[octomirror-module] Monitor & Control an OctoPrint 3D Printer Server

citizendevpi

}, {
        module: "octomirror-module",
        position: "bottom_left",
        config: {
            url: "http://192.168.2.141",
            api_key: "B7ACF3C4BDD04D61BF5176C75778661E",
        }
    },

so i obviously cannot figure out how to copy paste my config i feel like i have some issues

citizendevpi

@shbatm yes I have enabled the API as you can c it is in my config

shbatm

@citizendevpi Try adding debugMode: true, to the config and see if you get any useful information in the logs. I can’t remember if they’ll show up in the console or DevTools. Also, it’s been a while since I’ve used the module, but it will only show data when it’s actually printing too.

michael24h

@citizendevpi said in [octomirror-module] Monitor & Control an OctoPrint 3D Printer Server:

url: “http://192.168.2.141”
Looks like link isn’t complete. Should looks like this http://ip_address/webcam/?action=stream

{
        module: 'MMM-MotionEye',
        position: 'top_right',
            config:  {
            width: "460px",
            autoHide: false,
            url: "http://octoprint IP address/webcam/?action=stream",
            debug: false,    
            user: "pi"  
        }
    },

I hope this will help you

michael24h

Try open octoprint > go to webcam > then open image in new tab. and copy http address from web browser to your config file in octomirror-module.

shbatm

@michael24h said in [octomirror-module] Monitor & Control an OctoPrint 3D Printer Server:

Looks like link isn’t complete. Should looks like this http://ip_address/webcam/?action=stream

Nope, that shouldn’t be it. He said his stream was working and the url parameter is just for the octopi instance, not the stream. The module assumes it needs to add /webcam/?action=stream” unless streamUrl is provided.

shbatm

@citizendevpi

Just confirming: you are using my version https://github.com/shbatm/octomirror-module not the original, correct?

citizendevpi

@shbatm let me check and yes u are correct I do have my stream no problem but no info and I would only expect it to give me stats when printing

citizendevpi

@shbatm yes shbatm/octomirror-module

citizendevpi

This post is deleted!

citizendevpi

Any help

shbatm

@citizendevpi said in [octomirror-module] Monitor & Control an OctoPrint 3D Printer Server:

Any help

Sorry, I haven’t had a chance to fire up my printer and take a look yet. Going to try in the next few days. They’ve probably updated something in Octoprint that broke it.

One thing I did think of to have you check on: make sure you have Allow CORS turned on in your Octoprint settings.

shbatm

@michael24h @citizendevpi Please update the module to the latest version and give it a try.

Short version: OctoPrint changed the way the API login works.
Long version: The new bundled OctoPrint plugin ForceLogin now requires the API to get a session ID and send it back to the socket before it will send any detailed messages. Detailed here and here.

citizendevpi

@shbatm so how do i fix it? add some more info in config or ???

shbatm

@citizendevpi said in [octomirror-module] Monitor & Control an OctoPrint 3D Printer Server:

how do i fix it?

Update the module. You shouldn’t need to add anything else.

cd ~/MagicMirror/modules/octomirror-module
git fetch 
git pull

SEMPL3X

Hey @shbatm Thanks for the module! It is soo great! But i have one question. When the Printer and Octoprint is Offline, but my MM runs, it is offline ok but when i start the Printer and octoprint it says in MM that the printer is offline. How can i fix that ? :) Hope u see this :D

jay.j.flynn

Is there a way to hide the module when the printer is offline?

TheMysticle

@jay-j-flynn Hi if you still have this running did you actually get it to work? I can’t get mine to display anything. It’s like it doesn’t connect to octopi.

Fozi

@TheMysticle First I also couldn’t make the module work until I did the following:

Entered in config.js the IP-address of the RPi OctoPrint runs on
Enter the API key without any brackets (the ReadMe.md was a bit misleading)

My config looks like this:

{
        module: "octomirror-module",
        position: "middle_center",
        config: {
            url: "http://192.168.0.123",
            printerName: "Ender 3 Pro",
            interactive: false, // Set to false to hide the file drop down and only show the stream.
            api_key: "1234567890ABCDEFGHI"
        }
    },

Davido

Hi, I have the same problem as @TheMysticle . I have tried changing nearly everything, but the only thing i got is the Camera Stream. The Api must be working, because i use this also in my Home Assistant and there i got all the Informations.
The Installation was made from https://github.com/shbatm/octomirror-module

Here is my config

{
				module: "octomirror-module",
				position: "bottom_left",
				config: {
					url: "http://192.168.0.97",
					api_key: "1234567890ABCDEF",
					printerName: "Ender 3",
					showTemps: true,
					showDetailsWhenOffline: true,
					interactive: false, // Set to false to hide the file drop down and only show the stream.
						}
				},

Maybe someone has an Idea