Read the statement by Michael Teeuw here.
Netatmo module will not shown
-
@sdetweil
Thank you. I installed MM using the proxmox helpers script. When I restart MM, it always starts automaticallylook please…can you see what:
root@magicmirror-live:/opt/magicmirror# npm run server > magicmirror@2.31.0 server > node ./serveronly [2025-04-25 19:25:22.927] [LOG] Starting MagicMirror: v2.31.0 [2025-04-25 19:25:22.939] [LOG] Loading config ... [2025-04-25 19:25:22.940] [LOG] config template file not exists, no envsubst [2025-04-25 19:25:23.250] [INFO] Checking config file /opt/magicmirror/config/config.js ... [2025-04-25 19:25:23.343] [INFO] Your configuration file doesn't contain syntax errors :) [2025-04-25 19:25:23.344] [INFO] Checking modules structure configuration ... [2025-04-25 19:25:23.398] [INFO] Your modules structure configuration doesn't contain errors :) [2025-04-25 19:25:23.787] [LOG] Loading module helpers ... [2025-04-25 19:25:23.797] [LOG] No helper found for module: alert. [2025-04-25 19:25:23.814] [LOG] Initializing new module helper ... [2025-04-25 19:25:23.822] [LOG] Module helper loaded: updatenotification [2025-04-25 19:25:23.822] [LOG] No helper found for module: clock. [2025-04-25 19:25:24.047] [LOG] Initializing new module helper ... [2025-04-25 19:25:24.047] [LOG] Module helper loaded: calendar [2025-04-25 19:25:24.048] [LOG] No helper found for module: compliments. [2025-04-25 19:25:24.048] [LOG] No helper found for module: MMM-OpenmapWeather. [2025-04-25 19:25:24.052] [LOG] Initializing new module helper ... [2025-04-25 19:25:24.052] [LOG] Module helper loaded: netatmo [2025-04-25 19:25:24.053] [WARN] No /opt/magicmirror/modules/MMM-OpenWeatherForecast/MMM-OpenWeatherForecast.js found for module: MMM-OpenWeatherForecast. [2025-04-25 19:25:24.053] [LOG] No helper found for module: MMM-OpenWeatherForecast. [2025-04-25 19:25:24.053] [LOG] No helper found for module: MMM-Blitzer. [2025-04-25 19:25:24.250] [LOG] Initializing new module helper ... [2025-04-25 19:25:24.251] [LOG] Module helper loaded: MMM-F1 [2025-04-25 19:25:24.252] [LOG] Initializing new module helper ... [2025-04-25 19:25:24.252] [LOG] Module helper loaded: MMM-ApothekenNotdienst [2025-04-25 19:25:24.253] [LOG] Initializing new module helper ... [2025-04-25 19:25:24.253] [LOG] Module helper loaded: MMM-ioBroker [2025-04-25 19:25:24.253] [LOG] No helper found for module: MMM-Carousel. [2025-04-25 19:25:24.256] [LOG] Initializing new module helper ... [2025-04-25 19:25:24.263] [LOG] Module helper loaded: MMM-PublicTransportHafas [2025-04-25 19:25:24.464] [LOG] Initializing new module helper ... [2025-04-25 19:25:24.465] [LOG] Module helper loaded: MMM-RNV [2025-04-25 19:25:24.465] [LOG] Initializing new module helper ... [2025-04-25 19:25:24.466] [LOG] Check MagicMirror² version for node helper 'MMM-Fuel' - Minimum version: 2.15.0 - Current version: 2.31.0 [2025-04-25 19:25:24.466] [LOG] Version is ok! [2025-04-25 19:25:24.466] [LOG] Module helper loaded: MMM-Fuel [2025-04-25 19:25:24.494] [LOG] Initializing new module helper ... [2025-04-25 19:25:24.495] [LOG] Module helper loaded: MMM-Remote-Control [2025-04-25 19:25:24.544] [LOG] Initializing new module helper ... [2025-04-25 19:25:24.545] [LOG] Module helper loaded: newsfeed [2025-04-25 19:25:24.545] [LOG] All module helpers loaded. [2025-04-25 19:25:24.549] [LOG] Starting server on port 8080 ... [2025-04-25 19:25:24.550] [WARN] You're using a full whitelist configuration to allow for all IPs [2025-04-25 19:25:24.561] [ERROR] Whoops! There was an uncaught exception... [2025-04-25 19:25:24.561] [ERROR] Error: listen EADDRINUSE: address already in use 0.0.0.0:8080 at Server.setupListenHandle [as _listen2] (node:net:1939:16) at listenInCluster (node:net:1996:12) at node:net:2205:7 at process.processTicksAndRejections (node:internal/process/task_queues:90:21) { code: 'EADDRINUSE', errno: -98, syscall: 'listen', address: '0.0.0.0', port: 8080 } [2025-04-25 19:25:24.561] [ERROR] MagicMirror² will not quit, but it might be a good idea to check why this happened. Maybe no internet connection? [2025-04-25 19:25:24.561] [ERROR] If you think this really is an issue, please open an issue on GitHub: https://github.com/MagicMirrorOrg/MagicMirror/issues [2025-04-25 19:25:24.648] [INFO] System information: ### SYSTEM: manufacturer: ; model: ; virtual: false ### OS: platform: linux; distro: Debian GNU/Linux; release: 12; arch: x64; kernel: 6.8.12-8-pve ### VERSIONS: electron: undefined; used node: 22.15.0; installed node: 22.15.0; npm: 10.9.2; pm2: 5.4.3 ### OTHER: timeZone: Europe/Berlin; ELECTRON_ENABLE_GPU: undefined -
@kusselin netatmo is not in the module list
also the address already in use means the server is running already from whatever script is launched at container startup
in container you cannot run manual npm run server if the container does that
same as if pm2 autostarted on native os or virtual machine
-
@sdetweil
And what does that tell me now? Does that mean I can’t change anything…netatmo won’t work? -
@kusselin
Sorry I‘m out here because I do not have any experience with proxmox containers.But in general, what Sam means is that your last log-output indicates that you had tried to start a seond instance of MagicMirror -which fails.
