[MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras

kasperb

@kasperb said in [MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras:

@cr4z33 said in [MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras:

@kasperb I actually added some code parts in the voice command module as per suggestion of its developer.

If you’re using MMM-AssistantMk2 then I can tell you what to do (not if using other modules). :)

Yes, I’m using MMM-AssistantMk2. Would love to hear your suggestion.

@Cr4z33 Thank you - this works perfect. Much appreciated.

Cr4z33

@kasperb you’re welcome however forgot to say that this was done by @Sean . ;)

shbatm

@cr4z33 said in [MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras:

“RTSP_ACTIVATE”: {
notificationExec: {
notification: “RTSP-PLAY”,
payload: “all”
}
},

Regarding the other issue we’ve been working through – I sent you a chat, but if you have this part in your config with the rest of the TV channels–take it out and see if that fixes the problem you’ve been having with the wrong stream.

I think this is being called by AssistantMk2 after calling the individual stream.

Cr4z33

@shbatm thank you mate deleting that part made everything work brilliantly!

Cr4z33

So I am having finally some spare time to explain better how to to switch stream by voice control (think at ie. IP cameras, Internet TV/Radio channels, etc.).

We are going to use OMXplayer here (can’t say how it will be the result with VLC honestly…) and the good voice command module MMM-AssistantMk2.
So set it up properly and once you have it up and running come back and go on reading, otherwise contact @Sean (the author of that module) asking for help. :)

Open config.js with a text editor and go to the MMM-AssistantMk2 module section.
Replace

			config: {

with

			config: {
					onActivate: {
							timer: 0,
							command: "RTSP_DEACTIVATE"
							},
					transcriptionHook: {
								"CHANNEL_1": {
										pattern: "TV 1",
										command: "CHANGE_CHANNEL_1"
										},
								"CHANNEL_2": {
										pattern: "TV 2",
										command: "CHANGE_CHANNEL_2"
										},
								"CHANNEL_3": {
										pattern: "TV 3",
										command: "CHANGE_CHANNEL_3"
										},
								"CHANNEL_4": {
										pattern: "TV 4",
										command: "CHANGE_CHANNEL_4"
										},
								"CHANNEL_5": {
										pattern: "Radio 1",
										command: "CHANGE_CHANNEL_5"
										},
								"CHANNEL_6": {
										pattern: "Radio 2",
										command: "CHANGE_CHANNEL_6"
										},
								"CHANNEL_7": {
										pattern: "Radio 3",
										command: "CHANGE_CHANNEL_7"
										}
								},
					command: {
							"CHANGE_CHANNEL_1": {
										notificationExec: {
													notification: "RTSP-PLAY",
													payload: "stream1"
													}
									},
							"CHANGE_CHANNEL_2": {
										notificationExec: {
													notification: "RTSP-PLAY",
													payload: "stream2"
													}
									},
							"CHANGE_CHANNEL_3": {
										notificationExec: {
													notification: "RTSP-PLAY",
													payload: "stream3"
													}
									},
							"CHANGE_CHANNEL_4": {
										notificationExec: {
													notification: "RTSP-PLAY",
													payload: "stream4"
													}
									},
							"CHANGE_CHANNEL_5": {
										notificationExec: {
													notification: "RTSP-PLAY",
													payload: "stream5"
													}
									},
							"CHANGE_CHANNEL_6": {
										notificationExec: {
													notification: "RTSP-PLAY",
													payload: "stream6"
													}
									},
							"CHANGE_CHANNEL_7": {
										notificationExec: {
													notification: "RTSP-PLAY",
													payload: "stream7"
													}
									},
							"RTSP_DEACTIVATE": {
										notificationExec: {
													notification: "RTSP-STOP",
													payload: "all"
													}
									},
					},

Please note that the aforementioned stream names (ie. “TV 1”) used after pattern: HAVE TO BE the same that we will use below in the MMM-RTSPStream module or it won’t work!
Of course they are all examples so fit them to your needs, but remember to use then the same naming.

