[MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras

evroom

I will look if there is a module that can trigger linux commands at will.
Would be interested in that myself.

bill22

if we could find one, it could be probably used to start/stop the stream. On the other hand it could be an option to define several “stand alone streams” and call those individually. Position of the streams could be even offset to each other…Just a thought…

evroom

@bill22

Btw, do you “fancy” stuff like Voice Control or Alexa ?
I don’t, but those would be modules that could trigger something.

bill22

@evroom
me neither

evroom

@bill22

Hi,

I used this Sunday to setup a second Pi, whilst watching F1.
Used a new SD, installed Debian Buster and Magic Mirror v2.8.0.

After I made sure I did not have any errors after rebooting, restarting MM, etc, I setup MMM-RTSPStream.
It now works for Bucks Bunny, my IP cam and my SAT receiver.
I can even rotate 2 SAT channels.

I also tested the little fix with --audio_queue 4and that works to (although I cannot check audio, as I have no speaker).

It does not say that this method will work for you (my RTSP was dead as a dodo), but it could be something to consider.
I will play a bit with single quotes, double quotes, etc, as that is a potential problem in your URL.

And it still leaves the issue with selecting a channel at will, through a trigger.

bill22

@evroom

Hi and sorry for the late response.

Sounds pretty good and promising!

How do you “rotate” your SAT channels? Does it change based on time (after x seconds)?
For me it could be good enough to have a few channels to change, of course better to select from a small list.

evroom

@bill22
In the config part add

rotateStreams: true,
rotateStreamTimeout: 60,

and add 2 or more streams (stream1 and stream2).

BKeyport

Silly question - is there a way within the RTSP protocal to detect when the camera detects motion, so you can trigger something? What I was thinking is to flash the screen background if the camera sees motion…

Thanks!

twosquirrels

Is there a way to hide the play/pause button? I’m not using a mouse on my mirror so it’s useless. Also, i’s creating its own separate gigantic white box that doesn’t line up with my actual video stream (which I have to force its position using moduleOffset).

BKeyport

The white box is easy to get rid of:

In ~/MagicMirror/css/custom.css

/* This removes the white border around the RTSP feed(s). */
.MMM-RTSPStream .innerWrapper {
  border: 0;
}

As far as the play button, I’ve never seen it, so I don’t know how to get rid of it, I don’t use keyboard or mouse on my mirror.

FYI, other css that might be useful:

/* This shrinks the left and right regions so that RTSPStream don't overlap. */
.region.right .module-content,
.region.left .module-content {
  min-width: 450px;
  max-width: 450px;
}

– B

twosquirrels

@BKeyport That worked to remove the white box, thanks!

I’m still struggling with getting the module to just show where I want it. I don’t know why it doesn’t just listen to “position” like every other module where I can tell them all to be top_right and they’d all line up in the appropriate order. I’m fighting with moduleOffset entering random numbers to see if I can find a decent spot, but it still overlaps, causes indentation, and is just a mess. Then often times the module will just disappear after being on screen for a couple minutes.

BKeyport

Odd - I’m having no problem moving it around - although, if you’re using OMXPlayer, it’s overlaying on top of the screen, it won’t play nice with other modules in the same position…

osnapus

Hello, I’m Peter,
when I add RTSTStream to my MagicMirror, I have a little problem with RTSPStream module.

When display is in normal mode on 27’ screen, everything is ok, picture from Cam is good, normal dimensions etc
https://photos.app.goo.gl/czoZvwryGmqfJRDg6

But when in /boot/config.txt in rpi3 the display_rotation=1, picture form cam is cut like on screen.

https://photos.app.goo.gl/VRycUb7zMw9LQVxh6

Someone could help me with this problem?

Many thanks to You All
Peter

buzzkc

@osnapus

Try using the GL driver to rotate…
https://github.com/michmich/magicmirror/wiki/configuring-the-raspberry-pi#enable-the-open-gl-driver-to-decrease-electrons-cpu-usage

I’ll post my config.txt and autostart settings tonight, don’t have access to them right now.

acimail01

Is it possible to define a stream for playing a local file (e.g. .mp4 or .avi)?

acimail01

works with

		{
			module: "MMM-RTSPStream",
			position: "middle_center",
			config: {
				autoStart			: true,
				rotateStreams		: false,
				rotateStreamTimeout	: 30,
				moduleWidth			: 354,
				moduleHeight		: 240,
				localPlayer			: 'omxplayer',
				shutdownDelay		: 0,

					stream1: {
						name: 'Test Stream',
						url: 'file:///home/pi/MagicMirror/modules/MMM-RTSPStream/Videos/Feuer.mp4',
					},
				}
		},

but no sound !

in bash console works with: omxplayer -o alsa Feuer.mp4
How to set hdmi sound as default ?

p4lsec

Just wanted to cross-post this in case people are looking in this thread for a way to monitor and restart streams that have stopped:

https://forum.magicmirror.builders/topic/11828/short-script-to-monitor-and-restart-your-mmm-rtspstreams

kris1208

hello, I have a problem with this module, I have the displays which are truncated and this since the update.
bonjour, j’ai un probleme avec ce module, j’ai les affichages qui sont tronqué et ce depuis la mise a jour.
0_1577120359595_erreur miroir.jpg

Merci.

kris1208

nobody to tell me how to solve my cut image problem? Thank you

evroom

@kris1208

Perhaps you can share the config.js part for MMM-RTSPStream with us?

The pm2 log output for this module is useful too.
The part where it shows the applied coordinates.