Read the statement by Michael Teeuw here.
Display Help
-
@Mykle1 ok i will try that and see if it makes a difference. Could it be in the main.css? i just dont under stand why it wants to stay in the upper 1/4 of the monitor
-
No, that belongs in the custom.css file. You should not be editing the main.css file unless you absolutely know what you are doing. That’s why I asked if you made any changes to the MM system files.
-
@Mykle1 ok i see what you are saying. no i’ve not edited it. looked at it but not made changes. just the custom
-
Someone will know how to solve your issue. I’m sure of it.
-
@Mykle1 hah i hope so, i’ve been going at this for about 3 hours now. not just the resolution issue but configuring modules and what not.
-
Be patient. Someone will help you when they find this topic. Take your time with the modules. It gets easier with time
-
@hnperkins said in Display Help:
disable_overscan=1
hdmi_group=1
hdmi_mode=16Just curious. Have you tried without this?
-
@Mykle1 yeah originally i just a clean boot and left everything stock from the install of noobs, that was just one of the things i had found to try via searching the forums and google
-
ok, cool. And the custom res was because Raspbian did not support your res? Was there a res close to what you wanted?
-
@Mykle1 no i just tried the custom because on first boot it was exactly how it is in the picture so i tried the custom and nothing changed. i just tried again with an empty custom and its still doing the same thing. almost tempted to start all over from fresh