So I guess it is necessary to identify the primary instance and look for logs there .
What I have seen in addition but cannot justify: Your above output looks like you‘re working with root permission.root@magicmirror-live:/opt/magicmirror# npm run serverAs far as I remember correctly, this may causes difficulties as well - at least I remember to read something like this - context was different and it‘s possible that this doesn‘t apply to container-environments …
Good luck!
Regards,
Ralf -
@kusselin no, just have to restart the container…
I am installing proxmox on a vmware VM now,
-
@kusselin so with the script I get a container starting to be built, but it has no network
I see it in the list, can start/stop. but no network.this is proxmox in a VM, not native on the hardware…
I did get a vmware warning that proxmox was trying to set promiscuous mode, but that is not allowed
-
@rkorell said in Netatmo module will not shown:
@kusselin
Sorry I‘m out here because I do not have any experience with proxmox containers.But in general, what Sam means is that your last log-output indicates that you had tried to start a seond instance of MagicMirror -which fails.
So I guess it is necessary to identify the primary instance and look for logs there .
What I have seen in addition but cannot justify: Your above output looks like you‘re working with root permission.root@magicmirror-live:/opt/magicmirror# npm run serverAs far as I remember correctly, this may causes difficulties as well - at least I remember to read something like this - context was different and it‘s possible that this doesn‘t apply to container-environments …
Good luck!
Regards,
RalfOne question: Do you have Netatmo installed and running at home as hardware and searching in MM…?
-
@sdetweil said in Netatmo module will not shown:
@kusselin so with the script I get a container starting to be built, but it has no network
I see it in the list, can start/stop. but no network.this is proxmox in a VM, not native on the hardware…
I did get a vmware warning that proxmox was trying to set promiscuous mode, but that is not allowed
Ok du hast dir die mühe gemacht einen proxmox container zu installieren und den MM dort zu installieren…danke erstmal für das machen und testen…
Heisst im Container läuft der NM nicht so wie er auf einem Raspberry läuft…richtig?
Heisdt am besten man installiert den MM auf einem Raspi, dann hat man nicht den Ärger…richtig?
Ich kann halt nicht verdtehen das hier keiner im Forum ist der auch netatmo als Modul installiert hat :-(
Englisch:
Ok you made the effort to install a proxmox container and install the MM there…thanks for doing and testing…That means the NM does not run in the container the way it runs on a raspberry…right?
It’s best to install the MM on a Raspi, then you don’t have the trouble…right?
I just can’t understand that there is no one here in the forum who has also installed netatmo as a module :-(
What do you mean by “no network”?
I have a connection and other modules are displayed correctly, so I don’t understand this
-
@kusselin said
One question: Do you have Netatmo installed and running at home as hardware and searching in MM…?
Nope, Netatmo not used by me …
Regards,
Ralf -
@kusselin no network
the script says there is no network card for the container so it cannot talk to anything
from the script output see <---- below__ ___ _ __ ____ / |/ /___ _____ _(_)____/ |/ (_)_____________ _____ / /|_/ / __ `/ __ `/ / ___/ /|_/ / / ___/ ___/ __ \/ ___/ / / / / /_/ / /_/ / / /__/ / / / / / / / / /_/ / / /_/ /_/\__,_/\__, /_/\___/_/ /_/_/_/ /_/ \____/_/ /____/ 🧩 Using Advanced Settings on node pve 🖥️ Operating System: debian 🌟 Version: 12 📦 Container Type: Unprivileged 🔐 Root Password: ******** 🆔 Container ID: 101 🏠 Hostname: magicmirror 💾 Disk Size: 3 GB 🧠 CPU Cores: 1 🛠️ RAM Size: 512 MiB 🌉 Bridge: vmbr0 📡 IP Address: dhcp 🌐 Gateway IP Address: Default 📡 APT-Cacher IP Address: Default 🚫 Disable IPv6: yes ⚙️ Interface MTU Size: Default 🔍 DNS Search Domain: Host 📡 DNS Server IP Address: Host 🏷️ Vlan: Default 📡 Tags: community-script;magicmirror 🔑 Root SSH Access: yes Warning: No SSH key provided. 🔍 Verbose Mode: yes 🚀 Creating a MagicMirror LXC using the above advanced settings ✔️ Using local for Template Storage. ✔️ Using local-lvm for Container Storage. ✔️ Updated LXC Template List ✔️ LXC Template is ready to use. ✔️ LXC Container 101 was successfully created. ✔️ Started LXC Container net.ipv6.conf.all.disable_ipv6 = 1 ⠇ ✖️ No Network! ner OS <---- ✖️ No Network After 10 Tries <--- 📡 Check Network Settings /dev/fd/63: line 72: SPINNER_PID: unbound variable
