MMM-FRITZ-Box-Callmonitor-py3 unknown_error

[rkorell]

@wuermchen
Hi.
I guess it SHOULD work - at least it works for me at current github status (approx. 2-3 old - not sure what you have archived).
At my own initial setup I got the same error message and after some researches it was caused by refused authentication on the fritzbox side.

So I would start at this point initially - not at module side.
My first attempt was login without password (as possible for console) - this doesn’t work.
I’ve created a separate user on AVM side with full access to phonebook and so on and this worked from scratch.
I see that you have an explicite user/pw as well - so I would double check if this user exists on AVM side and do have the right access privileges.

For being sure I would recommend to delete all parameters from configuration you do not really need and experiment with the base parameters.
E.g. you have set the Port number - at default - I would delete this one.

I’m not sure if you are aware but you can find the documentation of the module in your module folder as well - you do not need the - closed - github entry.
“README.md” is the file.

Good luck!
Ralf

[KristjanESPERANTO]

@sdetweil said in MMM-FRITZ-Box-Callmonitor-py3 unknown_error:

i do not know how the module works but i suspect this
https://forum.magicmirror.builders/post/123380

Where do you see the connection? The maintainer of MMM-FRITZ-Box-Callmonitor-py3 is drtorchwood.

[sdetweil]

@KristjanESPERANTO bad post, didn’t check source, he had one too

[wuermchen]

• I tried a new config with default values, without success
• Reinstalling and turning off the other modules, without success

{
		module: 'MMM-FRITZ-Box-Callmonitor-py3',
		position: 'top_right',
		header: "Recent calls",
		config: {
			password: "pass",
			username: "user",
			fritzIP: "192.168.188.1",
			showContactsStatus: true,
			vCard: false
		}
	},

npm start has errors

pi@raspberrypi:~/MagicMirror $ npm start

> magicmirror@2.30.0 start
> npm run start:x11


> magicmirror@2.30.0 start:x11
> DISPLAY="${DISPLAY:=:0}" ./node_modules/.bin/electron js/electron.js

