Motion Detector

[strawberry 3.141]

this sounds that your cam is not getting recognized as a valid webcam

[cowboysdude]

@strawberry-3.141 said in Motion Detector:

this sounds that your cam is not getting recognized as a valid webcam

I am using the NOIR Picamera that’s interesting because outside the module the camera works fine LOL

Hummmmmmm…

[strawberry 3.141]

can you guys try sudo modprobe bcm2835-v4l2 in the console before starting the mirror

[trividar]

I got this error:

[strawberry 3.141]

strange this is the driver for the camera module

do you have enabled the camera module?

[trividar]

Yes I have… And the camera works, i can take picutres abd see live pictures.

[strawberry 3.141]

then it’s really strange that you can’t find the driver, did you wrote v412 or v4l2 ?

looks like you typed 1 but it should be a lowercase L

[trividar]

This post is deleted!

[trividar]

Now It works… juhuuuuuuuuuuu;o) My monitor turn off… and recognize motion and turns on. In dev Mode i see now also motions!

[strawberry 3.141]

hopefully this works for @cowboysdude as well

[cowboysdude]

I just typed in the sudo modprobe bcm2835-v4l2 and it returned nothing so I’m guessing that’s a good thing LOL

[cowboysdude]

So this is what I’ve done and it solved it…

I took your sudo modprobe bcm2835-v4l2 and entered before I started the mirror and no more error so I started the mirror in dev and it was registering movement…Great!

So I closed the mirror and restarted… same error, driver not loaded…

so I did this in case of a power out,e tc…in a terminal window:

sudo crontab -e

Enter this on the last line:

@reboot sudo modprobe bcm2835-v4l2

Saved and exited.
Reboot
Restart mirror in dev mode
NO error and tracks movement
close mirror and restart in dev
NO error and tracks movement.

PROBLEM SOLVED!! Thank you guys for being patient!! It’s working.

[trividar]

Thank you guys! you are amazing!

[sero]

Same here, works like a charm!
Thanks guys :)

[alexyak]

Huge thank you to @strawberry-3-141 for helping to troubleshoot this issue and suggesting the solution! While I know all kinds of dev languages and tools, I am pretty new RPI and Linux.

[trividar]

Hi guys,
I have a problem. My MM do not turn on the display in the morning. I is possible that my pi camera is in a kind of sleepmode or standby? I have to restart with pm2 stop mm and start again an than it works fine.

[cowboysdude]

@trividar said in Motion Detector:

Hi guys,
I have a problem. My MM do not turn on the display in the morning. I is possible that my pi camera is in a kind of sleepmode or standby? I have to restart with pm2 stop mm and start again an than it works fine.

I have encountered that MANY times… don’t exactly know why myself… It’s not just this module it happens with most of them… I believe once it sleeps long enough the PI doesn’t want to wake up LOL

[cpramhofer]

Hi Guys,

had exactly the same problem with mit Raspi NOIR Cam V2.1.
the sudo modprobe bcm2835-v4l2 command solved my problem.

maybe you should add this Tipp in your Readme as many people out there have the same problem.

greets
Christoph

[trividar]

Hi Christoph
Unfortunately it didn’t work for me;o( Today my screen did not turn on. My Pi works and I can connect over ssh but I have to stop and start my MM and thank works again fine. I just think that my camera stop working if there is no motion a long time (during night).

I got some errors during the night:

[alihallo]

First of all, I also had the problem which could be solved by adding

@reboot sudo modprobe bcm2835-v4l2

at the last line of the crontab. Thank you very much!

It works fine for some hours, but suddenly the monitor does not show up again.
I cannot see error messages, but the following commands does not get an answer anymore…

/opt/vc/bin/tvservice -s

There is no return value anymore, it is just loading forever.
In the log it looks like this:

mm-0 monitor :state 0x12000a [HDMI CEA (16) RGB lim 16:9], 1920x1080 @ 60.00Hz, progressive
mm-0 monitor has been activated
mm-0 monitor :state 0x120002 [TV is off]
mm-0 monitor has been deactivated
mm-0 monitor :state 0x12000a [HDMI CEA (16) RGB lim 16:9], 1920x1080 @ 60.00Hz, progressive
mm-0 monitor has been activated
mm-0 monitor :state 0x120002 [TV is off]
mm-0 monitor has been deactivated
mm-0 monitor :state 0x12000a [HDMI CEA (16) RGB lim 16:9], 1920x1080 @ 60.00Hz, progressive
mm-0 monitor :
mm-0 monitor :
mm-0 monitor has been deactivated
mm-0 monitor :

As soon as the problem occures, the command

/opt/vc/bin/tvservice --preferred && sudo chvt 6 && sudo chvt 7

also does not switch the monitor on again.
It seems that the tvservice command just got a problem after some hours… Any idea how to solve this?
I need to restart the pi to get the monitor on again, after that everything works fine for some hours…

Best regards,
alihallo