Motion Detector

danielis

Not working here. Only either one or the other.
But paviro said he will include a motion detection to the facial recognition module at some time.
I will try to do it also. Will report if I have success

oscarkindberg

Hi!

I’m trying to get this to work, have a USB cam attached to the RPI3 and installed the .js.
But when I add the code:

{
module: ’motiondetector’,
config:
}
}

Am I missing something? Because it only give me errors… :(

(new to this)

in_a_days

@oscarkindberg Try this instead:

            {
                    module: 'motiondetector',
                    config: {
                            timeout: 300000 // time in milliseconds for to switch off the display after last movement is detected.
                    }
            },

This is set for a 5 minute delay. Modify the timeout value if you want a longer or shorter delay before your screen turns off.

oscarkindberg

@in_a_days Hit! Works now, BUT next issue.
After 5-6 min the screens goes white, can’t find anything in the code that would cause that.

phoenixrising

I apologize if this a very noob question but I am having trouble getting the motion detector module running. I have clone the files to the module folder. I have modified the config file but maybe I dont have it correct. Could some one show me how the config file be modified to get the module running. Any other pointers? Thank you,

danielis

@oscarkindberg try hdmi_blanking=1in /boot/config.txt

danielis

@phoenixrising look at the last reply of in_a_days.
If that is not working post your config.js here.

oscarkindberg

@danielis Where do I fint that? I’ve searched all the .js files in the module and config.

danielis

@oscarkindberg it is the file config.txt in the folder /boot/
type ‘sudo nano /boot/config.txt’ without ’
add as last line:
hdmi_blanking=1

oscarkindberg

@danielis Actually got it to work now, changed to “updateInterval: 10000” from “updateInterval: 1000” and in diff-cam-engine.js I changed captureIntervalTime to 1000 instead of 100.

Made it easier on the RBP3 i think.
Downloaded MMM-SystemStats to keep check on sysload during config and it’s lookin’ good now.
Thanks for the help! I’ll comeback with a picture of the mirror as soon as my mirrorglas arrives.