[2025-01-31 18:47:25.363] [LOG]   Starting MagicMirror: v2.30.0
[2025-01-31 18:47:25.394] [LOG]   Loading config ...
[2025-01-31 18:47:25.398] [LOG]   config template file not exists, no envsubst
[2025-01-31 18:47:26.001] [INFO]  Checking config file /home/pi/MagicMirror/config/config.js ...
[2025-01-31 18:47:26.140] [INFO]  Your configuration file doesn't contain syntax errors :)
[2025-01-31 18:47:26.142] [INFO]  Checking modules structure configuration ...
[2025-01-31 18:47:26.269] [INFO]  Your modules structure configuration doesn't contain errors :)
[2025-01-31 18:47:26.272] [LOG]   Loading module helpers ...
[2025-01-31 18:47:26.275] [LOG]   No helper found for module: alert.
[2025-01-31 18:47:26.283] [LOG]   Initializing new module helper ...
[2025-01-31 18:47:26.284] [LOG]   Module helper loaded: updatenotification
[2025-01-31 18:47:26.285] [LOG]   No helper found for module: clock.
[2025-01-31 18:47:26.286] [LOG]   No helper found for module: compliments.
[2025-01-31 18:47:26.461] [LOG]   Initializing new module helper ...
[2025-01-31 18:47:26.462] [LOG]   Module helper loaded: MMM-FRITZ-Box-Callmonitor-py3
[2025-01-31 18:47:26.463] [LOG]   All module helpers loaded.
[2025-01-31 18:47:26.473] [LOG]   Starting server on port 8080 ...
[2025-01-31 18:47:27.320] [LOG]   Server started ...
[2025-01-31 18:47:27.322] [LOG]   Connecting socket for: updatenotification
[2025-01-31 18:47:27.324] [LOG]   Starting module helper: updatenotification
[2025-01-31 18:47:27.325] [LOG]   Connecting socket for: MMM-FRITZ-Box-Callmonitor-py3
[2025-01-31 18:47:27.327] [LOG]   Starting module: MMM-FRITZ-Box-Callmonitor-py3
[2025-01-31 18:47:27.329] [LOG]   Sockets connected & modules started ...
[2025-01-31 18:47:28.262] [LOG]   Launching application.
[2025-01-31 18:47:29.866] [INFO]  System information:
### SYSTEM:   manufacturer: Raspberry Pi Foundation; model: Raspberry Pi 4 Model B Rev 1.1; virtual: false
### OS:       platform: linux; distro: Debian GNU/Linux; release: 12; arch: arm64; kernel: 6.6.62+rpt-rpi-v8
### VERSIONS: electron: 34.0.2; used node: 20.18.1; installed node: 20.18.1; npm: 10.9.2; pm2: 5.4.3
### OTHER:    timeZone: Europe/Berlin; ELECTRON_ENABLE_GPU: undefined
[96922:0131/184730.026384:ERROR:gbm_wrapper.cc(79)] Failed to get fd for plane.: Datei oder Verzeichnis nicht gefunden (2)
[96922:0131/184730.026830:ERROR:gbm_wrapper.cc(262)] Failed to export buffer to dma_buf: Datei oder Verzeichnis nicht gefunden (2)
[96922:0131/184730.027196:ERROR:gbm_wrapper.cc(79)] Failed to get fd for plane.: Datei oder Verzeichnis nicht gefunden (2)
[96922:0131/184730.027321:ERROR:gbm_wrapper.cc(262)] Failed to export buffer to dma_buf: Datei oder Verzeichnis nicht gefunden (2)
[96922:0131/184730.027499:ERROR:gbm_wrapper.cc(79)] Failed to get fd for plane.: Datei oder Verzeichnis nicht gefunden (2)
[96922:0131/184730.027625:ERROR:gbm_wrapper.cc(262)] Failed to export buffer to dma_buf: Datei oder Verzeichnis nicht gefunden (2)
[96922:0131/184730.027798:ERROR:gbm_wrapper.cc(79)] Failed to get fd for plane.: Datei oder Verzeichnis nicht gefunden (2)
[96922:0131/184730.027902:ERROR:gbm_wrapper.cc(262)] Failed to export buffer to dma_buf: Datei oder Verzeichnis nicht gefunden (2)
[96922:0131/184730.028061:ERROR:gbm_wrapper.cc(79)] Failed to get fd for plane.: Datei oder Verzeichnis nicht gefunden (2)
[96922:0131/184730.028171:ERROR:gbm_wrapper.cc(262)] Failed to export buffer to dma_buf: Datei oder Verzeichnis nicht gefunden (2)
[96922:0131/184730.028341:ERROR:gbm_wrapper.cc(79)] Failed to get fd for plane.: Datei oder Verzeichnis nicht gefunden (2)
[96922:0131/184730.028445:ERROR:gbm_wrapper.cc(262)] Failed to export buffer to dma_buf: Datei oder Verzeichnis nicht gefunden (2)
[96922:0131/184730.028602:ERROR:gbm_wrapper.cc(79)] Failed to get fd for plane.: Datei oder Verzeichnis nicht gefunden (2)
