Electron CPU usage

Sandy2503

@cruunnerr - I `ve done it !
without previous Unistall

i have downgraded with:

sudo npm install -g electron@1.4.15

Sandy2503

cruunnerr

Well,

i had MM 2.1.2 installed, so i needed to use the 2.1.0 way…

but i actually got it running with “DISPLAY=:0 npm start”

then i just copied the installed modules folders to the new directory and copied my “old” config.js but that didn’t work.

i actually install the 3rd party modules manual. hopefully my old config.js will work then.

But thank you anyway

edit:

so,

i got MM2.1.0 running with electron 1.4.15

have had a few problems, but now all works great.

knubbl

Bad issue with electron. When i downgrade to 1.4.15 the default calender module does not work

ok…calendar works fine

cruunnerr

Cause i didn’t want to run 2.1.0 and also got many errors every time i looked in the logs, i decided to do a fresh install and try again.

So i just installed a fresh Raspbian stretch lite and followed this guide: https://github.com/MichMich/MagicMirror/wiki/Jessie-Lite-Installation-Guide

after the first start i got 80-85% cpu usage just playing the default modules.

so i went into my MagicMirror folder and just typed “npm install electron@1.4.15”.
It said that the version seems to be invalid, but after a reboot i tooled a look in the
“/home/pi/MagicMirror/node_modules/electron/dist/version”
and saw a 1.4.15 shown.

thats all.

so in my experience its just the electron version needed to downgrade. Neither the OS nor the MagicMirror Version needs to be downgraded.

Loaded up a video: https://youtu.be/ak_mEMuLpYc

shows “nmon-stats” while adding Traffic- and News-Module via Remote Control
Still shows peaks when animation comes, but its fluety anyway

WeatherGeek

I have been having the issue, thanks so much for all the detailed information! I am going to do a fresh install with Jessy and downgrade Electron and MM2.

mattn

First off, apologies for the necro! But I had to reinstall MM this weekend and came across this same issue. After a fair bit of time reinstalling/googling, I managed to resolve it by adding the following to /etc/environment

ELECTRON_FORCE_WINDOW_MENU_BAR=1

So thought I’d post it here in case anyone else experiences this.
I’ve had the default install running for a while since adding the fix and my load avg has dropped from 6+ to “0.00, 0.02, 0.02” and electron seems to peak at around 7% every ~30s for about 2s. The rest of the time it isn’t even visible in top’s list.

credit to reddit: https://www.reddit.com/r/kde/comments/5x9t7j/electron_app_high_cpu_usage/
Edit: After adding my usual modules, electron’s CPU usage has gone up to a fairly constant ~9% across 3 processes.

top - 00:04:33 up 25 min,  3 users,  load average: 0.06, 0.13, 0.13
Tasks: 156 total,   2 running, 154 sleeping,   0 stopped,   0 zombie
%Cpu(s):  2.0 us,  0.4 sy,  0.0 ni, 97.6 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
KiB Mem:    947732 total,   486072 used,   461660 free,    26476 buffers
KiB Swap:   102396 total,        0 used,   102396 free.   240288 cached Mem

  PID USER      PR  NI    VIRT    RES    SHR S  %CPU %MEM     TIME+ COMMAND
 1387 pi        20   0  300260  98384  55840 S   4.9 10.4   0:45.48 electron
 1394 pi        20   0  286500  68700  49420 S   2.0  7.2   0:23.08 electron
 1358 pi        20   0  436408  78528  57656 S   1.0  8.3   0:19.25 electron

Edit2: Left it running over night, and it’s stable:

top - 07:51:22 up  8:12,  3 users,  load average: 0.24, 0.23, 0.17
Tasks: 153 total,   1 running, 152 sleeping,   0 stopped,   0 zombie
%Cpu(s):  2.1 us,  0.3 sy,  0.0 ni, 97.5 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
KiB Mem:    947732 total,   543280 used,   404452 free,    34664 buffers
KiB Swap:   102396 total,        0 used,   102396 free.   271040 cached Mem

  PID USER      PR  NI    VIRT    RES    SHR S  %CPU %MEM     TIME+ COMMAND
 1798 pi        20   0  301180  99652  56580 S   5.3 10.5  22:54.84 electron
 1805 pi        20   0  321060  79368  50868 S   2.6  8.4  11:36.49 electron
 1770 pi        20   0  480972  82744  58648 S   1.0  8.7   7:20.91 electron

Doum

@mattn I am pretty new to linux/raspbian… I do not have any file/folder under /etc with the name environment?

Should i create a file and add this line in? add it somewhere else?

Thanks

nparab

Thanks v.much to everyone on this forum. I just downgraded Electron to 1.4.15, without downgrading either MagicMirror2 or my OS, and my CPU usage and temperature are significantly down. But I’m facing yet another problem because of this downgrading of Electron. My MMM-PIR-Sensor module is giving this error:

App threw an error during load
Error: Module version mismatch. Expected 50, got 54.
    at Error (native)
    at process.module.(anonymous function) [as dlopen] (ELECTRON_ASAR.js:173:20)
    at Object.Module._extensions..node (module.js:583:18)
    at Object.module.(anonymous function) [as .node] (ELECTRON_ASAR.js:173:20)
    at Module.load (module.js:473:32)
    at tryModuleLoad (module.js:432:12)
    at Function.Module._load (module.js:424:3)
    at Module.require (module.js:483:17)
    at require (internal/module.js:20:19)
    at bindings (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/bindings/bindings.js:81:44)
Whoops! There was an uncaught exception...
Error: Module version mismatch. Expected 50, got 54.
    at Error (native)
    at process.module.(anonymous function) [as dlopen] (ELECTRON_ASAR.js:173:20)
    at Object.Module._extensions..node (module.js:583:18)
    at Object.module.(anonymous function) [as .node] (ELECTRON_ASAR.js:173:20)
    at Module.load (module.js:473:32)
    at tryModuleLoad (module.js:432:12)
    at Function.Module._load (module.js:424:3)
    at Module.require (module.js:483:17)
    at require (internal/module.js:20:19)
    at bindings (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/bindings/bindings.js:81:44)

Any help on fixing this would be appreciated.

nparab

Fixed it! I just went to the modules/MMM-PIR-Sensor directory and did

npm install

That fixed it.

mattn

@Doum Yeah, just create the file, paste that line, save and reboot.