MMM-Memo - Add some memos on your page and manage them through HTTP request

[strawberry 3.141]

@ceddirr https://github.com/schnibel/MMM-Memo#to-temporary-display-the-second-memo-of-the-shopping-memo-note

[ceddirr]

@strawberry-3.141 Hi, Thank you for your quick reply =)
I am sorry I read this already, but I didn’t understand how to make my memo stay longer… :/
I have only one module with “memoDisplayNotification” set to “true”.
I understand the alert module is managing this with:
self.sendNotification(“SHOW_ALERT”, {});
But how to integrate this into the command
http://192.168.0.137:8080/DisplayMemo?memoTitle=SHOPPING&item=ALL
Thank you again!

[strawberry 3.141]

@ceddirr add the config option display_time to the alert module https://github.com/MichMich/MagicMirror/tree/master/modules/default/alert#configuration-options

[ceddirr]

Riiight, thank you very much! :D

[ceddirr]

Hi all,

Thank you again for your answer last time, playing with the option display_time from the alert module.

However, if you modify it, every alert would be modified. For exemple, if I want to set my memo to keep displayed for at least 30 secondes, I go modify the display_time from the alert module. But, all alerts like for example “welcome back Mr Blabla” when I switch profile will stay longer than usual.

The question is how do I have to do to only change the MMM-Memo alerts please?
Many thanks,
Cedric ;)

[schnibel]

Hi guys,
Just came back on the Internet, and I saw your messages.
@ceddirr, I’m sorry, but I didn’t develop a specific module for alerts as the existing one is quite nice… But I understand your problem.
When I had this DisplayMemo option, the idea was to temporarily display a long message, is it your case ?

[ceddirr]

Hi, thank you for getting back to me =)

Yes, the idea is basically the same, but I would just like to see the memo a little bit longer than the regular alert’s configuration.
The problem for me is if I change the display_time setting directly on the alert module, it would be too long for the other alert like “nice to see you %profile%”, etc lol

[strawberry 3.141]

@schnibel easiest soluton would be to replace notifications with alerts, as they can have a duration parameter, but the downside is there can be just one alert per module at the same time.

https://github.com/schnibel/MMM-Memo/blob/master/MMM-Memo.js#L123

to this.sendNotification("SHOW_ALERT", {title: ttl, message: msg, timer: 5000}); for 5 seconds or make a config option for it

[wireshark]

This post is deleted!

[dsegel]

@wireshark Try something like this in your ~/MagicMirror/css/custom.css file:

.MMM-Memo .note {
    font-size: 25px;
    font-family: "Roboto Condensed", sans-serif;
}

Note that I just picked that size (25px) out of the air; I have no idea what the default size is. You’ll have to experiment. Also not sure if the size option will even work (although I know the font-family option does).

[Vauxdvihl]

@schnibel
Thanks for this great module.
Can you please help me?
Unfortunately i am not able to run is (and i am sure that the prob sits in front of the pi)
It would help me a lot if somebody could share his working config (only the “alert” module" and from this "Memo one).
Thanks a lot for you help and support

[wireshark]

This post is deleted!

[nobita]

@schnibel , If I would like to make this module without use voice command (Jarvis)
and add event by manual (like default calendar module), or add event in google calendar

question: How to do it? Thanks for your help

[efl23]

Thanks for this great module.
but when I do this command “http://192.168.0.60:8080/AddMemo?memoTitle=SHOPPING&item=Fruits&level=INFO”, I have this message
“Cannot GET /AddMemo”
but this command “http://192.168.0.60:8080” show MagicMirror
Can you please help me?
Thanks a lot for you help and support

[efl23]

@efl23
Eureka, just a bad name of the module

[Janne]

Hi,

Just a help to other magic Mirror builders.

I have implemented this nice module. :smiling_face_with_heart-eyes:

When I send URL-request I got the error “No memo file found”. After some grumbling and deep dive I found that it was because my language was not supported (Danish).

I added my language-file under the translation directory and added the yellow line.

Hope it can be of help to others. :smiling_face_with_smiling_eyes:

[Crayyy]

I still am unable to add or modify the memos in any way :) I don’t understand how to use the HTTP command to pass commands to the module, Here is what I typed at the SSH command prompt. “http://192.168.1.175:8080/AddMemo?memoTitle=SHOPPING&item=Fruits&level=INFO” but I get the following errors and no memo on my mirror :( “-bash: http://192.168.1.175:8080/AddMemo?memoTitle=: No such file or directory
[7]- Exit 127 http://192.168.1.175:8080/AddMemo?memoTitle=SHOPPING
[8]+ Done item=Fruits” please help :)

[lovesicker]

@schnibel

Thank you for providing us this fantastic module! It’s so useful.

I have a suggestion: could you merge multiple instances of MMM-Memo into only one instance? Like the following:
{
module: ‘MMM-Memo’,
config{
{
memo1
memoTitle: XXXX
position:
},
{
memo2
memoTitle:YYYY
position:
},
…
}

Because there are six instances of MMM-Memo at least, the system performance will be affected and there are always many notifications about this module in console log when any notifications send by any modules.

[Robinson128]

Thank you for this module that I like a lot despite the harm I had to use it without Jarvis. :) beginner in computer science and big noob for HTML CSS and many other things. I search a little but I did not find how to make notes appear after each other in the same memo. The oldest note in 1 and the most recent in 2,3 or 4 and so on. Thanks for your help.
(Google traduction)

[WasupDude]

Such a usefull topic,thanks