[96922:0131/184730.028704:ERROR:gbm_wrapper.cc(262)] Failed to export buffer to dma_buf: Datei oder Verzeichnis nicht gefunden (2)
[96922:0131/184730.030069:ERROR:gbm_wrapper.cc(79)] Failed to get fd for plane.: Datei oder Verzeichnis nicht gefunden (2)
[96922:0131/184730.030275:ERROR:gbm_wrapper.cc(262)] Failed to export buffer to dma_buf: Datei oder Verzeichnis nicht gefunden (2)
[96922:0131/184730.030478:ERROR:gbm_wrapper.cc(79)] Failed to get fd for plane.: Datei oder Verzeichnis nicht gefunden (2)
[96922:0131/184730.030618:ERROR:gbm_wrapper.cc(262)] Failed to export buffer to dma_buf: Datei oder Verzeichnis nicht gefunden (2)
[96922:0131/184730.030807:ERROR:gbm_wrapper.cc(79)] Failed to get fd for plane.: Datei oder Verzeichnis nicht gefunden (2)
[96922:0131/184730.030950:ERROR:gbm_wrapper.cc(262)] Failed to export buffer to dma_buf: Datei oder Verzeichnis nicht gefunden (2)
[96922:0131/184730.031137:ERROR:gbm_wrapper.cc(79)] Failed to get fd for plane.: Datei oder Verzeichnis nicht gefunden (2)
[96922:0131/184730.031248:ERROR:gbm_wrapper.cc(262)] Failed to export buffer to dma_buf: Datei oder Verzeichnis nicht gefunden (2)
[96922:0131/184730.031471:ERROR:gbm_wrapper.cc(79)] Failed to get fd for plane.: Datei oder Verzeichnis nicht gefunden (2)
[96922:0131/184730.031751:ERROR:gbm_wrapper.cc(262)] Failed to export buffer to dma_buf: Datei oder Verzeichnis nicht gefunden (2)
[96922:0131/184730.031946:ERROR:gbm_wrapper.cc(79)] Failed to get fd for plane.: Datei oder Verzeichnis nicht gefunden (2)
[96922:0131/184730.032053:ERROR:gbm_wrapper.cc(262)] Failed to export buffer to dma_buf: Datei oder Verzeichnis nicht gefunden (2)
[96922:0131/184730.032219:ERROR:gbm_wrapper.cc(79)] Failed to get fd for plane.: Datei oder Verzeichnis nicht gefunden (2)
[96922:0131/184730.032326:ERROR:gbm_wrapper.cc(262)] Failed to export buffer to dma_buf: Datei oder Verzeichnis nicht gefunden (2)
[2025-01-31 18:47:31.626] [LOG]   Received config for MMM-FRITZ-Box-Callmonitor-py3
[2025-01-31 18:47:31.631] [LOG]   MMM-FRITZ-Box-Callmonitor-py3 is waiting for incoming calls.
[2025-01-31 18:47:31.680] [INFO]  updatenotification: Updater Class Loaded!
[2025-01-31 18:47:31.682] [INFO]  updatenotification: Checking PM2 using...
[2025-01-31 18:47:31.684] [INFO]  updatenotification: [PM2] You are not using pm2
[2025-01-31 18:47:31.689] [INFO]  Checking git for module: MMM-FRITZ-Box-Callmonitor-py3
[2025-01-31 18:47:31.730] [INFO]  Checking git for module: MagicMirror
:ERROR:gbm_wrapper.cc(79)] Failed to get fd for plane.: Datei oder Verzeichnis nicht gefunden (2)
[2025-01-31 18:48:11.502] [INFO]  updatenotification: Updater Class Loaded!
[2025-01-31 18:48:11.503] [INFO]  updatenotification: Checking PM2 using...
[2025-01-31 18:48:11.503] [INFO]  updatenotification: [PM2] You are not using pm2

[rkorell]

@wuermchen
The log info from MMM-FRITZ-Box-Callmonitor seems to be O.K. …
Regards,
Ralf

[wuermchen]

I reinstalled Fritzcallmonitor. The error still exists.
During installation there were changes compared to the template:

python-dev = Doch die folgenden Pakete ersetzen es: python-dev-is-python3

sudo pip install fritzconnection  error: externally-managed-environment   sudo pipx install fritzconnection

Does anyone have any idea what I’m doing wrong?

[sdetweil]

@wuermchen does the pip setup require a virtual environment?
which you have to enable again before launching MagicMirror

[wuermchen]

I installed pipx before and then “sudo pipx install fritzconnection” so I don’t need a virtual environment

[sdetweil]

@wuermchen yes, but it failed

[wuermchen]

When I try to reinstall fritzconnection I get the following message:

'fritzconnection' already seems to be installed. Not modifying existing
installation in '/root/.local/pipx/venvs/fritzconnection'. Pass '--force' to
force installation.