MMM-Remote-Control

KristjanESPERANTO

@bloodknot Thanks for the quick feedback. Okay, that was still progress. Now please try v4.2.2.

bloodknot

@KristjanESPERANTO
That seems to have fixed my specific problem. Thank you!!!
I have tested:
http://magicmirror2:8080/api/monitor/on

bloodknot

@KristjanESPERANTO
Sorry for the split message.
I have successfully tested:
http://magicmirrorip:8080/api/monitor/on
http://magicmirrorip:8080/api/monitor/off
http://magicmirrorip:8080/api/refresh
http://magicmirrorip:8080/api/reboot
http://magicmirrorip:8080/api/alert/showalert

KristjanESPERANTO

@bloodknot Perfect, thank you for testing! 😃

vtek

hey guys…

having some issues using the shutdown/reboot commands…they throw this error, even though I have the API key in the config

{“success”:false,“message”:“Forbidden: API Key Not Provided!”}

here’s the config

            {
                    module: 'MMM-Remote-Control',
                    // position: 'bottom_left', // Required to show URL/QR code on mirror
                    // you can hide this module afterwards from the remote control itself
                    config: {
                            showModuleApiMenu: true,
                            secureEndpoints: true,
                            apiKey: "111111111-2222-3333-4444-555555555555",
                            customCommand: {
                                            monitorOnCommand: 'loginctl unlock-session 1',
                                            monitorOffCommand: 'loginctl lock-session 1',
                                            shutdownCommand: 'systemctl poweroff',
                                            rebootCommand: 'systemctl reboot',  // Optional, See "Using Custom Commands" below
                                            },

            }
            },

vtek

said in MMM-Remote-Control:

hey guys…

having some issues using the shutdown/reboot commands…they throw this error, even though I have the API key in the config

{“success”:false,“message”:“Forbidden: API Key Not Provided!”}

here’s the config

            {
                    module: 'MMM-Remote-Control',
                    // position: 'bottom_left', // Required to show URL/QR code on mirror
                    // you can hide this module afterwards from the remote control itself
                    config: {
                            showModuleApiMenu: true,
                            secureEndpoints: true,
                            apiKey: "111111111-2222-3333-4444-555555555555",
                            customCommand: {
                                            monitorOnCommand: 'loginctl unlock-session 1',
                                            monitorOffCommand: 'loginctl lock-session 1',
                                            shutdownCommand: 'systemctl poweroff',
                                            rebootCommand: 'systemctl reboot',  // Optional, See "Using Custom Commands" below
                                            },

            }
            },

i figure it out…had to append the apiKey at the end of the url for all commands
http://192.168.1.5:8888/api/command/rebootCommand?apiKey=111111111-2222-33333-4444