So let’s go to enter MMM-RTSPStream like the following:

		{
			module: "MMM-RTSPStream",
			position: "bottom_right",
			disabled: false,
			config: {
				autoStart: false, // Streams will start by voice commands only
				rotateStreams: true,
				rotateStreamTimeout: 0,
				shutdownDelay: 0,
				moduleWidth: 420, // Adjust it to your needs
				moduleHeight: 236, // Adjust it to your needs
				localPlayer: 'omxplayer',
				remotePlayer: 'none',
				showSnapWhenPaused: false,
				remoteSnaps: false,
				stream1: {						
						name: 'TV 1',
						url: 'IPofstream1',
						protocol: "tcp",
						frameRate: 'undefined',
						width: 420, // Adjust it to your needs
						height: 236 // Adjust it to your needs
		            		},
				stream2: {						
						name: 'TV 2',
						url: 'IPofstream2',
						protocol: "tcp",
						frameRate: 'undefined',
						width: 420, // Adjust it to your needs
						height: 236 // Adjust it to your needs
		            		},
				stream3: {						
						name: 'TV 3',
						url: 'IPofstream',
						protocol: "tcp",
						frameRate: 'undefined',
						width: 420, // Adjust it to your needs
						height: 236 // Adjust it to your needs
		            		},
				stream4: {						
						name: 'TV 4',
						url: 'IPofstream',
						protocol: "tcp",
						frameRate: 'undefined',
						width: 440, // Adjust it to your needs
						height: 247 // Adjust it to your needs
		            		},
				stream5: {						
						name: 'Radio 1',
						url: 'IPofstream',
						protocol: "tcp",
						frameRate: 'undefined',
						width: 420, // Adjust it to your needs
						height: 236 // Adjust it to your needs
		            		},
				stream6: {						
						name: 'Radio 2',
						url: 'IPofstream6',
						protocol: "tcp",
						frameRate: 'undefined',
						width: 440, // Adjust it to your needs
						height: 247 // Adjust it to your needs
		            		},
				stream7: {						
						name: 'Radio 3',
						url: 'IPofstream7',
						protocol: "tcp",
						frameRate: 'undefined',
						width: 420, // Adjust it to your needs
						height: 236 // Adjust it to your needs
		            		}

This should be all.
You can add as many streams as you want (I don’t see the problem if you run them one by one). ;)

costascontis

i am using the develop branch of the module with vlc and latest MM.The feed is playing alright but it seems it is over MM and when i click over another module the feed dissapears going under.How can i solve that?

bhepler

@costascontis - There may be a switch in VLC player that tells it to stay on top. I’d start looking at switches there.

website19880927

this is my configuration:
{
module: “MMM-RTSPStream”,
position: “middle_center”,
header: “cam”,
config: {
autoStart: true,
rotateStreams: true,
rotateStreamTimeout: 10,
moduleWidth: 354,
moduleHeight: 240,
localPlayer: ‘omxplayer’,
remotePlayer: ‘none’,
showSnapWhenPaused: true,
remoteSnaps: true,
stream1: {
name: ‘c1’,
url: ‘rtsp://admin:a1234567@192.168.1.14/Streaming/Channels/1’,
frameRate: ‘undefined’,
hdUrl: ‘rtsp://admin:a1234567@192.168.1.14/Streaming/Channels/1’,
snapshotType: ‘url’,
snapshotRefresh: 10,
width: 354,
height: 240,
},
}
}

no response ,was it the problem of resolution，and how to configure that ,I tried many ways and still not success, and I can use my vlc to get the stream of the camera ,but was anything wrong with other configuration,no idea!

Cr4z33

@website19880927 said in [MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras:

localPlayer: ‘omxplayer’

Try using VLC instead.

Replace
localPlayer: ‘omxplayer’
with
localPlayer: ‘vlc’

However you will have to use the developer branch of this module.

See here for instructions on how to install it:
https://github.com/shbatm/MMM-RTSPStream/tree/develop

I didn’t test 4K streaming, but it should be OK up to 1080p.

Niggich

Hey Guys,

any Solution to install the Modul at Ubuntu without Omxplayer? The option with vlc sounds good…