Read the statement by Michael Teeuw here.
MMM-FRITZ-Box-Callmonitor-py3 unknown_error
-
@wuermchen
Hi.
I guess it SHOULD work - at least it works for me at current github status (approx. 2-3 old - not sure what you have archived).
At my own initial setup I got the same error message and after some researches it was caused by refused authentication on the fritzbox side.So I would start at this point initially - not at module side.
My first attempt was login without password (as possible for console) - this doesn’t work.
I’ve created a separate user on AVM side with full access to phonebook and so on and this worked from scratch.
I see that you have an explicite user/pw as well - so I would double check if this user exists on AVM side and do have the right access privileges.For being sure I would recommend to delete all parameters from configuration you do not really need and experiment with the base parameters.
E.g. you have set the Port number - at default - I would delete this one.I’m not sure if you are aware but you can find the documentation of the module in your module folder as well - you do not need the - closed - github entry.
“README.md” is the file.Good luck!
Ralf -
@sdetweil said in MMM-FRITZ-Box-Callmonitor-py3 unknown_error:
i do not know how the module works but i suspect this
https://forum.magicmirror.builders/post/123380Where do you see the connection? The maintainer of MMM-FRITZ-Box-Callmonitor-py3 is drtorchwood.
-
@KristjanESPERANTO bad post, didn’t check source, he had one too
-
- I tried a new config with default values, without success
- Reinstalling and turning off the other modules, without success
{ module: 'MMM-FRITZ-Box-Callmonitor-py3', position: 'top_right', header: "Recent calls", config: { password: "pass", username: "user", fritzIP: "192.168.188.1", showContactsStatus: true, vCard: false } },npm start has errors
pi@raspberrypi:~/MagicMirror $ npm start > magicmirror@2.30.0 start > npm run start:x11 > magicmirror@2.30.0 start:x11 > DISPLAY="${DISPLAY:=:0}" ./node_modules/.bin/electron js/electron.js [2025-01-31 18:47:25.363] [LOG] Starting MagicMirror: v2.30.0 [2025-01-31 18:47:25.394] [LOG] Loading config ... [2025-01-31 18:47:25.398] [LOG] config template file not exists, no envsubst [2025-01-31 18:47:26.001] [INFO] Checking config file /home/pi/MagicMirror/config/config.js ... [2025-01-31 18:47:26.140] [INFO] Your configuration file doesn't contain syntax errors :) [2025-01-31 18:47:26.142] [INFO] Checking modules structure configuration ... [2025-01-31 18:47:26.269] [INFO] Your modules structure configuration doesn't contain errors :) [2025-01-31 18:47:26.272] [LOG] Loading module helpers ... [2025-01-31 18:47:26.275] [LOG] No helper found for module: alert. [2025-01-31 18:47:26.283] [LOG] Initializing new module helper ... [2025-01-31 18:47:26.284] [LOG] Module helper loaded: updatenotification [2025-01-31 18:47:26.285] [LOG] No helper found for module: clock. [2025-01-31 18:47:26.286] [LOG] No helper found for module: compliments. [2025-01-31 18:47:26.461] [LOG] Initializing new module helper ... [2025-01-31 18:47:26.462] [LOG] Module helper loaded: MMM-FRITZ-Box-Callmonitor-py3 [2025-01-31 18:47:26.463] [LOG] All module helpers loaded. [2025-01-31 18:47:26.473] [LOG] Starting server on port 8080 ... [2025-01-31 18:47:27.320] [LOG] Server started ... [2025-01-31 18:47:27.322] [LOG] Connecting socket for: updatenotification [2025-01-31 18:47:27.324] [LOG] Starting module helper: updatenotification [2025-01-31 18:47:27.325] [LOG] Connecting socket for: MMM-FRITZ-Box-Callmonitor-py3 [2025-01-31 18:47:27.327] [LOG] Starting module: MMM-FRITZ-Box-Callmonitor-py3 [2025-01-31 18:47:27.329] [LOG] Sockets connected & modules started ... [2025-01-31 18:47:28.262] [LOG] Launching application. [2025-01-31 18:47:29.866] [INFO] System information: ### SYSTEM: manufacturer: Raspberry Pi Foundation; model: Raspberry Pi 4 Model B Rev 1.1; virtual: false ### OS: platform: linux; distro: Debian GNU/Linux; release: 12; arch: arm64; kernel: 6.6.62+rpt-rpi-v8 ### VERSIONS: electron: 34.0.2; used node: 20.18.1; installed node: 20.18.1; npm: 10.9.2; pm2: 5.4.3 ### OTHER: timeZone: Europe/Berlin; ELECTRON_ENABLE_GPU: undefined [96922:0131/184730.026384:ERROR:gbm_wrapper.cc(79)] Failed to get fd for plane.: Datei oder Verzeichnis nicht gefunden (2) [96922:0131/184730.026830:ERROR:gbm_wrapper.cc(262)] Failed to export buffer to dma_buf: Datei oder Verzeichnis nicht gefunden (2) [96922:0131/184730.027196:ERROR:gbm_wrapper.cc(79)] Failed to get fd for plane.: Datei oder Verzeichnis nicht gefunden (2) [96922:0131/184730.027321:ERROR:gbm_wrapper.cc(262)] Failed to export buffer to dma_buf: Datei oder Verzeichnis nicht gefunden (2) [96922:0131/184730.027499:ERROR:gbm_wrapper.cc(79)] Failed to get fd for plane.: