-11 
[2024-11-05 12:32:28.375] [INFO]  Mealie error={} 
[2024-11-05 12:32:28.400] [INFO]  Newsfeed-Fetcher: Broadcasting 15 items. 
[2024-11-05 12:32:28.413] [INFO]  Newsfeed-Fetcher: Broadcasting 22 items. 
[2024-11-05 12:32:28.819] [INFO]  Newsfeed-Fetcher: reloadInterval set to ttl=5400000 for url http://www.tagesschau.de/xml/rss2 
[2024-11-05 12:32:28.847] [INFO]  Newsfeed-Fetcher: Broadcasting 40 items. 
[2024-11-05 12:32:29.225] [LOG]   Current pin state for GPIO 19: 1 
[2024-11-05 12:32:30.225] [LOG]   Current pin state for GPIO 19: 1 
[2024-11-05 12:32:31.225] [LOG]   Current pin state for GPIO 19: 1 
[2024-11-05 12:32:32.225] [LOG]   Current pin state for GPIO 19: 1 
[2024-11-05 12:32:33.224] [LOG]   Current pin state for GPIO 19: 1 
[2024-11-05 12:32:34.225] [LOG]   Current pin state for GPIO 19: 1 
[2024-11-05 12:32:35.226] [LOG]   Current pin state for GPIO 19: 1 
[2024-11-05 12:32:36.227] [LOG]   Current pin state for GPIO 19: 1 
[2024-11-05 12:32:37.229] [LOG]   Current pin state for GPIO 19: 1 
[2024-11-05 12:32:38.227] [LOG]   Current pin state for GPIO 19: 1

I wrote a little pinctrl script that just outputs 1

#!/bin/bash
echo 1

as pinctrl is not on my linux desktop

ChrisLeduex

@sdetweil Ah yes, I forgot I have a python script I was kicking off manually that I forgot to run before testing those fixes. It is working now and both files are communicating with each other, thank you.

My next step is to see if I can get this working with the MMM-Buttons/MMM-ModuleToggleButton modules.

sdetweil

@ChrisLeduex buttons is interrupt driven, but can be changed to polling like you are doing

ChrisLeduex

@sdetweil Yeah you’re right, that one might be more difficult. But I do have MMM-ModuleToggleButton working with pinctrl. Here’s the updated node_helper.js file just in case anyone’s interested.

node_helper.js

const NodeHelper = require('node_helper'); // eslint-disable-line import/no-extraneous-dependencies
//const Gpio = require('onoff').Gpio;
const { exec } = require("child_process");

module.exports = NodeHelper.create({
  start() {
    this.started = false;
  },

  socketNotificationReceived(notification, payload) {
    if (notification === 'TOGGLE_BUTTON_CONFIG' && !this.started) {
      const self = this;
      this.config = payload;

      //const button = new Gpio(this.config.buttonGpioPin, 'in', 'both', { persistentWatch: true, debounceTimeout: this.config.debounceTimeoutInMilliseconds });
      //button.watch((err, state) => {
      //  if (state === 1) {
      //    self.sendSocketNotification(self.config.notificationName, true);
      //  }
      //});

      //this.started = true;
      
      // Set up GPIO as input using pinctrl command
      const pin = this.config.buttonGpioPin;
      const debounceTimeout = this.config.debounceTimeoutInMilliseconds;
      const notificationName = this.config.notificationName;
      let lastState = null;

      // Function to read the pin state using pinctrl
      const checkPinState = () => {
      exec(`pinctrl get ${pin}`, (err, stdout, stderr) => {
        if (err) {
          console.error(`Error reading GPIO state: ${err.message}`);
          return;
        }
       
        // Parse the pin state from stdout
        const state = stdout.includes("hi") ? 1 : 0;

        // Handle state change with debounce
        if (state !== lastState && state === 1) {
          this.sendSocketNotification(notificationName, true);
        }
       
        // Update last state
        lastState = state;
      });
      };

    // Set up an interval to check the pin state with debounce
    setInterval(checkPinState, debounceTimeout || 100); // Defaults to 100ms if debounce is not defined
      
    }
  }
});