So ... to update MagicMirror I would ... ??



  • cd into the magicmirror folder and run:

    sudo apt-get update

    or

    sudo apt-get upgrade

    do I then have to run npm install???

    Thanks for the help

    chef



  • @chef

    If you want to update your MagicMirror² to the latest version, use your terminal to go to your Magic Mirror folder and type the following command:
    
    git pull && npm install
    
    If you changed nothing more than the config or the modules, this should work without any problems. Type git status to see your changes, if there are any, you can reset them with git reset --hard. After that, git pull should be possible.
    


  • I’ve just applied the latest update and get a blank, black screen.

    If I kill electron, I get back to the Pi desktop, until electron auto restarts.

    Any advice on how to get MM back again, please?

    Thanks!


  • Module Developer

    Also my MagicMirror is a blank screen. Will not start again



  • many thanks ;)



  • Same issue, i´ve updated and got a black screen.



  • PIR disabled in config (as a precaution, elimination)
    Pi shutdown, powered off, and restarted.
    MM Still blank on Pi.
    MM OK on a LAN PC, via :8080

    Logs:

    pi@raspberrypi:~ $ pm2 log mm
    [TAILING] Tailing last 15 lines for [mm] process (change the value with --lines option)
    /home/pi/.pm2/logs/mm-error-0.log last 15 lines:
    0|mm       |     at exports._exceptionWithHostPort (util.js:1047:20)
    0|mm       |     at Server.setupListenHandle [as _listen2] (net.js:1319:14)
    0|mm       |     at listenInCluster (net.js:1367:12)
    0|mm       |     at doListen (net.js:1493:7)
    0|mm       |     at _combinedTickCallback (internal/process/next_tick.js:141:11)
    0|mm       |     at process._tickCallback (internal/process/next_tick.js:180:9)
    0|mm       |     at Function.Module.runMain (module.js:607:11)
    0|mm       |     at startup (bootstrap_node.js:167:16)
    0|mm       |     at bootstrap_node.js:589:3
    0|mm       |   code: 'EADDRINUSE',
    0|mm       |   errno: 'EADDRINUSE',
    0|mm       |   syscall: 'listen',
    0|mm       |   address: '0.0.0.0',
    0|mm       |   port: 8080 }
    0|mm       | [1745:0401/150319.460996:FATAL:bus.cc(1189)] D-Bus connection was disconnected. Aborting.
    
    /home/pi/.pm2/logs/mm-out-0.log last 15 lines:
    0|mm       | You're using a full whitelist configuration to allow for all IPs
    0|mm       | Server started ...
    0|mm       | Connecting socket for: MMM-MyTemps
    0|mm       | Starting module helper: MMM-MyTemps
    0|mm       | Connecting socket for: updatenotification
    0|mm       | Connecting socket for: calendar
    0|mm       | Starting node helper for: calendar
    0|mm       | Connecting socket for: newsfeed
    0|mm       | Starting module: newsfeed
    0|mm       | Sockets connected & modules started ...
    0|mm       | Launching application.
    0|mm       | Create new calendar fetcher for url: https://calendar.google.com/calendar/ical/[###################] Interval: 300000
    0|mm       | Create new calendar fetcher for url: https://calendar.google.com/calendar/ical/[##############}/basic.ics - Interval: 300000
    0|mm       | Create new news fetcher for url: http://feeds.reuters.com/reuters/UKTopNews - Interval: 120000
    0|mm       | Create new news fetcher for url: http://feeds.skynews.com/feeds/rss/world.xml - Interval: 120000
    


  • Yep. I see I’m not the only one with a blank screen…
    I did the git pull && npm install. It went through with only two warnings. Then after pm2 restart mm.sh I got the blank screen. I see that there is an npm-debug.log that contains some errors:

    14 verbose stack Error: magicmirror@2.3.0 start: sh run-start.sh
    14 verbose stack Exit status 1
    14 verbose stack at EventEmitter. (/usr/lib/node_modules/npm/lib/utils/lifecycle.js:255:16)
    14 verbose stack at emitTwo (events.js:106:13)
    14 verbose stack at EventEmitter.emit (events.js:191:7)
    14 verbose stack at ChildProcess. (/usr/lib/node_modules/npm/lib/utils/spawn.js:40:14)
    14 verbose stack at emitTwo (events.js:106:13)
    14 verbose stack at ChildProcess.emit (events.js:191:7)
    14 verbose stack at maybeClose (internal/child_process.js:920:16)
    14 verbose stack at Process.ChildProcess._handle.onexit (internal/child_process.js:230:5)
    15 verbose pkgid magicmirror@2.3.0
    16 verbose cwd /home/pi/MagicMirror
    17 error Linux 4.4.43-v7+
    18 error argv “/usr/bin/node” “/usr/bin/npm” "start"
    19 error node v6.12.3
    20 error npm v3.10.10
    21 error code ELIFECYCLE
    22 error magicmirror@2.3.0 start: sh run-start.sh
    22 error Exit status 1
    23 error Failed at the magicmirror@2.3.0 start script ‘sh run-start.sh’.

    Any help would be appreciated.
    Harry


  • Module Developer

    I returned from a copied img from my sd card to an older version and only did

    git pull
    

    didn’t do the

    npm install
    

    at least now it works again



  • strange I’m not seeing a black screen.

    Perhaps an issue with the auto start script? But I’m unsure.

    Electron was updated in this release as well.


Log in to reply
 

Looks like your connection to MagicMirror Forum was lost, please wait while we try to reconnect.