Datei oder Verzeichnis nicht gefunden (2) [96922:0131/184730.027625:ERROR:gbm_wrapper.cc(262)] Failed to export buffer to dma_buf: Datei oder Verzeichnis nicht gefunden (2) [96922:0131/184730.027798:ERROR:gbm_wrapper.cc(79)] Failed to get fd for plane.: Datei oder Verzeichnis nicht gefunden (2) [96922:0131/184730.027902:ERROR:gbm_wrapper.cc(262)] Failed to export buffer to dma_buf: Datei oder Verzeichnis nicht gefunden (2) [96922:0131/184730.028061:ERROR:gbm_wrapper.cc(79)] Failed to get fd for plane.: Datei oder Verzeichnis nicht gefunden (2) [96922:0131/184730.028171:ERROR:gbm_wrapper.cc(262)] Failed to export buffer to dma_buf: Datei oder Verzeichnis nicht gefunden (2) [96922:0131/184730.028341:ERROR:gbm_wrapper.cc(79)] Failed to get fd for plane.: Datei oder Verzeichnis nicht gefunden (2) [96922:0131/184730.028445:ERROR:gbm_wrapper.cc(262)] Failed to export buffer to dma_buf: Datei oder Verzeichnis nicht gefunden (2) [96922:0131/184730.028602:ERROR:gbm_wrapper.cc(79)] Failed to get fd for plane.: Datei oder Verzeichnis nicht gefunden (2) [96922:0131/184730.028704:ERROR:gbm_wrapper.cc(262)] Failed to export buffer to dma_buf: Datei oder Verzeichnis nicht gefunden (2) [96922:0131/184730.030069:ERROR:gbm_wrapper.cc(79)] Failed to get fd for plane.: Datei oder Verzeichnis nicht gefunden (2) [96922:0131/184730.030275:ERROR:gbm_wrapper.cc(262)] Failed to export buffer to dma_buf: Datei oder Verzeichnis nicht gefunden (2) [96922:0131/184730.030478:ERROR:gbm_wrapper.cc(79)] Failed to get fd for plane.: Datei oder Verzeichnis nicht gefunden (2) [96922:0131/184730.030618:ERROR:gbm_wrapper.cc(262)] Failed to export buffer to dma_buf: Datei oder Verzeichnis nicht gefunden (2) [96922:0131/184730.030807:ERROR:gbm_wrapper.cc(79)] Failed to get fd for plane.: Datei oder Verzeichnis nicht gefunden (2) [96922:0131/184730.030950:ERROR:gbm_wrapper.cc(262)] Failed to export buffer to dma_buf: Datei oder Verzeichnis nicht gefunden (2) [96922:0131/184730.031137:ERROR:gbm_wrapper.cc(79)] Failed to get fd for plane.: Datei oder Verzeichnis nicht gefunden (2) [96922:0131/184730.031248:ERROR:gbm_wrapper.cc(262)] Failed to export buffer to dma_buf: Datei oder Verzeichnis nicht gefunden (2) [96922:0131/184730.031471:ERROR:gbm_wrapper.cc(79)] Failed to get fd for plane.: Datei oder Verzeichnis nicht gefunden (2) [96922:0131/184730.031751:ERROR:gbm_wrapper.cc(262)] Failed to export buffer to dma_buf: Datei oder Verzeichnis nicht gefunden (2) [96922:0131/184730.031946:ERROR:gbm_wrapper.cc(79)] Failed to get fd for plane.: Datei oder Verzeichnis nicht gefunden (2) [96922:0131/184730.032053:ERROR:gbm_wrapper.cc(262)] Failed to export buffer to dma_buf: Datei oder Verzeichnis nicht gefunden (2) [96922:0131/184730.032219:ERROR:gbm_wrapper.cc(79)] Failed to get fd for plane.: Datei oder Verzeichnis nicht gefunden (2) [96922:0131/184730.032326:ERROR:gbm_wrapper.cc(262)] Failed to export buffer to dma_buf: Datei oder Verzeichnis nicht gefunden (2) [2025-01-31 18:47:31.626] [LOG] Received config for MMM-FRITZ-Box-Callmonitor-py3 [2025-01-31 18:47:31.631] [LOG] MMM-FRITZ-Box-Callmonitor-py3 is waiting for incoming calls. [2025-01-31 18:47:31.680] [INFO] updatenotification: Updater Class Loaded! [2025-01-31 18:47:31.682] [INFO] updatenotification: Checking PM2 using... [2025-01-31 18:47:31.684] [INFO] updatenotification: [PM2] You are not using pm2 [2025-01-31 18:47:31.689] [INFO] Checking git for module: MMM-FRITZ-Box-Callmonitor-py3 [2025-01-31 18:47:31.730] [INFO] Checking git for module: MagicMirror :ERROR:gbm_wrapper.cc(79)] Failed to get fd for plane.: Datei oder Verzeichnis nicht gefunden (2) [2025-01-31 18:48:11.502] [INFO] updatenotification: Updater Class Loaded! [2025-01-31 18:48:11.503] [INFO] updatenotification: Checking PM2 using... [2025-01-31 18:48:11.503] [INFO] updatenotification: [PM2] You are not using pm2 -
@wuermchen
The log info from MMM-FRITZ-Box-Callmonitor seems to be O.K. …
Regards,
Ralf -
I reinstalled Fritzcallmonitor. The error still exists.
During installation there were changes compared to the template:python-dev = Doch die folgenden Pakete ersetzen es: python-dev-is-python3 sudo pip install fritzconnection error: externally-managed-environment sudo pipx install fritzconnectionDoes anyone have any idea what I’m doing wrong?
-
@wuermchen does the pip setup require a virtual environment?
which you have to enable again before launching MagicMirror -
I installed pipx before and then “sudo pipx install fritzconnection” so I don’t need a virtual environment
-
@wuermchen yes, but it failed
-
When I try to reinstall fritzconnection I get the following message:
'fritzconnection' already seems to be installed. Not modifying existing installation in '/root/.local/pipx/venvs/fritzconnection'. Pass '--force' to force installation.
