[octomirror-module] Monitor & Control an OctoPrint 3D Printer Server

[michael24h]

My stream showing upside down. any idea ?

[michael24h]

this works for me:
div.octomirror-module img {
transform: rotate(180deg);

[d3r]

Installed this on my pi3 for the Mp select mini today. This is great!

[citizendevpi]

I can not seam to get the informatin to show up all items say n/a but my video shows no problem, would realy apricate any help

[shbatm]

Can you please post your config section? Have you enabled the API and provided an API key?

[michael24h]

@shbatm said in [octomirror-module] Monitor & Control an OctoPrint 3D Printer Server:
please post your config section

[citizendevpi]

@shbatm

}, {
        module: "octomirror-module",
        position: "bottom_left",
        config: {
            url: "http://192.168.2.141",
            api_key: "B7ACF3C4BDD04D61BF5176C75778661E",
        }
    },

so i obviously cannot figure out how to copy paste my config i feel like i have some issues

[citizendevpi]

@shbatm yes I have enabled the API as you can c it is in my config

[shbatm]

@citizendevpi Try adding debugMode: true, to the config and see if you get any useful information in the logs. I can’t remember if they’ll show up in the console or DevTools. Also, it’s been a while since I’ve used the module, but it will only show data when it’s actually printing too.

[michael24h]

@citizendevpi said in [octomirror-module] Monitor & Control an OctoPrint 3D Printer Server:

url: “http://192.168.2.141”
Looks like link isn’t complete. Should looks like this http://ip_address/webcam/?action=stream

{
        module: 'MMM-MotionEye',
        position: 'top_right',
            config:  {
            width: "460px",
            autoHide: false,
            url: "http://octoprint IP address/webcam/?action=stream",
            debug: false,    
            user: "pi"  
        }
    },   

I hope this will help you