Read the statement by Michael Teeuw here.
MMM-voice setup but MagicMirror wont display
-
Hi everyone. am so new at this its scary - but that said, I have manged to build my own MM with a few added 3rd party modules, and I managed to change the notifications to be more personalized. I have managed to install MMM-voice, and written in the MagicMirror config/config.js file as directed, but I can’t get the MM to display any more. please can someone help me?
I really would appreciate your time … many many thnx!{ module: "MMM-voice", position: "bottom_bar", config: { microphone: 1, ... } },
-
Remove the …
-
@cyberphox wow that was a fast response! thank you
ok, removed the … MM now works but shows a microphone and says error.
What have I done wrong? -
I have my mic plugged into a USB sound card on my pi. Is that ok, or should I plug it directly into the audio of the pi? My mic is not a USB connection.
-
Run this from terminal
cat /proc/asound/cards
and see if your microphone is listed as : 1
-
@cyberphox said in MMM-voice setup but MagicMirror wont display:
cat /proc/asound/cards
this is the response:
pi@raspberrypi:~ $ cat /proc/asound/cards
0 [ALSA ]: bcm2835_alsa - bcm2835 ALSA
bcm2835 ALSA
pi@raspberrypi:~ $ -
@cyberphox said in MMM-voice setup but MagicMirror wont display:
cat /proc/asound/cards
the one above I took the USB sound card out and plugged the mic directly to the pi.
this one I did your command again with the sound card in the USB slot and mic connected to USB sound card:
pi@raspberrypi:~ $ cat /proc/asound/cards
0 [ALSA ]: bcm2835_alsa - bcm2835 ALSA
bcm2835 ALSA
1 [Device ]: USB-Audio - USB Audio Device
GeneralPlus USB Audio Device at usb-3f980000.usb-1.3, full speed -
I have gone onto the pi itself and chossen the usb as an audio device with clicking microphone and microphone capture… but still shows the “error” in MM display.
-
and you ran the dependencies script from the installers folder?
-
mine was error cause i accidentally cloned into MMM-Voice…capital V and it didnt create the dic file…
maybe try running npm start dev and see what errors you have in the console